Operating Instructions

84
Outputting Using a picture as wallpaper
Using a picture as wallpaper
1 Select [ ] as the output destination. (74)
• The picture formats that can be used as Wallpaper are
BMP, JPEG and TIFF.
• Only one picture can be set.
2 Select the display position with and click .
z You can select a desired display position from
among the following.
[Stretch]:
The picture to be displayed is expanded as large as the
desktop.
[Center]:
The picture is displayed on the center of the desktop.
[Tile]:
The picture is duplicated and laid on the entire screen.
• If the selected picture is larger than the desktop size, a
message asking whether or not the picture size is
changed will appear. If you want to change the picture
size to the desktop size to use the picture as
wallpaper, click [Yes].
 If the wallpaper is not displayed, click the desktop and press
the [F5] key, and it will be displayed.
 When the aspect ratio of the picture set as wallpaper is
different from that of the display of your PC, the picture may be
stretched vertically or horizontally. In this case, set [Picture
Display] to [Center] or [Tile].
 [PHOTOfunSTUDIO wallpaper] will be created on the desktop
setting window of the PC.