Operating instructions

12
VQT3B62
Specifications
Signal system: PAL/NTSC
Operating temperature range:
i5 oC to i35 oC
Operating humidity range:
10 % to 80 % RH (no condensation)
Video output: 1.0 Vp-p (75 ≠)/Pin jack:1 system
Audio output: 2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors : 2 channel:1 system
Digital audio output:
Optical digital output (Optical terminal)
HDMI AV output: Type A (19 pin) [BDT310] : 2 system
[BDT210] [BDT111] [BDT110] : 1 system
This unit supports “HDAVI Control 5” function.
SD card slot: Connector : 1 system
USB slot: USB2.0 : 2system
Ethernet: 10BASE-T/100BASE-TX : 1 system
WLAN [BDT310] [BDT210]
Standard Compliance:
IEEE802.11n / IEEE802.11a / IEEE802.11g /
IEEE802.11b
Transmission system: OFDM system, DSSS system
Frequency range:
IEEE802.11n / IEEE802.11a :
5.15 GHz to 5.35 GHz
5.47 GHz to 5.725 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n :
2.4 GHz to 2.4835 GHz
Access Mode: Infrastructure mode
Security: WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
(
This unit supports WPA and WPA2 encryption.)
LASER Specification
Class 1 LASER Product:
Wave length:
790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:No hazardous radiation is emitted with the
safety protection
Power supply: AC 220 to 240 V, 50 Hz
Power consumption: [BDT310] : Approx. 13 W
[BDT210] [BDT111] [BDT110] : Approx. 11 W
Power consumption in standby mode:
Approx. 0.2 W
Power consumption in quick start standby mode:
[BDT310] : Approx. 4.3 W
[BDT210] [BDT111] [BDT110] : Approx. 3.3 W
Dimensions (WkDkH) Including the projecting parts:
430 mmk185 mmk35 mm
Mass: Approx. 1.6 kg
Specifications are subject to change without notice.
Information for Users on Collection and Disposal of
Old Equipment and used Batteries
These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical and
electronic products and batteries should
not be mixed with general household
waste.
For proper treatment, recovery and
recycling of old products and used
batteries, please take them to applicable
collection points, in accordance with your
national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent any
potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of
old products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
For business users in the European
Union
If you wish to discard electrical and
electronic equipment, please contact your
dealer or supplier for further information.
[Information on Disposal in other
Countries outside the European Union]
These symbols are only valid in the
European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for
the correct method of disposal.
Note for the battery symbol (bottom
two symbol examples):
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Directive for the chemical involved.
To dispose or transfer this unit
The unit may keep the user settings information in the unit.
If you discard this unit either by disposal or transfer, then
follow the procedure to return all the settings to the factory
presets to delete the user settings.
≥ The operation history may be recorded in the memory of
this unit.
Cd
(12)
DMP-BDT310_110EG-VQT3B62.book 12 ページ ２０１１年５月１８日 水曜日 午後１２時３分