DMP-BDT220_VQT3V20_eng.book 1 ページ 2011年12月5日 月曜日 午後5時35分 Owner’s Manual Blu-ray DiscTM Player Model No. DMP-BDT220 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. If you have any questions contact U.S.A.
DMP-BDT220_VQT3V20_eng.book 2 ページ 2011年12月5日 月曜日 午後5時35分 Getting started THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions.
DMP-BDT220_VQT3V20_eng.book 3 ページ 2011年12月5日 月曜日 午後5時35分 Unit ≥ This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ≥ Do not place sources of naked flames, such as lighted candles, on this unit. Placement To reduce the risk of fire, electric shock or product damage, ≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined space.
DMP-BDT220_VQT3V20_eng.book 4 ページ 2011年12月5日 Accessories Remote control (N2QAYB000719) Batteries for remote control 2 1 午後5時35分 Unit and media care Check the supplied accessories before using this unit. 1 月曜日 AC power supply cord (K2CB2CB00022) ∫ Clean this unit with a soft, dry cloth ≥ Never use alcohol, paint thinner or benzine to clean this unit. ≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.
DMP-BDT220_VQT3V20_eng.
DMP-BDT220_VQT3V20_eng.book 6 ページ 2011年12月5日 ∫ Discs that cannot be played in this unit Any other disc that is not specifically supported or previously described. ≥ DVD-RAM ≥ Super Audio CD ≥ Photo CD ≥ DVD-Audio ≥ Video CD and Super Video CD ≥ WMA discs ≥ All types of DivX discs ≥ PAL discs ≥ HD DVD ≥ BD-Video discs recorded at a rate of 50 fields/sec ∫ Region management information BD-Video This unit can play BD-Video discs supporting the region code “A”.
DMP-BDT220_VQT3V20_eng.book 7 ページ 2011年12月5日 月曜日 午後5時35分 1 2 9 1 10 2 11 12 13 3 3 14 15 4 5 6 7 8 4 5 16 17 9 10 11 12 13 14 18 6 19 20 7 8 15 16 17 18 19 20 1 Turn the unit on and off TV operation buttons You can operate the Panasonic TV through the unit’s remote control. (Depending on the TV these buttons may not work.) [Í TV] : Turn the television on and off [AV] : Switch the input select [i j VOL] : Adjust the volume Select title numbers, etc.
DMP-BDT220_VQT3V20_eng.book 8 ページ 2011年12月5日 月曜日 午後5時35分 STEP 1 : Connecting to a TV Perform either one of the following connections in accordance with your TV input terminal. ≥ Before making any connections, we suggest to temporarily disconnect all the units from AC power. ≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly. ≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
DMP-BDT220_VQT3V20_eng.book 9 ページ 2011年12月5日 月曜日 午後5時35分 STEP 2 : Connecting to an amplifier/receiver Perform either one of the following connections in accordance with your amplifier/receiver input terminal. HDMI AV OUT HDMI IN HDMI OUT (ARC) HDMI IN (ARC) Amplifier/receiver ≥ Set “Digital Audio Output” (> 26). ≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV OUT, then connect the TV and the amplifier/receiver.
DMP-BDT220_VQT3V20_eng.book 10 ページ 2011年12月5日 月曜日 午後5時35分 STEP 3 : Connecting to the network The following services can be used when this unit is connected to broadband. ≥ Firmware can be updated (> 13) ≥ You can enjoy BD-Live (> 17) ≥ You can enjoy VIERA Connect (> 19) ≥ You can access other devices (Home Network) (> 20) ≥ This unit supports Wi-Fi DirectTM and can make a wireless connection to wireless devices without router. You can use this function when enjoying Home Network feature, etc.
2011年12月5日 STEP 5 : Settings Easy Setting After connecting your new player for the first time and pressing [Í], a screen for the basic settings will appear. 午後5時35分 Easy Network Setting After completing “Easy Setting”, you can perform “Easy Network Setting”. Wired connection Select “Wired” and press [OK]. Preparation Turn on the television and select the appropriate video input on the television. 1 月曜日 Easy Network Setting Select a connection mode. Current setting : Wired Press [Í].
DMP-BDT220_VQT3V20_eng.book 12 ページ 2011年12月5日 ∫ “Search for wireless network” The available wireless networks will be displayed. 1 Select your network name and press [OK]. ≥ If your network name is not displayed, search again by pressing the [R] button on the remote control. Stealth SSID will not be displayed, in this case enter manually. Wireless Settings Select a wireless network for connection.
2011年12月5日 Reprogramming the remote control If you have more than one Panasonic player/ recorder and the remote control operates both products at once, you will need to change the remote control code to prevent this occurrence. (> 30, “Remote Control Code”) 月曜日 午後5時35分 Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.
DMP-BDT220_VQT3V20_eng.book 14 ページ 2011年12月5日 Inserting or removing media Playback 月曜日 午後5時35分 HOME menu Major functions of this unit can be operated from the HOME menu. Preparation Turn on the television and select the appropriate video input on the television. 1 2 ≥ When inserting a media item, ensure that it is facing the right way up. ≥ When removing the SD card, press the center of the card and pull it straight out.
DMP-BDT220_VQT3V20_eng.book 15 ページ 2011年12月5日 月曜日 Multi User Mode Multi User Mode is a function that enables switching of multiple settings easily. Up to 4 people can use the unit with their own settings. Following settings can be personalized. ≥ The user icon ≥ The wallpaper of Home menu ≥ The audio and picture settings (> 22, 25) HOME A Network Photos Setup Music Personalize a background of the Home menu.
DMP-BDT220_VQT3V20_eng.book 16 ページ 2011年12月5日 Playback 1 Insert the media. Playback starts depending on the media. 2 Select the item to play and press [OK]. Repeat this procedure if necessary. ≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫STOP] when you have finished playback to protect the unit’s motor, your television screen and so on. ≥ MKV: Successive play is not possible.
2011年12月5日 Displaying menus and playback information Preparation Connect 3D compatible TV to an HDMI AV OUT terminal of this unit using a High Speed HDMI Cable. (> 8, 9) ≥ Perform the necessary preparations for the TV. Press [POP-UP MENU/TOP MENU]. ≥ Select the item and press [OK]. Show the status messages While playing, press [STATUS]. The status messages give you information about what is currently being played.
DMP-BDT220_VQT3V20_eng.book 18 ページ 2011年12月5日 Slideshow Play a slideshow of photos and make various settings during the playback. 1 2 3 Insert the media. Select “Photos”. Select an item and press [G]. The following items can be set. Start Slideshow Start the slideshow. You can display still pictures in the selected folder one by one at a constant interval. Display Interval Change the display interval. Transition Effect Select the effect when sliding pictures.
2011年12月5日 Enjoying Network Service (NETFLIX, etc.) You can access information services from the VIERA Connect Home screen via the Internet. VIERA Connect provides a variety of selected Internet services such as the following.
DMP-BDT220_VQT3V20_eng.book 20 ページ 2011年12月5日 Home Network feature Playing back contents on the DLNA server You can share photos, videos and music stored in the DLNA Certified media server (PC with Windows 7 installed, smartphone, etc.) connected to your home network, and enjoy the contents with this player. 月曜日 午後5時35分 Using the Digital Media Controller You can use the smartphone, etc. as the Digital Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit).
2011年12月5日 VIERA LinkTM “HDAVI ControlTM” What is VIERA Link “HDAVI Control”? VIERA LinkTM is a new name for EZ SyncTM. VIERA Link “HDAVI Control” is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or amplifier/receiver under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 1 Set “VIERA Link” to “On” (> 30).
DMP-BDT220_VQT3V20_eng.book 22 ページ 2011年12月5日 Option menu 月曜日 午後5時35分 Settings Operation Menu A variety of playback operations and settings can be performed from this menu. Available options differ depending on the playing contents and the condition of the unit. ∫ Soundtrack Show or change the soundtrack. About Multi User Mode ∫ Audio channel Select the audio channel number. : Settings of the items with this indication are saved by the respective users registered in the Home menu.
DMP-BDT220_VQT3V20_eng.book 23 ページ 2011年12月5日 ∫ Secondary Video Video Select on/off of images. The recording method of original video appears. ≥ During search/slow-motion or frame-by-frame, only the primary video is displayed. Soundtrack Select on/off of audio and the language. ∫ Control Panel Display the Control Panel. Playing back while using VIERA Link, etc. e.g., EXIT 月曜日 午後5時35分 Video Settings ∫ Picture Mode Select the picture quality mode during play.
DMP-BDT220_VQT3V20_eng.book 24 ページ 2011年12月5日 Audio Settings ∫ Sound Effects*1, *2 Select the sound effect. ≥ Night Surround : Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily. ≥ Re-master : This feature gives you brighter sound by increasing the high frequency portion of the audio.
DMP-BDT220_VQT3V20_eng.book 25 ページ 2011年12月5日 Setup menu Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby. Some items in the Setup menu are common to the Option menu. You can get the same effect by both menus. About Multi User Mode : Settings of the items with this indication are saved by the respective users registered in the Home menu. Please refer to page 15 for details about user registration and switching. Press [HOME].
DMP-BDT220_VQT3V20_eng.book 26 ページ 2011年12月5日 ∫ Still Mode (paused video) Select the type of picture shown when you pause playback. Auto Automatically selects the type of picture shown. Field Select if jittering occurs when “Auto” is selected. Frame Select if small text or fine patterns cannot be seen clearly when “Auto” is selected. ∫ Seamless Play The chapter segments in playlists are played seamlessly. ≥ Select “On”, when the picture freezes for a moment at the chapters segment in playlists.
DMP-BDT220_VQT3V20_eng.book 27 ページ 2011年12月5日 3D 月曜日 午後5時35分 Language ∫ 3D BD-Video Playback ∫ Audio Language Select the playback method of 3D compatible video software. Choose the language for audio. ∫ 3D AVCHD Output Select the output method of 3D AVCHD videos. ∫ 3D Type Select the format of the connected TV. ≥ Change the settings for 3D on the TV also when “Checker board” or “Side by side” is selected.
DMP-BDT220_VQT3V20_eng.book 28 ページ 2011年12月5日 Network ∫ Easy Network Setting (> 11) ∫ Network Settings Perform network-related settings individually. Press [OK] to show the following settings: ¾LAN Connection Mode Select the LAN connection method. ≥ Select “Wireless Master” when you make a direct wireless connection between this unit and a Home Network device. Internet connection is not available when this item is selected.
2011年12月5日 Registration Type Auto Allow connection to all the equipment that is accessing this unit. Manual Set the permission of the connection individually for the equipment that is accessing this unit. Remote Device List Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected. ¾ BD-Live Internet Access (> 17) You can restrict Internet access when BD-Live functions are used.
DMP-BDT220_VQT3V20_eng.book 30 ページ 2011年12月5日 ¾VIERA Link Set to use “HDAVI Control” function when connected via HDMI cable to a device that supports “HDAVI Control”. ≥ Select “Off” when you do not want to use “HDAVI Control”. ∫ Unit Settings Press [OK] to show the following settings: ¾Front Panel Display Changes the brightness of the unit’s display. ≥ If “Auto” is selected, the display is set to bright and only dimmed during playback.
DMP-BDT220_VQT3V20_eng.book 31 ページ 2011年12月5日 Troubleshooting guide 月曜日 午後5時35分 Reference Other support information: “Customer Services Directory (United States and Puerto Rico)” (> 41) or “Limited Warranty (Only for CANADA)” (> 42). The following do not indicate a problem with this unit: – Regular disc rotating sounds. – Image disturbance during search. – Image disturbance when replacing 3D discs. ∫ Unit doesn’t respond to remote control or front panel buttons.
DMP-BDT220_VQT3V20_eng.book 32 ページ 2011年12月5日 This unit does not recognize the USB connection correctly. ¾ Disconnect and reconnect the USB cable. If it still does not recognize the connection, turn the power of this unit off and on again. ¾ If you connect USB HDD to this unit, use USB extension cable that is supplied with the HDD. Picture The images from this unit do not appear on the television. Picture is distorted. ¾ An incorrect resolution is selected in “HDMI Resolution”.
2011年12月5日 Audio Cannot switch audio. ¾ When connecting an amplifier/receiver using an OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio Output” is set to “Bitstream”. Set “Digital Audio Output” to “PCM”. (> 26) Cannot hear the desired audio type. ¾ Check the connections and the “Digital Audio Output” settings. (> 9, 26) ¾ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (> 26) Playback Disc cannot be played.
DMP-BDT220_VQT3V20_eng.book 34 ページ 2011年12月5日 Messages The following messages or service numbers appear on the television or unit’s display. On the television Cannot play. ¾ You inserted an incompatible disc (Discs recorded in PAL video, etc.). Cannot display on this unit. ¾ You tried to play a non-compatible image. ¾ Confirm “SD” on the unit’s display is not displayed and re-insert the card. No disc inserted. ¾ The disc may be upside down. $ This operation is not available.
DMP-BDT220_VQT3V20_eng.book 35 ページ 2011年12月5日 月曜日 午後5時35分 U59 ¾ The unit is hot. The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears. Select a position with good ventilation when installing the unit. Hor F (“ ” stands for a number.) ¾ There is something unusual. ¾ Check the unit using the troubleshooting guide. If the service number remains displayed, do the following.
DMP-BDT220_VQT3V20_eng.
DMP-BDT220_VQT3V20_eng.book 37 ページ 2011年12月5日 Specifications Signal system NTSC Operating temperature range i5 oC to i35 oC (i41 oF to i95 oF) Operating humidity range 10 % to 80 % RH (no condensation) Video output Output level: 1.
DMP-BDT220_VQT3V20_eng.book 38 ページ 2011年12月5日 Audio information The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. (> 26, Digital Audio Output) ≥ The number of channels listed is the maximum possible number of output channels when connected to amplifier/ receiver compatible with the respective audio format. “Digital Audio Output” Terminal “Bitstream” “PCM” HDMI AV Outputs using OUT original audio*1 BD-Video : 7.
DMP-BDT220_VQT3V20_eng.book 39 ページ 2011年12月5日 月曜日 午後5時35分 “AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony Corporation. Java is a registered trademark of Oracle and/or its affiliates. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S.
DMP-BDT220_VQT3V20_eng.book 40 ページ 2011年12月5日 月曜日 午後5時35分 This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2 (GPL v2), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.
DMP-BDT220_VQT3V20_eng.book 41 ページ 2011年12月5日 月曜日 午後5時35分 Limited Warranty (ONLY FOR U.S.A.
DMP-BDT220_VQT3V20_eng.book 42 ページ 2011年12月5日 月曜日 午後5時35分 Limited Warranty (Only for CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc.
DMP-BDT220_VQT3V20_eng.book 43 ページ 2011年12月5日 Referencia rápida en español 午後5時35分 Reproducción básica (Spanish Quick Reference) Preparación Encienda el televisor y seleccione la entrada de vídeo adecuada en el televisor. Conexiones básicas Conexión a un televisor compatible con HDMI Cable HDMI 月曜日 1 Pulse [Í] para encender la unidad. Después de conectar su nuevo reprodutor y pulsar el botón de encendido, aparecerá la pantalla de la configuración básica. HDMI IN 2 Inserte el medio.
DMP-BDT220_VQT3V20_eng.book 44 ページ 2011年12月5日 月曜日 午後5時35分 Index A Audio Changing audio . . . . . .16 Language . . . . . . . .27, 36 B BD-Live . . . . . . . . . . . . . .17 D DLNA . . . . . . . . . . . . . . . .20 F File format. . . . . . . . . . . .37 Firmware update . . . . . . . 13 L LAN . . . . . . . . . . . . . . . . .10 Language Audio . . . . . . . . . . . . . .27 Menu . . . . . . . . . . . . . .27 On-screen. . . . . . . . . . .27 Soundtrack . . . . . . . . . .22 Subtitle . . . . . . . . . .