Operation Manual

Getting started
VQT4G51
23
7 Set “Power Save” to “On”, “On Timer” or
“Off”, then press [OK].
8 Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 96)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
• Select “Yes” to proceed to “Easy Network
Setting”. (> 24)
• Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup
1 Press [FUNCTION MENU]. (> 21)
2 Select “Setup” in “Others”, then press [OK].
3 Select “Auto Setup” in “DVB Tuning”, then
press [OK]. (> 89)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 27)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
•On
§
It will go into the Power Save in Standby
mode.
•On Timer
§
Set the start and stop time and then press
[OK].
• “Power Save in Standby” is activated
when the set time comes.
•Off
It is possible to start quickly from standby
mode. (Quick Start mode)
• If you use Home Network function (> 99),
select “Off”. This function is not available
with other settings.
§
“Unit’s Display” is fixed to “Automatic” in
the Setup menu. (> 95)
Video from AV2 input cannot be viewed
with this unit in standby mode.
Power Save in Standby
From To
Power Save
On
0 6
DMR-BCT820_720_721EG_eng.book 23 ページ ２０１２年８月１日 水曜日 午後５時１８分