Operation Manual

Getting started
SQT0807
22
Settings
The tuner in this unit is compatible with digital
Cable broadcast services and digital terrestrial
broadcast services.
• In these operating instructions,
[DVB-C] : indicates features applicable to digital
cable broadcasts (DVB-C).
[DVB-T] : indicates features applicable to digital
terrestrial broadcasts (DVB-T).
• This unit can receive only one of the two
services at a time.
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
3 Select language, then press [OK].
4 Select country, then press [OK].
5 Select “Digital Cable (DVB-C) Channels” or
“Digital Terrestrial (DVB-T) Channels”, then
press [OK].
8 Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
9 Select the item to match the type of TV
connected. (> 93, TV Aspect)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
To stop partway
Press [RETURN ].
To restart setup or change TV signal type
(> 86, Auto Setup)
To confirm that channels have been tuned
correctly (> 29, Using Channel List)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
[BCT855] [BCT850] [BCT755] [BCT750]
Easy Setting
2 Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
1 [DVB-C]
Select the channel number allocation,
then press [OK].
• For Germany and Austria:
Normally set to “Preset Channel
Number”.
• For Switzerland:
Normally set to “Operator’s Channel
Number ( LCN )”.
• To change channel allocation, restart Auto Setup
in Basic Settings menu and change channel
number allocation selection. (> 86)
• If channel is not found, restart Auto Setup in Basic
Settings menu. (> 86)
2 [DVB-C]
Select “Start Auto Setup”, then press
[OK].
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
•Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
6 Auto Setup will start automatically.
(This operation may take some time.)
[DVB-C]
When tuning is completed, press [OK].
7 Clock will be set automatically.
If the clock setting screen appears, set the
time manually (> 97, Clock).
DMR-BST_BCT855EG_eng.book 22 ページ ２０１５年６月４日 木曜日 午後２時５８分