Operation Manual

Recording
SQT0807
36
Timer recording
1 On the TV Guide screen:
[BCT855] [BCT850] [BST855] [B ST850]
Press [OPTION].
[BCT755] [BCT750] [BST755] [B ST750]
Press the blue button.
2 Select the item, then press [OK].
Keyword Search
Displays programmes including the input
keyword.
• Refer to “Entering text”. (> 103)
Prog.Type Search
Displays programmes of the selected type.
• Select the programme type, then press [OK].
Category Selection
Displays programmes in the selected
category.
• To return to the previous TV Guide list
Select “All DVB Channels”.
3 Select the programme, then press the red
button for timer recording.
• Category may not be assigned correctly depending on the
programme information.
• “Keyword Search”, “Prog.Type Search” and “Category
Selection” search the First 250 channels on “All DVB
Channels”.
The recording’s start and stop times can be
controlled by the broadcaster, e.g. delayed start.
• To use this function, set “Signal Supported
Recording” to “ON”. (> 37)
• The Signal Supported Recording function may
not work if you manually change the start time or
the stop time over 10 minutes.
• If the signal is not sent correctly, the recording may lack the
beginning or the ending part of the programmes.
To search the programmes
To use Signal Supported Recording
If “Overlapped Timer Recording” screen
appears
To resolve an Overlapped Timer Recording
1 Select “Change”, then press [OK].
2 Follow the on-screen instructions.
Red: Delete programme
Yellow: Exit (Overlapping is not resolved)
Timer programme overlaps with others.
Some part or all of programmes may not be recorded completely.
Overlapped Timer Recording
Keep Change
Please delete unnecessary programme to resolve.
OK
RETURN
Overlapped Timer Recording
New Programme
ConfirmDelete
WED 11.10 TWO Wales
Existing Programmes
WED 11.10 Holiday
WED 11.10 Animals
9:00 - 9:45
9:20 - 9:55
9:00 - 9:30
DMR-BST_BCT855EG_eng.book 36 ページ ２０１５年６月４日 木曜日 午後２時５８分