Operation Manual

Convenient functions
SQT0807
96
Basic Settings
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select “Yes”, then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select “Yes”, then press [OK].
• This function cannot be enabled when
“Automatic” is selected in “Registration type for
remote devices”. (> above)
• The maximum number of equipment that can be
registered is 16.
[BCT855] [BCT850] [ BST8 55] [BST850]
DVB-via-IP Server Function
DVB-via-IP Server
Turn on/off the DVB-via-IP Server
function.
• If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (> right)
Network Function Priority
It is not possible to use the DVB-via-IP
Server function and another network
function (Network Service / Home
Network) simultaneously.
Priority can be given to either of these
functions. (> 76)
Others
Standby Settings
Quick Start
•On:
It is possible to start quickly from standby
mode.
• Off:
Power consumption in standby mode is
minimised. (> 112)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
“Quick Start” is activated when the set time
comes.
• When “Home Network function” (> 95), “TV
Anywhere” (> 95) or “DVB-via-IP Server” (> left) is set
to “On”, the setting for this function is fixed to “On”.
• If “Off” or “Timer Setting for Quick Start” is selected, the
setting for “Front Panel Display” in “Display” is fixed to
“Automatic”. (
> 92)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When “REWIND LIVE TV” is set to “On”
(> 89), “Off” cannot be selected.
Automatic Standby after OTR
•On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing “Automatic Stop” or
“Recording Time” (> 31).
DMR-BST_BCT855EG_eng.book 96 ページ ２０１５年６月４日 木曜日 午後２時５８分