Operating instructions

With Other Equipment
VQT2J65
64
Recording from external equipment
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP
≥Connect the Set Top Box (> 9).
1 While stopped
Press [INPUT SELECT] to select the
input channel.
2 Press [REC MODE] to select the
recording mode.
3 Select the channel on the other
equipment.
4 Press [¥ REC].
Recording starts.
5 Set the time to record. (> 21)
To skip unwanted parts
Press [;] to pause recording.
≥Press again to restart recording.
To stop recording
Press [∫].

≥ It will be recorded in standard definition quality even if the
programme is in high definition quality.
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP
≥Connect the equipment with AV2 input terminal
(> 9).
≥Set “AV2 Input” and “Ext Link” (> 83).
≥Make timer programming on the external
equipment.
1 Press [EXT LINK].
≥“EXT-L” lights on the unit’s display
To cancel the External link
1 Turn on this unit.
2 Press [EXT LINK] to stop recording or to cancel
linked timer recording standby. (“EXT-L”
disappears.)

≥ It will be recorded in standard definition quality even if the
programme is in high definition.
≥ During Ext Link Standby mode or recording, you cannot
select external input other than AV2.
≥ This function does not work when “TV System” is set to
“NTSC” (> 82).
≥ This function does not work while recording
2 programmes simultaneously with timer recording.
≥ The beginnings of recordings may not be recorded
correctly in some cases.
≥ Programmes are recorded as one title on this unit when
the end time of the earlier timer recording and the start
time of the later timer recording are close to each other.
To divide the titles, go to “Divide Title” (> 41).
≥ When “EXT-L” lights on the unit’s display, Direct TV
Recording is unavailable.
Recording broadcasts from Set
Top Box
Linked timer recording (SKY
Digital STB, etc.)–EXT LINK
DMRBW880&780EB-VQT2J65_eng.book 64 ページ ２０１０年４月８日 木曜日 午後３時５９分