Operating instructions

Reference
VQT3C13
120
Specifications
Specifications are subject to change without
notice.
∫ General
Dimensions (WkHkD):
[BWT800] 430 mmk66 mmk238 mm
[BWT700] 430 mmk59 mmk238 mm
(excluding the projecting parts)
[BWT800] 430 mmk66 mmk249 mm
[BWT700] 430 mmk59 mmk249 mm
(including the projecting parts)
Mass: [BWT800] Approx. 3.2 kg
[BWT700] Approx. 3.1 kg
Power supply: AC 220 to 240 V, 50 Hz
Power consumption: [BWT800] Approx. 36 W
[BWT700] Approx. 34 W
“Power Save in Standby” is activated and “RF
OUT ( Aerial Signal )” is set to “Off”
Approx. 0.2 W
“Power Save in Standby” is not activated
Approx. 6.0 W
Operating temperature: 5 oC to 40 oC
Operating humidity range: 10 % to 80 % RH
(no condensation)
∫ TV system
Tuner System: DVB-T, T2
Country: UK
Channel Coverage: UHF 21~68
RF converter output: Not provided
∫ Video
Video system: PAL/NTSC
Recording system: MPEG2 (Hybrid VBR)
MPEG-4 AVC/H.264
Video in (PAL/NTSC): AV1/AV2 (21 pin)
1Vp-p(75≠)
S-Video in (PAL/NTSC):
AV2 (21 pin) 1 Vp-p (75 ≠)
RGB in (PAL) [BWT800]:
AV2 (21 pin) 0.7 Vp-p (75 ≠)
Video out (PAL/NTSC): AV1/AV2 (21 pin),
Video Out (pin jack) 1 Vp-p (75 ≠)
S-Video out (PAL/NTSC):
AV1 (21 pin) 1 Vp-p (75 ≠)
RGB out (PAL):
AV1 (21 pin) 0.7 Vp-p (75 ≠)
∫ Audio
Recording system:
Dolby Digital (2ch) (XP, SP, LP, EP mode)
Dolby Digital (Max 5.1ch)
(DR, HG, HX, HE, HL, HM mode)
Dolby Digital Plus (Max 5.1ch) (DR mode)
MPEG (2ch) (DR mode)
HE-AAC (5.
1ch (DVB-T/T2)) (DR mode)
Audio in: AV1/AV2 (21 pin)
Input level: Standard: 0.5 Vrms,
Full scale: 2.0 Vrms at 1 kHz
Input impedance: More than 10 k≠
Audio out: AV1/AV2 (21 pin),
Audio Out L/R (pin jack)
Output level: Standard: 0.5 Vrms,
Full scale: 2.0 Vrms at 1 kHz
Output impedance: Less than 1 k≠
Digital audio out:
Optical terminal
(PCM, Dolby Digital, DTS, MPEG)
Coaxial terminal
(PCM, Dolby Digital, DTS, MPEG)
HDMI terminal
(PCM, Dolby Digital, DTS, MPEG,
Dolby Digital Plus, Dolby TrueHD,
DTS-HD Master Audio,
DTS-HD High Resolution Audio)
∫ HDMI Output
[BWT800] 19 pin type A: 2 pcs
[BWT700] 19 pin type A: 1 pcs
≥This unit supports “HDAVI Control 5” function.
∫ Other terminals
USB Port Type A: 2 pcs
SD Card Slot 1 pc
LAN (Ethernet) Port 10BASE-T/100BASE-TX
∫ Internal HDD capacity
[BWT800] 500 GB
[BWT700] 320 GB
∫ WLAN [BWT800]
Antenna: Tx 1, Rx 2
Standard compliance:
IEEE802.11n/EEE802.11a/
IEEE802.11g/IEEE802.11b
Transmission system: MISO-OFDM system/
OFDM system/DSSS system
Frequency Range:
IEEE802.11n / IEEE802.11a
5.15 GHz-5.35 GHz, 5.47 GHz-5.725 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n
2.4 GHz-2.4835 GHz
Transfer rate (standard)
§1
:
IEEE802.11n Tx Max 150 Mbps/
Rx Max 300 Mbps
IEEE802.11g / IEEE802.11a Max 54 Mbps
IEEE802.11b Max11 Mbps
Access mode: Infrastructure mode
Security
§2
: WPA2-PSK (TKIP/AES)/
WPA-PSK (TKIP/AES)/
WEP (64 bit/128 bit)
§1
Transfer rates are theoretical values; however,
actual communication rate will vary according
to communication environment or connected
equipment.
§2
This unit supports WPA and WPA2 encryption.
DMRBWT800&700EB-VQT3C13_eng.book 120 ページ ２０１１年３月２４日 木曜日 午後２時４４分