Manual

Before requesting servtce, make the below checks• If you are in doubt about some of the check points, or if the remedies indicaled in the chad do
not solve the problem:
In the U.S.A., contact the Panasonic Customer Carl Center at 1-800-211-7262, or e-mail [e-mail], or
web site (http:/iwww.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, web site (www. panasonic.ca), or an authorized
SerWcentre closest to you.
Reference pages are shown as black circled numbers (_).
Possible solutions are indicated with " " on the relative pages in the operating instructions•
Power
Nopower.
The unit is on but cannot be
operated•
elnserrtheACpowetsuppycordsecurely ntoth#hou_ehodAOou_et (B,:: : _ -.. =:.:-'
• The unit is hot ("U14" appears on the display). (_
Wait for "U14" to disappear.
eerie of the unit's safety devices may have activated•
Reset the unit as follows:
1 Press [_/I, POWER] on the main unit to switch the unit to standby.
If the unit doesn't switch to standby, press and hold [_)/I, POWER] for about 10 seconds. The
unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply cord, wait one minute, thee reconnect it.
2. Press [(b/I, POWER] to turn the unit on.
Press [_] ,P_tAfE_-to _':the _n t:oe _........ _,:: _ _ _ _ • __- _. ;: ) -_ : ;:
Picture
!
oJ
The images from this unit do not
appear on the television.
Television reception worsens:
after connecting th e Unit., :
Screen size is wrong.
The picture flickers, :
On-screen messages do not
appear.
The blue background does not
appear:
Sound
No sound.
Low volume.
Distorted sound•
Cannot hear the desired audio
type.
Cannot switch audio during
stereo or M'[S broadcasts
=Make sure the television's input setting (e.g., VIDEO 1) is correct
'-This c_n' oec_r becausp.the Signals are being_di_ 6et_,_6tt th_ _,it _d_the _evi_i6r_i_
.> t can besolved, by u_sng a..e g_ _bOostek- av_ _[f_:.trom au_ etv_sual su__p_'_rs_ _%_'._
Co_su t yoqr dea er if_reception'_e;es not improve _" "_ , _'_;;,_:_ _: ;'_:_'_ :;_,::%_2-,:._¢ 5",- :
• Check the settings on your television•
• Check the settings for "TV Aspect", "4:3 TV Settings for DVD-Video" or "4:3 TV Settings for
DVD*RAM" in the TV Screen ACTION menus• (_, _)
CAd ust the teJey!F_or_S v_rtical _hoid. Read the _elevts!oz_s_PperatiBg Ibst ru_O_s :or c;on_[_!_o _.,_;:
eGo to Display in the ACTION menus and select "Automatic" for "Status Messages" _)
oPress [STATUS] to show the on-screen messages constantly _)
eGo tO Display in the ACTION menus and select "On'! for :'Blue Background": 1_ i
• Check the connections (_), _)
Check the input mode on the amplifier if you have connected one
eTurn V SS off if it causes distortion 1_
• Press [AUDIO] on the remote control to select the desired audio type. _)
=Go to Audio in the ACTION menus and choose the Corr_ setting with "MTS selection foi;DVD_R
Disc". 1_)
• Yeu have used digital connection Cor/necl lo other equipment using audio cabJes (analog
connection) _) _)
-YeLl cannot change the b;tJd_Otype when LJ£1!lgDVD-R