Manual

• TIME SMF

TIME !

DVD

TiME SLIP

TiMESLIP

You can play the program being recorded to check that it is being

recorded correctly. You can also check parts that were recorded

previously•

Preparation

Switch IDVD, TV] to "DVD".

While recording or timer recording

Press [TIME SLIP].

Play starts from 30 seconds previous.

The play images are shown for 5 seconds as a picture-in-picture

with the recording images, then they are shown in full.

• To continue to show both the recording and play

images

Press and hold [TIME SLIP] for about 3 seconds.

• To change the part being played I_1 ._

(_ Turn [TIME SLIP] on the main unit.

oTurn down to increase in one-minute units. O_

eTurn up to decrease in one-minute units. 1_

_) Press [TIME SLIP] on the main unit within 5 seconds to enter the

time• ==

Play starts from the time you entered.

You cannot change the position being played with the remote

control.

• To stop play and recording

O Press [11,STOP]. Play stops.

Wait 2 seconds.

Q Press Ill, STOP]. Recording stops.

oYou cannot stop recording with [11, STOP] during timer recording.

To stop timer recording, press [_), POWER], then [11, STOP] with-

in 5 seconds.

For your reference

oil you fast-forward, rewind, or skip during Time Slip, only the play

images are shown.

oThe sound tor the images being played is heard during Time Slip.

oThe length of the recording determines the amount of time you can

select for time slip. As the recording progresses, the amount of

time you can time slip also increases.