Manual

DVD

Numbered

buttons

By changing the remote control code, you can operate other DVD

recorders and players manufactured by Panasonic.

Most of the DVD recorders and players manufactured by Panasonic

use the same system for their remote controls, so if you operate

them in the same place, the controls can be confused by the differ-

ent pieces of equipment. Use the following procedure to change the

remote control code to solve this problem.

oUse "1", the factory sel code, under normal circumstances.

Be sure to set the same remote control code on the main unit as you

did for the remote control itself (m page 82, ACTION--Set Up_

Remote Control Code).

Preparation

eSwitch [DVD, TV] to "DVD".

oChange the code on the main unit.

Press [(_, POWER] and the numbered but-

tons corresponding to the code you want

to set, [1], [2], or [3], at the same time.

(1)POWER

• The following display appears on the unit's display if its code and

the remote control's code are different. Change the remote con-

trors code to suit the unit.

The unit's remote control code

oThe display disappears after about 5 seconds.

I..

ROTfi035