Manual

Do not use irregularly shaped discs, such as head-shaped.
(These can damage the unit.)
® ®
• How to hold a disc
DO not touch the recorded surface.
GO
• If there is dirt or condensation on the disc
Moisture may condense on discs after they are brought inside from
the cold.
DVD-RAM and DVD-R
Clean and dry only with the DVD-RAM/PD disc cleaner available as
an optional accessory, part number LF-K200DCAI. Do not use
cleaners or cloths for CDs to clean DVD-RAM and DVD-R.
DVD-Video, Video CD, CD
Wipe with a damp cloth and then wipe dry.
• Handling precautions
eDo not write on the Jabel side with a ball-point pen or other writing
instrument.
oDe not use cleaning sprays, benzine, thinner, static electricity pre-
vention liquids or any other solvent.
eDo not attach labels or stickers to discs. (Do not use discs with
exposed adhesive from tape or Jeff over peeled-off stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers available on the
market.
• Do not use discs that are badly warped or cracked. I
• Do not place or store discs in the following
places
oLocations exposed to direct sunlight
eHumid or dusty locations
eLocations directly exposed to a heat vent or heating appliance
The service numbers ("U" followed by two digits) and messages
shown in the table appear.
Reference pages are shown as black circled numbers
(_)" Service number
Possible solutions are indicated with" "on the relative peg-
es in the operating instructions.
Ull The disc is dirty or badly • Follow the instructions in "Disc handling" to clean the disc if it is dirty.
scratched, eThe disc cannot be played if it is scratched and this display doesn't disappear.
You have inserted a disc •Insert a disc the unit can play or record on. O
the unit cannot play or
record on.
U14 _ The unit is hol. •The unit switches to standby automatically for safety reasons and you cannot operate it.
lalm
Wait for about 30 minutes for the service number to disappear.
oSelect a position with good ventilation when installing the unit.
eDo not block the cooling fan on the rear of the unit.
U99 The unit fails to operate • Press [(_/F, POWER] to switch the unit to standby. Now press [(_/I, POWER] again to turn
properly, the unit on.
CHK The remote control and •Change the code on the remote control or main unit. (_, (_
REMOTE main unit are using
different codes.
,
_TR03S