User Guide

66
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
1·2·
3·4
/
Using on-screen menu icons (continued)
Marking places to play again— MARKER
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
Preparation
≥Switch [DVD, TV] to “DVD”.
≥Turn off the surround effects on the other equipment.
≥Press [DISPLAY] )[DISPLAY] to display the on-screen menu icons and use the joystick [1] to
highlight the marker icon (pages 62 and 64).
Marking Place
[RAM] [DVD-R]
You can mark up to 999 points on a disc to return to later. These marks are recorded directly
onto DVD-RAM, but are cleared when you removed or finalized DVD-R.
[DVD-V] [CD] [VCD]
You can mark up to 5 points on a disc to return to later. All the markers are cleared when the disc
tray is opened.
1
Press [ENTER].
2
Use the joystick [2, 1] to select the next asterisk (¢).
3
Press [ENTER] at the point you want to mark.
To play from a marked position
Preparation
≥Switch [DVD, TV] to “DVD”.
≥Press [DISPLAY] )[DISPLAY] to display the on-screen menu icons and use the joystick [1] to
highlight the marker icon (pages 62 and 64)
1
Press [ENTER].
2
Use the joystick [2, 1] to select a marker number.
3
Press [ENTER].
[RAM] [DVD-R]
When selecting markers 11 and above
1
Use the joystick [2, 1] to highlight the marker pin icon.
2
Use the joystick [3, 4] to select “11– 20”.
≥The group of 10 increases each time you move the joystick [3].
3
Use the joystick [1] and press [ENTER].
4
Use the joystick [2, 1] to select a marker number.
ªTo clear a marker
Use the joystick [2, 1] to select a marker number and press [CANCEL].
ªTo clear the on-screen icons
Press [RETURN].
Note
[RAM]
≥This feature doesn’t work while using a play list.
≥The markers are ordered by time. This means that the marker numbers can change when you
add and erase markers.
≥You cannot mark and clear points if you have write-protected the disc, either with the write
protect tab (page 91) or with DISC INFORMATION (page 40).
[DVD-R]
≥The markers are ordered by time. This means that the marker numbers can change when you
add and erase markers.
[DVD-V] [CD] [VCD]
≥This feature only works if the elapsed playing time of the disc is shown on the unit’s display.
≥Some subtitles recorded around the marker may fail to appear.
E-Text2.fm 66 ページ ２００１年１０月２２日 月曜日 午前８時４８分