User Guide

80
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE
CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
S TATU S
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP
SLOW/SEARCH
Á
2·3·4
1
/
5
Changing the units settings (continued)
Auto Clock Setting
If a TV station transmits a signal for time setting, performing the operation steps below activates
the Automatic time corection function and time is corrected automatically.
Preparation
Switch [DVD, TV] to DVD.
1
Press [SET UP].
The SET UP screen appears.
2
Use the joystick [2, 1] to select the Settings tab.
3
Use the joystick [3, 4] to select Clock and press [ENTER].
4
Use the joystick [3, 4] to select On of Automatic and press [ENTER].
Auto clock setting starts.
Under adverse reception conditions, etc., the automatic time correction function may not
work. In this case, the indication for Automatic is automatically reset to Off. If the
reception conditions improve later on, it may be possible to activate this function.
The following screen appears when setting is complete.
5
Press [RETURN].
Note
If Automatic is set to On when you open the Clock screen, do not set it to Off, otherwise,
the automatic time correcting function is deactivated.
In case of a power failure, an automatic back-up system automatically maintains the operation
of the clock for approximate 120 minutes.
When Automatic on the Clock setting menu is set to On, the automatic time correction
function checks and if necessary adjusts the time several times every day.
If Automatic is set to On and Power Save is On , the Automatic time correction function
does not work while the unit is turned off. However, as soon as it is turned on, the Automatic
time correction function is activated and the clock is set correctly.
ªTo stop auto clock setting
Press [RETURN].
E-Text2.fm 80 ページ 2001年10月22日 月曜日 午前8時48分