Manual

8
HDD, DVD record lamp
Disctray 5 3 4 6
L
1 2
bu_ons
You can insert a cartridge or non-cartridge disc.
[HDD][RAM] [DVO_RI
1 Press [(_, DVD POWER] to turn the
unit on.
2
3
Press [HDD] or [DVD] to select the
recording drive.
The HDD or DVD button lights up on the unit.
• It is not possible to record to both HDD (Hard Disk Drive)
and DVD drive simultaneously.
If you selected the DVD drive
Press [_ OPEN/CLOSE] to open the
tray and insert a disc (-_ left).
• Press the button again to close the tray.
• It is not possible to record continuously from one side of a
double sided disc to the other. You will need to eject the disc
and turn it over.
• If you put a disc in while the HDD is selected, the DVD but-
ton on the unit will flash while the unit reads the disc.
4 Ensure [DVD, TV] is switched to
"DVD" and press [^, v, CH] to select
the channel.
e,g,_
when you select
channel 4
5 Press [REC MODE] to select the
recording mode (-_ next page).
e,g,_
when you
select "XP"
• To record sound using LPCM (possible only in XP mode):
Select "LPCM" in "Audio Mode for XP Recording" (the pic-
ture quality may go down slightly). (-_page 45)
6 Press [Q, REC] to start recording.
The HDD or DVD record lamp on the main unit lights up.
Program information is.g., time and date) is registered in the
program list (-')page 19).
Non-cartridge disc
/
insert label.up with the arrow facing in,
[Note]
eLoad double-aided discs so the _abe} for the side you want to
record/play is facing up.
• When using 8 cm (3") DVD-RAM, remove the disc from the car-
tridge and insert it, making sure you align it with the groove.
To stop recording
Press [111],
To pause recording
Press [I I], Press again to continue recording.
(Program is not split into a separate program.)
Auto power-off
The unit switches to standby after about 6 boars in the stop mode.
You can turn this feature off or change the time to 2 hours
(")page 44, Set Up--Off Timer),
RQT6984