Manual

o
A, V, <1, I_
m
ENTER
FUNCTIONS --
STATUS --
v. CH
REC
[HDD][RAM] [DMITRI
Preparation
Connect a video cassette recorder to this unit's input terminals
(-'>page 52).
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
Select L1, L2 or L3.
• You can also select the inputchannel by pressing [^, v, CH].
2
8
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
Start play on the other equipment.
Press [O, REC] at the point you want
to start recording.
Recording starts.
To skip unwanted parts
Press [I I] to pause recording. (Press again to restart recording.)
To stop recording
Press [•].
[Note]
• When recording using L1, L2 or L3 terminals, only the sound
received at the time of recording will be recorded.
• if flexible recording (._ left) isused instead of steps 2 and 4, settings
can be made so that recording continues to the end of the video.
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
2
8
5
Press [A, V, CH] to select the channel.
While stopped
Press [FUNCTIONS].
Press [A, I!',<, I_] to
select "FLEXIBLE REC"
and then [ENTER].
Press [<1, I_] to
select "Hour" and
"Min" and press [&,
V] to set the record-
ing time.
Press [&, T, <1, I_] to select "Start"
and press [ENTER].
Recording starts.
[Note]
It may not be possible to record to the end of the program if the
remaining time doesn't allow,
For your reference
• Press [STATUS] during recording to show the remaining time.
• Recording time reduces if you repeatedly pause recording.
• The recording mode becomes FR.
RQT6984