Manual

=.
You can mark positions by pressing [MARKER]. Also use on-screen
menus to mark, recall, and clear positions.
[HDD][RAM] [DVI_R]
Mark up to 999 positions. The unit records the markers directly onto
the disc and they remain intact even if you remove the disc.
[DVD*A][DVI_V] IVCF}I[CD]IMP3]
Mark up to 5 positions. The markers clear when you open the disc
tray.
I Marking positions directly ]
During play
Press [MARKER]. _
One marker is added.
I Using on-screen menus to mark positions ]
During play
Press [DISPLAY].
The on-screen menus appear.
2
Press [&, V] to select "Play" and
press [1_].
e.g., DVD-RAM
4 Press [<1, I_] to select an asterisk (_<)
and press [ENTER].
One marker is added.
When marking positions 11 and above
[HDD][RAM][DVD-R]
0 Press [<1, I_] to highlight "1-10". _'_
_) Press [A, Y] to select "11-20".
You can select the next group of 10 when the current group is
full.
_) Press [1_].
The first asterisk is highlighted.
@ Press [ENTER] to mark a position.
To recall a marker
Press [4, _-] to select a marker number and press [ENTER].
• Play starts from the marked position.
To clear markers
Press [_1, _-] to select a marker number and press [CANCEL].
• An asterisk replaces the number and the position is cleared.
TO clear the on-scrsen menus
Press [RETURN].
[Note]
eYou cannot use this feature if:
=the disc's elapsed play time is not shown in the display.
=you are using a play list. [HDD][RAM]
=protection (cartridge .,,l.page 10, disc ,,,_page 36) is set (you
can still recall the markers to play a position). [RAM]
• Subtitles around markers may fail to appear.
• Markers are cleared when you finalize DVD-R (,,,_page 36).
eMarkers on HDD, DVD-RAM and DVD-R are ordered by time,
so marker numbers can change when you add and delete
them.
RQT6984
3
Press [&, T] to select "Marker" and
press [1_] to highlight the first aster-
isk (_<).
[HDD] [RAM] [DVI_R] [DVD-A] [DVI_V] IVD [CD] IMP3]