Manual
8
RQT6984
v(
Numbered
bu_ons
A, T, -<,1_
ENTER
REC
[HDD][RAM][DVD_R]
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
During recording
Press [0, REC] to select the recording time.
Each time you press the button: e,g.,
0:30 _ 1:00 _ 1:30 _ 2:00 _ 3:00
Counter (cancel) _ 4:00
For your reference
• Press [STATUS] to show the time remaining until recording finishes,
• This does not work during timer recordings or while using Flexible
Recording (-_page 16),
• Recording stops and the set time is cleared if you press [111].
• The set time is cleared if you change the recording mode or chan-
nel while recording is paused.
Preparation
• Ensure the clock (and guide channels for VCR Plus+ recording,
-_'page 8) are set correctly.
• Release protection (cartridge _page 10, disc _page 36) before
proceeding. [RAM]
Entering VCR Plus+ codes is an easy way of programming the unit
for recording. You can find these codes in newspapers and maga-
zines. You can enter up to 32 programs up to a month in advance.
1 Press
[VCR Plus+].
2
Press the numbered buttons to enter
the VCR Plus+ code.
Press [<] to move
back to correct a
digit,
3
Press [ENTER].
Confirm the program and make corrections if necessary using
[A, V, <, _].
• "invalid Entry" is displayed when you enter the wrong code.
Reenter the code.
• To select the recording drive
O Press [_1, I_] to select "DRIVE".
_) Press [.&, Y] to select "HDD" or "DVD".
• To change the recording mode
Press [REC MODE].
• To enter the title of the program
Press [_1, I_] to select "Enter Title" and press [ENTER]
(-')page 38).
The current
recording mode
(shown on the
unit's display) is
automatically
selected.
4
Displayed if the
recording can fit
remaining
space on the
HDD or disc.
Repeat steps 1-3 to program other recordings.
Press [RETURN].
The timer recording list disappears and the unit enters Timer
Recording standby mode ("(_)" appears on the unit display).
• The unit is not off. To save power, turn the unit off by press-
ing [_), DVD POWER].