Manual

Numbered
buttons _
I<l<, _lb{ m
A,V, 4,_
ENTER
IRN
[HDD][RAM]
Specify start and end points to create scenes, then specify the order
in which they are to be played. These scenes are not recorded sep-
acately so this doesn't use much capacity,
You can create a maximum of 99 play lists and 999 scenes on a
DVD-RAM and HDD.
Preparation
Release protection (cartridge _page 10, disc _page 36) before
proceeding.
While stopped
Press [PLAY LIST].
2 Press [A, V] to select"
press [ENTER].
.... 4--" and
3 Press [ENTER] at the start point.
HDD: The location of
the whole program's
start point
DMD-RAM: The loca-
tion of the whole
disc's start point
• Use [_14], [IP_-] and slow-motion (")page 20) to find the
start and end points.
• Pressing [ _ ], [ _ ] allows you to select other programs.
4 Press [ENTER] at the end point.
5
HOD:The location of
the whole program's
end point
DVD.RAM: The
location of the whole
disc's end point
To specify another scene
Select "Next" and press [ENTER], then repeat steps 3 and 4.
Press [A, V] to select "Exit" and
press [ENTER].
The play list screen appears.
To clear the play list screen
Press [PLAY LIST].
To stop partway through
Press [RETURN].
For your reference
• You cannot specify an end point before a start point.
• You may not be able to specify points within 3 seconds of each
other.
• Play pauses if the end of the last program on the disc is reached
during this procedure.
• Depending on the state of recording, the actual number of play
lists that can be recorded may be less than that specified in this
manual
RQT6984