Manual

STEP 2 The remote control
Opening the rear cover. Closing the rear coven
Press with your
II When the cover
comes off
• Insert so the poles (+ and -) match those in the remote control.
• Do not use rechargeable type batteries.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
[Note]
If you cannot operate the unit or television using the remote control
after changing the batteries, please re-enter the codes (television
_page 9, main unit _page 46).
Remote control signal sensor
2 o0
7 m (23 feet) directly in front of the unit
STEP 3 Plug-in Auto Tuning
_), DVD POWER.
Numbered
buttons
A,T,<,,
ENTER
POWER, _/I v,^,CH
After plugging the unit into your household AC outlet and pressing
[_), DVD POWER] to turn the unit on for the first time, the unit
assists you to set the menu language, and automatically tunes in all
the channels it can receive and sets the clock.
The unit automatically determines the type of transmission (air or
cable) and puts them into channels as follows.
TV Mode
(Air)
CATV Mode
(Cable)
VHF
UHF
VHF
CATV LOW BAND
CATV MID/SUPER BAND
CATV HYPER BAND
ULTRA BAND
SPECIAL CATV CHANNEL
2-13
14-69
2-13
95-99
14-36
37-65
66-94
100-125
1