2006年1月30日 月曜日 午後3時30分 Operating Instructions DVD Recorder DMR-EH75V Convenient functions Copying Editing Playing back Recording Model No. Getting started M6740P.book 1 ページ Dear Customer Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Region number supported by this unit Region numbers are allocated to DVD players and DVD-Video according to where they are sold.
M6740P.book 2 ページ 2006年1月30日 月曜日 午後3時30分 CAUTION! CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED.
M6740P.book 3 ページ 2006年1月30日 月曜日 午後3時30分 Getting started IMPORTANT SAFETY INSTRUCTIONS ........................................ 2 Table of contents ........................................................................... 3 ≥About descriptions in these operating instructions ........................ 4 HDD, disc and card information ................................................... 5 ≥HDD and discs you can use for recording and play ...................... 5 ≥Discs that cannot be played ..............
M6740P.book 4 ページ 2006年1月30日 月曜日 午後3時30分 Table of contents Copying Note about copying ......................................................................56 - Before copying...........................................................................57 Copying titles or playlists ............................................................59 ≥Copy Navigator ............................................................................59 ≥One Touch Copy ....................................................
M6740P.book 5 ページ 2006年1月30日 月曜日 午後3時30分 HDD and discs you can use for recording and play DVD-RAM ≥4.7 GB/9.4 GB, 12 cm (5z) ≥2.8 GB, 8 cm (3z) Hard disk drive (HDD) ≥80 GB Disc type Logo – Indicated in these instructions with [HDD] [RAM] DVD Video Recording format Recording format Data that can be recorded and played This is a recording method which allows you to record and edit television broadcasts and so on. ≥You can delete unwanted parts of a title, create playlists, etc.
M6740P.book 6 ページ 2006年1月30日 月曜日 午後3時30分 HDD, disc and card information HDD and discs you can use for recording and play (continued) rR ≥4.
2006年1月30日 月曜日 午後3時30分 Play-only discs [12 cm (5z)/8 cm (3z)] Disc type DVD-Video DVD-Audio DVD-RW (DVD Video Recording format) [DVD-V] [DVD-A] [-RW‹VR›] High fidelity music discs ≥Played on this unit in 2 channels DVD-RW¢ recorded on another DVD Recorder ≥You can play programs that allow “One time only recording” if they have been recorded to a CPRM compatible disc. ≥By formatting (l 71) the disc, you can record to it in DVD-Video format and play it on this unit.
M6740P.book 8 ページ 2006年1月30日 月曜日 午後3時30分 HDD, disc and card information Regarding DivX discs, MP3 discs and still pictures (JPEG, TIFF) DivX Playable discs [-R] [CD] File format DivX ≥Files must have the extension “.DIVX”, “.divx”, “.AVI” or “.avi”. Number of Maximum number of folders recognizable: 300 folders folders (including the root folder) Number of files Maximum number of DivX files recognizable¢1: 200 files Support DivX ver.3.11, 4.x, 5.
M6740P.book 9 ページ 2006年1月30日 月曜日 午後3時30分 Recording of MTS broadcasting [HDD] [RAM] Both Main and SAP audio can be recorded. You can change the audio during playback. (l 42, Changing audio during play) However in the following cases, select whether to record the Main or SAP audio: - Recording or copying sound in LPCM (l 76, Audio for XP Recording) - “Recording for High-Speed Copying” is set to “On” (The default setting is “On”.
M6740P.book 10 ページ 2006年1月30日 月曜日 午後3時30分 HDD (Hard disk drive) handling care The HDD is a high precision recording instrument and because of its long recording capability and high speed operation it is a very special device that is easily susceptible to damage. As a basic rule, save important content to a disc as backup.
M6740P.book 11 ページ 2006年1月30日 月曜日 午後3時30分 The precision parts in the unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke also can cause malfunction or breakdown. To clean the unit, wipe with a soft, dry cloth. ≥Never use alcohol, thinner or benzine to clean the unit. ≥Before using chemically treated cloth, carefully read the instructions that came with the cloth. Observe the following points to ensure continued listening and viewing pleasure.
M6740P.book 12 ページ 2006年1月30日 月曜日 午後3時30分 Inserting a disc [1] Press [<, OPEN/CLOSE] on the main unit to open the tray. ≥If you eject a disc and close the disc tray, the HDD drive is automatically selected. ≥You can insert a cartridge or non-cartridge disc. [2] Press [<, OPEN/CLOSE] on the main unit to close the tray. Note ≥A double-sided disc should be loaded with the side you want to record/play facing down.
M6740P.book 13 ページ 2006年1月30日 月曜日 午後3時30分 Please check and identify the supplied accessories. Use product numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of January 2006. These may be subject to change.) To order accessories, refer to “Accessory Purchases” on page 95. ∏ 1 AC power supply cord (VFA0461) ≥For use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.
M6740P.book 14 ページ 2006年1月30日 月曜日 午後3時30分 Control reference guide Remote control Instructions for operations are generally described using the remote control.
2006年1月30日 月曜日 午後3時30分 Control reference guide M6740P.book 15 ページ Main unit Pull open with your finger. Cassette eject button (<, EJECT) . . . . . . . . . . . . . . . . . l 12 Cassette compartment Channel select (CH, X, W) . . . . . . . . . . . . . . . . . . . . . . . l 29 Open/close disc tray (<, OPEN/CLOSE). . . . . . . . . . . . l 12 Select drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 14 ≥Drive changes each time you press [DRIVE SELECT]. (6) Stop (∫) . . . . . . .
M6740P.book 16 ページ 2006年1月30日 月曜日 午後3時30分 STEP 1 Connection This section includes diagrams of six common methods of connection ([A] to [F], l 16–18). Please connect using the one that best suits you. ≥Visit Panasonic’s homepage for more information about connection methods. (This is in English only.) http://www.panasonic.com/consumer_electronics/dvd_recorder/dvd_connection.asp ≥Before connection, turn off all equipment and read the appropriate operating instructions.
2006年1月30日 月曜日 午後3時30分 DirecTV/DISH Network service is only available in the United States. C Connection with a television and cable box or DirecTV receiver Cable from Satellite antenna wall or antenna signal (satellite receiver only) Television ≥If your television does not have AUDIO/VIDEO terminals (l 19, [d]). ≥If you enjoy higher picture quality.
M6740P.book 18 ページ 2006年1月30日 月曜日 午後3時30分 STEP 1 Connection Program listings for satellite services other than DirecTV cannot be received. Without this information, program-based recordings cannot be made. However, recordings can still be set manually. You can use the DISH Network TV Guide to make scheduled recordings on this unit. DirecTV/DISH Network service is only available in the United States.
2006年1月30日 月曜日 午後3時30分 If your television does not have AUDIO/VIDEO terminals, an RF modulator is necessary The circled numbers in the illustration refer to connection “[A]” to “[F]”. Also connect all other cables as well. a Connection with a television (l 16, [A]) 75 ≠ coaxial cable (included) 2 This unit RF modulator RF IN R-AUDIO-L VIDEO AUDIO R L IN3 DVD/VHS COMMON OUT PR S VIDEO R-AUDIO-L VIDEO S VIDEO S VIDEO R-AUDIO-L VIDEO IN1 S VIDEO STEP 1 Connection M6740P.
M6740P.book 20 ページ 2006年1月30日 月曜日 午後3時30分 STEP 1 Connection If the antenna connector doesn’t match Use one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75 ≠ coaxial cable to the antenna terminals on the equipment (television etc.). Refer to other equipment’s operating instructions. Type A twin lead This unit Other equipment (television etc.
2006年1月30日 月曜日 午後3時30分 To enjoy even higher picture quality Connecting to the S VIDEO IN terminal Connecting to the COMPONENT VIDEO IN terminals The S VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal. (Actual results depend on the television.
M6740P.book 22 ページ 2006年1月30日 月曜日 午後3時30分 STEP 1 Connection Connecting with an HDMI (High Definition Multimedia Interface) terminal HDMI is the next-generation interface for digital devices. When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Definition Television), the output can be switched to 1080i or 720p HD video.
M6740P.book 23 ページ 2006年1月30日 月曜日 午後3時30分 [2] Press [3, 4] to select the language and then press [ENTER]. ≥If you make a mistake, press [RETURN] to return to an earlier screen. Aspect Ratio Selection POWER Í/ l Select TV type and press ENTER.
M6740P.book 24 ページ 2006年1月30日 月曜日 午後3時30分 STEP 2 Setting up the TV Guide On Screen® system Refer to the control reference on page 23. Please perform setup by following all instructions that apply to your current service. DirecTV/DISH Network service is only available in the United States. Service Set the following ≥You cannot select both “Antenna” and “Cable without a Cable Box”. Antenna ≥Further setup is not necessary.
M6740P.book 25 ページ 2006年1月30日 月曜日 午後3時30分 [7] Confirm the settings. e.g., Refer to the control reference on page 23. If you are using a satellite service other than DirecTV, you cannot receive the program listings on this unit. [1] Press [Í, DVD/VHS POWER]. (The unit turns off, then wait 24 hours.) ZIP Code - 11111 (USA) Cable on "RF" “BYE” appears briefly. This shows the unit is in standby mode. The unit is now ready to download the program listings.
M6740P.book 26 ページ 2006年1月30日 月曜日 午後3時30分 STEP 4 Set up to match your television and the unit’s remote control Television operation DVD/VHS POWER You can operate the TV through the unit’s remote control. POWER VOLUME DRIVE CH SELECT TV/VIDEO TV operation buttons TRACKING/V-LOCK/PAGE 1 2 3 CH 4 5 6 VCR Plus+ 7 8 9 INPUT DELETE CANCEL 0 SELECT Numbered buttons e.g., 0250: [0] > [2] > [5] > [0] Manufacturer and Code No.
M6740P.book 27 ページ 2006年1月30日 月曜日 午後3時30分 Recording HDD and discs ∫ FR (Flexile Recording) The unit automatically selects a recording rate between XP and EP (8H) that will enable the recordings to fit in the remaining disc space with the best possible recording quality. ≥You can set FR (Flexible Recording) mode when copying (l 59, 60, 64) or programming scheduled recordings (l 36, To make scheduled recording) or Flexible recording (l 30).
M6740P.book 28 ページ 2006年1月30日 月曜日 午後3時30分 Note about recording ∫ Recording modes and approximate recording times Depending on the content being recorded, the recording times may become shorter than indicated. DVD-RAM Single-sided (4.7 GB) Double-sided¢1 (9.4 GB) DVD-R/DVD-RW/ +R/+RW (4.7 GB) DVD-R DL¢3 (8.5 GB) +R DL¢3 (8.
M6740P.book 29 ページ 2006年1月30日 月曜日 午後3時30分 [3] Press [REC MODE] to select the recording mode [HDD/discs (XP, SP, LP, or EP) / VHS (SP, EP or VP)].
M6740P.book 30 ページ 2006年1月30日 月曜日 午後3時30分 Recording television programs Flexible Recording mode (FR) DVD/VHS [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] The unit sets the best possible picture quality that fits the recording within the remaining disc space. The recording mode becomes FR mode. POWER POWER DRIVE SELECT DRIVE CH SELECT TV/VIDEO VOLUME TRACKING/V-LOCK/PAGE Preparation ≥Select the channel or the external input (IN1, IN2, IN3 or DV) to record.
2006年1月30日 月曜日 午後3時30分 Playing while you are recording [HDD] [RAM] ∫ Playing from the beginning of the title you are recording—Chasing playback While recording or scheduled recording Press [1, PLAY]. ≥There is no sound output while searching forward or backward. To stop play Press [∫, STOP]. Recording television programs M6740P.book 31 ページ To stop recording 2 seconds after play stops Press [∫, STOP].
M6740P.
2006年1月30日 月曜日 午後3時30分 ∫ Manually programming scheduled recordings [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] ≥You can manually set the date, channel, start and end times and so on for programs you want to record. [1] Press [SCHEDULE]. SETUP SCHEDULE LISTINGS ∫ Using VCR Plusi system to make scheduled recordings [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] Entering PlusCode® numbers is an easy way of scheduling recording. You can find them in TV listings in newspapers and magazines.
M6740P.book 34 ページ 2006年1月30日 月曜日 午後3時30分 Scheduled recording Refer to the control reference on page 32. Notes on scheduled recording Check, change or delete a program ≥“ ” flashes when the unit cannot go to scheduled recording standby. ≥Scheduled recordings begin when the set time is reached even when recording or when playing. ≥Scheduled recordings do not begin while copying in normal speed mode (l 58).
M6740P.book 35 ページ 2006年1月30日 月曜日 午後3時30分 Refer to the control reference on page 32. ∫ Screen Components (The screen displayed when [TV GUIDE] is pressed) Video window (The title highlighted is displayed.) Panel Ads (Panel menu) 8:08 Menu SCHEDULE LISTINGS SEARCH 8:00 8:30 Listings Options menu This appears when you press [SUB MENU].
M6740P.book 36 ページ 2006年1月30日 月曜日 午後3時30分 Utilizing the TV Guide On Screen® system Refer to the control reference on page 32. Using the LISTINGS Service to set scheduled recording and scheduled reminder When “LISTINGS” is selected in step 3 on page 35 LISTINGS screen is displayed. You can set scheduled recording and scheduled reminder. You can also view titles selected from the program listings.
2006年1月30日 月曜日 午後3時30分 Using the SEARCH Service to search TV programs by genre, keyword, etc. When “SEARCH” is selected in step 3 on page 35 SEARCH screen is displayed. The SEARCH service displays program listings sorted into your preferred categories. There are various categories, such as movies, sports, children’s, educational, news, variety, series, HDTV, keyword and alphabetically. Each category will contain individual minor categories.
M6740P.book 38 ページ 2006年1月30日 月曜日 午後3時30分 Utilizing the TV Guide On Screen® system Refer to the control reference on page 32. Using SETUP Service to change the settings of the TV Guide On Screen® system When “SETUP” is selected in step 3 on page 35 SETUP screen is displayed. The SETUP service allows you to redo the channel settings, customize the channel line-up and set the TV Guide On Screen® system’s start-up pattern.
2006年1月30日 月曜日 午後3時30分 General defaults Change the size of the Information box box size: box position: video: Change the position of the Information box The highlighted title is displayed in the Video window. The title in the Video window will be not change if you select “locked”. Change how channels are displayed (e.g., logo, number or both) Choose whether the TV GUIDE screen is displayed automatically or not when you turn on this unit.
M6740P.book 40 ページ 2006年1月30日 月曜日 午後3時30分 Playing back Playing recorded video contents/Playing play-only discs ∫ Selecting recorded programs (titles) to play–Direct Navigator DVD/VHS POWER POWER DRIVE CH SELECT TV/VIDEO DRIVE SELECT [HDD] [RAM] [-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] [+RW] [-RW‹VR›] VOLUME [1] Press [DIRECT NAVIGATOR].
2006年1月30日 月曜日 午後3時30分 ∫ When a menu screen appears on the television [DVD-V] [DVD-A] Press [3, 4, 2, 1] to select the item and then press [ENTER]. Some items can also be selected using the numbered buttons. [VCD] Press the numbered buttons to select the item. e.g., 5: [0] )[5] 15: [1] )[5] ≥To return to the menu screen [DVD-V] Press [DIRECT NAVIGATOR] or [SUB MENU]. [DVD-A] Press [DIRECT NAVIGATOR]. [VCD] Press [RETURN]. ≥Depending on the type of disc, playback methods will differ.
M6740P.book 42 ページ 2006年1月30日 月曜日 午後3時30分 Playing recorded video contents/Playing play-only discs Refer to the control reference on page 40. Skipping the specified time (Time Slip) [1] Press [TIME SLIP]. [2] Press [3, 4] to select the time and then press [ENTER]. -5 min Play skips the specified time. ≥Each time you press [3, 4], the time increases [3] or decreases [4] by 1 minute intervals. (Press and hold for 10-minute intervals.
M6740P.book 43 ページ 2006年1月30日 月曜日 午後3時30分 [4] Press [3, 4] to select playback mode and then press [ENTER]. DVD/VHS POWER If “DivX Menu” is selected: Go to “Playing DivX discs” step 2 in the below column. If “MP3 Music” is selected: Go to “Playing MP3 discs” step 2 on page 44. If “Pictures” is selected: Go to “Playing still pictures” step 3 or 4 on page 45.
M6740P.book 44 ページ 2006年1月30日 月曜日 午後3時30分 Playing DivX discs, MP3 discs and still pictures (JPEG/TIFF) ≥You can also select the track with the numbered buttons. e.g., 5: [0] > [0] > [5] 15: [0] > [1] > [5] Refer to the control reference on page 43. ∫ About DivX VOD content DivX Video-on-Demand (VOD) content is encrypted for copyright protection. In order to play DivX VOD content on this unit, you first need to register the unit.
2006年1月30日 月曜日 午後3時30分 [CD] Pictures Menu Picture View A CD (JPEG) Folder Video B Picture Picture View screen Useful functions during still picture play 100__DVD 001 002 003 004 005 006 007 008 009 --- --- --- Previous Page 01/02 Next Play (Go to step 4) Direct Navigator screen icons Picture protected. Picture in which the number of prints is set (DPOF) (l 55, 93). To show other pages Press [3, 4, 2, 1] to select “Previous” or “Next” and then press [ENTER].
M6740P.
M6740P.book 47 ページ 2006年1月30日 月曜日 午後3時30分 ∫ Video menu–Change the picture quality Picture [HDD] [RAM] [-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] [+RW] [DVD-V] [DVD-A] [-RW‹VR›] [VCD] To select the picture quality mode during play. ≥Normal: Default setting ≥Soft: Soft picture with fewer video artifacts ≥Fine: Details are sharper ≥Cinema: Mellows movies, enhances detail in dark scenes.
M6740P.book 48 ページ 2006年1月30日 月曜日 午後3時30分 Playing a video cassette [VHS] Preparation ≥Select the unit viewing channel (e.g. the AV input) on the TV. ≥Turn on this unit.
2006年1月30日 月曜日 午後3時30分 Adjusting the playback picture Changing audio While playing tapes ∫ Manual tracking Press [AUDIO]. The unit usually makes tracking adjustments, but you may need to do it manually if noise appears on a tape recorded on other equipment.
M6740P.book 50 ページ 2006年1月30日 月曜日 午後3時30分 Playing a video cassette Refer to the control reference on page 48. Various on-screen display indications On-screen display below appears during play on VHS. To see these displays, set “Status Messages” to “Automatic”. (l 76) Press [STATUS]. 1 2 VHS Mono L 3 4 0:00.22 1 SP 1 5 6 1 Current drive 2 Audio indicators The Left (Mono L) and Right (Mono R) indicators show which sound mode is selected as follows: Stereo: Stereo indicators appear.
M6740P.book 51 ページ 2006年1月30日 月曜日 午後3時30分 Editing Editing titles/chapters and playing chapters DVD/VHS POWER You can modify (remove unnecessary parts, divide, etc.) recorded programs. POWER DRIVE SELECT DRIVE SELECT TV/VIDEO CH VOLUME Preparation ≥Turn on the television and select the appropriate video input to suit the connection to this unit. ≥Turn the unit on. ≥Press [DRIVE SELECT] to select the drive (HDD or DVD) containing the recorded title to be edited. ≥[RAM] Release protection (l 70).
M6740P.book 52 ページ 2006年1月30日 月曜日 午後3時30分 Editing titles/chapters Refer to the control reference on page 51. Title operations After performing steps 1 to 5 (l 51) Delete Title¢ [HDD] [RAM] [-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] [+RW] Properties Press [2, 1] to select “Delete” and then press [ENTER]. ≥Once deleted, the recorded contents are lost and cannot be restored. Make certain before proceeding. ≥[-R] [-R[DL] [+R] [+R[DL] The available recording space does not increase when you delete titles.
M6740P.book 53 ページ 2006年1月30日 月曜日 午後3時30分 [4] Press [3, 4, 2, 1] to select “Create” and then press [ENTER].
M6740P.book 54 ページ 2006年1月30日 月曜日 午後3時30分 Creating, editing and playing playlists Refer to the control reference on page 53. Editing and playing playlists/chapters [HDD] [RAM] [-RW‹VR›] (Play only) [1] While stopped Press [FUNCTIONS]. [2] Press [3, 4] to select “Other Functions” and then press [ENTER]. [3] Press [3, 4] to select “Playlists” and then press [ENTER]. [4] Press [3, 4, 2, 1] to select the playlist. To start play l Press [ENTER]. To edit l Step 5.
M6740P.book 55 ページ 2006年1月30日 月曜日 午後3時30分 Refer to the control reference on page 53. [HDD] [RAM] [SD] ≥You can edit pictures and albums. ≥You can use SD Memory Cards with capacities from 8 MB to 2 GB (l 7). ≥You cannot edit still pictures recorded on CD-R/CD-RW. Preparation ≥Press [DRIVE SELECT] to select the drive (HDD, DVD or SD). ≥[RAM] [SD] Release protection (l 70, Setting the protection—Disc Protection). [1] Press [DIRECT NAVIGATOR]. [2] [HDD] [RAM] Press [B] to select “Picture”.
M6740P.book 56 ページ 2006年1月30日 月曜日 午後3時30分 Copying Note about copying See also the notes “Important notes for recording” (l 9). You can select from a variety of methods to copy on the unit. You cannot copy titles which have been treated to prevent copying.
2006年1月30日 月曜日 午後3時30分 ∫ Before copying When copying a title with main and secondary (SAP) audio ≥Select the audio type for recording MTS broadcasts from “Multi-channel TV Sound (MTS)” (l 76) when: - Copying to a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW. - When “Audio for XP Recording” is set to “LPCM” (l 76) and you are copying in XP mode. Copying 16:9 aspect titles The titles are copied in 4:3 aspect if you copy to a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW.
M6740P.book 58 ページ 2006年1月30日 月曜日 午後3時30分 Note about copying ∫ Depending on the copy type, copy direction and copy speed, the following restriction are applied to the settings and operations while copying.
M6740P.book 59 ページ 2006年1月30日 月曜日 午後3時30分 [1] POWER POWER DRIVE CH SELECT TV/VIDEO While stopped Press [FUNCTIONS]. [2] Press [3, 4] to select “Copy” and then press [ENTER].
M6740P.book 60 ページ 2006年1月30日 月曜日 午後3時30分 Copying titles or playlists Refer to the control reference on page 59. Note ≥When copying is not started or not executed, the “COPYING” indicator blinks for about 7 seconds. Check if the unit is properly prepared. One Touch Copy ∫ Copy direction ∫ HDD l DVD or VHS ≥The HDD status messages are not shown while copying. (l 76) ≥Audio output is stereo (L R) during HDD playback.
2006年1月30日 月曜日 午後3時30分 ∫ VHS l HDD or DVD ∫ DVD l VHS ≥The VHS status messages are not shown while copying. (l 76) ≥The DVD status messages are not shown while copying. (l 76) ≥Audio output is stereo (L R) during DVD playback. While both VHS and HDD or DVD are stopped [1] Press and hold [2VHS] or [VHS1] on the main unit for about 3 seconds or more (until “START” on the unit’s display terminates flashing). ≥The “COPYING” indicator on the main unit lights. ≥Check if copy starts properly.
M6740P.book 62 ページ 2006年1月30日 月曜日 午後3時30分 Copying titles or playlists 4 Press [3, 4] to select “Recording Mode” and then press [ENTER]. 5 Press [3, 4] to select the mode and then press [ENTER]. 6 Press [2] to confirm. DVD/VHS POWER POWER DRIVE CH SELECT TV/VIDEO VOLUME [6] Register titles and playlists for copy. TRACKING/V-LOCK/PAGE ≥If you are going to copy a registered list without making any changes to it (l step 7). 1 Press [3, 4] to select “Create List” and then press [1].
2006年1月30日 月曜日 午後3時30分 To play the disc on other DVD players: [-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] Finalize the disc (l 72) [+RW] Create DVD Top Menu (l 72) ∫ To stop copying Press and hold [RETURN] for 3 seconds. When High-speed copying All titles that have completely copied at the point canceled are copied. When Normal Speed copying Copies until the point canceled.
M6740P.book 64 ページ 2006年1月30日 月曜日 午後3時30分 Copying titles or playlists After performing steps 1 to 5 (l 62, Copying using the copying list—Advanced Copy (Create List)) ≥“Content Type” is automatically set to “DVD-Video” or “VHS-Video” in step 5-2 ≥You cannot select items that cannot be set in “Recording Mode” in step 5-4. DVD/VHS POWER POWER DRIVE CH SELECT TV/VIDEO VOLUME TRACKING/V-LOCK/PAGE Numbered buttons RESET STOP ≥If you are not going to change the setting (l step 7).
2006年1月30日 月曜日 午後3時30分 [8] Press [2, 1] to select “Yes” and then press [ENTER] to start copying. [VHS] > [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] When the confirmation screen appears ([VHS] > [-R] [-RW‹V›] [+R] only) Press [2, 1] to select “Copy Copying starts. and finalize” or “Copy only” Note: After copying, the disc should be finalized for playback on compatible DVD players. and press [ENTER].
M6740P.book 66 ページ 2006年1月30日 月曜日 午後3時30分 Copying still pictures [5] Set the recording mode. ≥If you are not going to change the recording mode, press [4] (l step 6). 1 Press [3, 4] to select “Mode” and then press [1]. 2 Press [3, 4] to select “Content Type” and then press [ENTER]. 3 Press [3, 4] to select “Picture” and then press [ENTER]. “Recording Mode” is automatically set to “High Speed”. 4 Press [2] to confirm.
2006年1月30日 月曜日 午後3時30分 To stop copying Press and hold [RETURN] for 3 seconds. Copying all the still pictures on a card— Copy all Pictures To return to the previous screen Press [RETURN]. [SD] > [HDD] [RAM] To show other pages Press [3, 4, 2, 1] to select “Previous” or “Next” and then press [ENTER]. ≥You can also press [:, SKIP] or [9, SKIP] to show other pages. Multiple editing Select with [3, 4, 2, 1] and then press [;, PAUSE]. (Repeat) Press [ENTER] to register to the list. ≥A check mark appears.
M6740P.book 68 ページ 2006年1月30日 月曜日 午後3時30分 Recording from a video cassette recorder Note ≥If it becomes time for a scheduled recording to start while copying, the recording will start and the copying will stop.
2006年1月30日 月曜日 午後3時30分 DV camcorder recording (DV Camcorder Rec.) [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] When the “DV Camcorder Rec.” function is used, programs are recorded as a title. At the same time chapters are created at each break in the images and the playlist is created automatically. Preparation 1 Turn off the main unit and DV equipment, then connect the DV equipment with the unit’s DV input terminal (l 68). 2 Turn on the main unit and then press [REC MODE] to select the recording mode.
M6740P.book 70 ページ 2006年1月30日 月曜日 午後3時30分 Convenient functions HDD, disc and card management Setting the protection—Disc Protection DVD/VHS POWER [RAM] POWER DRIVE CH SELECT TV/VIDEO Preparation ≥Press [DRIVE SELECT] to select the DVD drive.
2006年1月30日 月曜日 午後3時30分 Deleting all titles and playlists—Delete All Titles [HDD] [RAM] Preparation ≥Press [DRIVE SELECT] to select the drive (HDD or DVD). ≥Release protection (l 70). After performing steps 1 to 3 (l 70) [4] Press [3, 4] to select “Delete All Titles” and then press [ENTER]. [5] Press [2, 1] to select “Yes” and then press [ENTER]. [6] Press [2, 1] to select “Start” and then press [ENTER]. A message appears when finished. [7] Press [ENTER].
M6740P.book 72 ページ 2006年1月30日 月曜日 午後3時30分 HDD, disc and card management Refer to the control reference on page 70. Selecting the background style—Top Menu style [-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] [+RW] You can select the background that will be displayed as the DVD-Video top menu after finalizing. After performing steps 1 to 3 (l 70) [4] Press [3, 4] to select “Top Menu Style” and then press [ENTER]. [5] Press [3, 4, 2, 1] to select the background and then press [ENTER].
M6740P.book 73 ページ 2006年1月30日 月曜日 午後3時30分 [2] Press [3, 4, 2, 1] to select a character and then press [ENTER]. DVD/VHS POWER Repeat this step to enter other characters. POWER ≥To erase a character Press [3, 4, 2, 1] to select the character in the name field and then press [;, PAUSE]. (The selected characters are erased.
M6740P.book 74 ページ 2006年1月30日 月曜日 午後3時30分 Changing the unit’s settings Common procedures DVD/VHS POWER [1] POWER Í DRIVE CH SELECT TV/VIDEO TRACKING/V-LOCK/PAGE ¢ 1 2 3 CH 4 5 6 VCR Plus+ 7 8 9 INPUT DELETE CANCEL 0 SELECT RESET Tabs REW PAUSE TIME SLIP/ JET REW Setup FF PLAY Channel Setup Channel Disc SCHEDULE ENTER SUB MENU AUDIO A REC TIONS FU N C DIRECT NAVIGATO R TV GUIDE 3,4,2,1 ENTER Menus Options SLOW/SEARCH SKIP/INDEX STOP While stopped Press [FUNCTIONS].
2006年1月30日 Tabs Disc 月曜日 午後3時30分 Menus Options (Underlined items are the factory presets.) Settings for Playback Press [ENTER] to show the following settings. Ratings Set a ratings level to limit DVD-Video play. ≥8 No Limit: ≥1 to 7: All DVD-Video can be played. Prohibits play of DVD-Video with corresponding ratings recorded on them. Prohibits play of all DVD-Video. Follow the on-screen instructions. Enter a 4-digit password with the numbered buttons when the password ≥0 Lock All: screen is shown.
M6740P.book 76 ページ 2006年1月30日 月曜日 午後3時30分 Changing the unit’s settings Tabs Audio Menus Options (Underlined items are the factory presets.) Dynamic Range Compression [DVD-V] (Dolby Digital only) Change the dynamic range for late night viewing. ≥On ≥Off Multi-channel TV Sound (MTS) Select whether to record the main or secondary (SAP) audio type when: ≥Recording to a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW. ≥When “Recording for High-Speed Copying” is set to “On”.
2006年1月30日 Tabs TV Screen 月曜日 午後3時30分 Menus TV Type (l 26) Set to match the type of television connected. Options (Underlined items are the factory presets.) 4:3 TV ≥Aspect 4:3 & 480i ≥Aspect 4:3 & 480p 16:9 Aspect (Widescreen TV) ≥Aspect 16:9 & 480i ≥Aspect 16:9 & 480p Functions of HDMI Press [ENTER] to show the following settings. HDMI Video Output ≥On: ≥Off: When video output from COMPONENT VIDEO OUT terminal. HDMI Resolution You can only select items compatible with the connected equipment.
M6740P.book 78 ページ 2006年1月30日 月曜日 午後3時30分 Changing the unit’s settings ∫ Changing the speaker setting to suit your speaker When connecting with an HDMI cable to an amplifier, use the following settings on this unit if you cannot set the speaker delay effect on the amplifier. Center B A A Front (L) L Complete ms 0.0 A Front (R) R C Complete SW A Subwoofer LS A ms 0.
M6740P.book 79 ページ 2006年1月30日 月曜日 午後3時30分 Refer to the control reference on page 74. Preparation: If the program listings has already been downloaded, return the unit to the factory preset condition using the steps indicated below. When the unit is on and stopped 1 Press and hold [CH, X] and [CH, W] on the main unit for about 5 seconds. The unit turns off. 2 Press [Í, DVD/VHS POWER] to turn the unit on.
M6740P.book 80 ページ 2006年1月30日 月曜日 午後3時30分 Channel/Clock settings when TV Guide On Screen® system is not used Refer to the control reference on page 74. Channel captions After performing steps 1 to 4 (l left) You can use the preset captions, or manually enter new ones yourself. The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen. [1] While stopped Press [FUNCTIONS]. [2] Press [3, 4] to select “Other Functions” and then press [ENTER].
M6740P.book 81 ページ 2006年1月30日 月曜日 午後3時30分 Reference Refer to the following items if you have any doubts about unit operations. Set up What equipment is necessary to play multi channel surround sound? Page ≥You cannot playback multi-channel sound on this unit without other equipment. You must connect this unit with a HDMI cable or an optical digital cable to an amplifier with a built-in (Dolby Digital or DTS) decoder. ≥An amplifier supporting CPPM and the HDMI standard version 1.
M6740P.book 82 ページ 2006年1月30日 月曜日 午後3時30分 Frequently asked questions TV Guide On Screen® system 82 RQT8346 Page Does the TV Guide On ScreenR system work with analog and digital cable boxes/satellite receivers? ≥Yes. The TV Guide On ScreenR system works with both analog and digital cable boxes. ≥If you are using a satellite service other than DirecTV, you cannot use the TV Guide On ScreenR system. — — I have relocated, changed my television reception system or cable box etc.
M6740P.book 83 ページ 2006年1月30日 月曜日 午後3時30分 Messages including the following passages are displayed on screen. On the television Authorization Error This unit is not authorized to play this titles. Cannot finish recording completely. Cannot play. Cannot record on the disc. Unable to format. Cannot display on this unit. Cannot record. Disc is full. Cannot record. The number of titles has exceeded the maximum limit. No disc No folders. No SD Card No valid SD card.
M6740P.book 84 ページ 2006年1月30日 月曜日 午後3時30分 Messages On the unit’s display The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use. ≥If there is no change after turning the unit on and off, consult the dealer where the unit was HARD ERR¢ purchased. ≥Should you connect equipment that does not support CPPM the audio from the CPPM copy No AUDIO¢ protected DVD-Audio cannot be output from HDMI AV OUT terminal.
M6740P.book 85 ページ 2006年1月30日 月曜日 午後3時30分 Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 95. The following do not indicate a problem with this unit: ≥Regular disc rotating sounds. ≥Poor reception due to atmospheric conditions. ≥Image disturbance during search.
M6740P.book 86 ページ 2006年1月30日 月曜日 午後3時30分 Troubleshooting guide TV screen and video The images from this unit do not ≥Make sure that the television is connected to the VIDEO OUT terminal, S VIDEO OUT appear on the television. terminal, COMPONENT VIDEO OUT terminals or HDMI AV OUT terminal on this unit. ≥Make sure that the television’s input setting (e.g., VIDEO 1) is correct. Picture is distorted. ≥Progressive output is set to on but the connected television is not progressive compatible.
2006年1月30日 Sound No sound. Low volume. Distorted sound. Cannot hear the desired audio type. Cannot switch audio. 月曜日 午後3時30分 ≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the 16–21, 76 amplifier if you have connected one. ≥Press [AUDIO] to select the audio. 30, 42 ≥Turn off V. Surround Sound in the following cases. 47 - When using discs that do not have surround sound effects such as Karaoke discs. - When playing MTS broadcast programs.
M6740P.book 88 ページ 2006年1月30日 月曜日 午後3時30分 Troubleshooting guide Recording/Scheduled recording/Copying Cannot record. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the 5–7 unit can record onto. Cannot copy. ≥The disc is unformatted. Format the disc using DVD Management. [RAM] [-RW‹V›] [+RW] [+R] 71 [+R[DL] ≥The write-protect tab on the cartridge is set to PROTECT, or the disc is protected with DVD 70 Management.
2006年1月30日 TV Guide On Screen® system Although initial setup for the TV Guide On Screen® system was completed hours ago, program listings does not display when [TV GUIDE] is pressed. 月曜日 午後3時30分 ≥Leave the unit turned off for at least 24 hours. ≥Initial setup was done incorrectly. (e.g, The user entered the wrong country, ZIP/postal code or cable box information.) Select “Change system settings” menu and verify the data entered during initial setup.
M6740P.book 90 ページ 2006年1月30日 月曜日 午後3時30分 Troubleshooting guide TV Guide On Screen® system (Continued) Two stations are received on ≥Such situations occur more frequently on cable TV. “Split” channels occur when the cable certain channels; morning and provider may not have an adequate number of open channels and chooses to switch the evening programs differ. channel line to better suit the subscribers’ viewing habits. When a “Split” channel occurs, program data for only one channel is usually provided.
2006年1月30日 Edit Cannot edit. 月曜日 午後3時30分 ≥If there is not enough disc space on the HDD, you cannot edit on the HDD. Delete some unnecessary titles to create some disc space. Page 10 Cannot format. ≥The disc is dirty. Wipe with a damp cloth and then wipe dry. ≥[-R] [-R[DL] [CD] You tried formatting a disc that you may not be able to use in this unit. Cannot create chapters. ≥The unit writes the chapter division information to the disc when you turn it off or remove the disc.
M6740P.book 92 ページ 2006年1月30日 月曜日 午後3時30分 Specifications Recordable discs: DVD-RAM:Ver. 2.0 Ver. 2.1/3X–SPEED DVD-RAM Revision 1.0 Ver. 2.2/5X–SPEED DVD-RAM Revision 2.0 DVD-R: for General Ver. 2.0 for General Ver. 2.0/4X–SPEED DVD-R Revision 1.0 for General Ver. 2.x/8X–SPEED DVD-R Revision 3.0 for General Ver. 2.x/16X–SPEED DVD-R Revision 6.0 for DL Ver. 3.0 for DL Ver. 3.x/4X–SPEED DVD-R for DL Revision 1.0 DVD-RW: Ver. 1.1 Ver. 1.1/2X–SPEED DVD-RW Revision 1.0 Ver. 1.2/4X–SPEED DVD-RW Revision 2.
M6740P.book 93 ページ 2006年1月30日 月曜日 午後3時30分 Bitstream This is the digital form of multi-channel audio data (e.g., 5.1 channel) before it is decoded into its various channels. CPPM (Content Protection for Prerecorded Media) A copy protection system used for DVD-Audio files. This unit supports CPPM. CPRM (Content Protection for Recordable Media) CPRM is technology used to protect broadcasts that are allowed to be recorded only once.
M6740P.book 94 ページ 2006年1月30日 月曜日 午後3時30分 Glossary MPEG2 (Moving Picture Experts Group) A standard for efficiently compressing and expanding color video. MPEG2 is a compression standard used for DVD and satellite based digital broadcasting. This unit records programs using MPEG2. MPEG2 moving picture files shot with a Panasonic SD multi-camera, etc. can be copied to the HDD or a DVD-RAM disc.
M6740P.book 95 ページ 2006年1月30日 月曜日 午後3時30分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.
M6740P.book 96 ページ 2006年1月30日 月曜日 午後3時30分 Index Advanced Copy Create List ........................................62 Time Limit .........................................64 Angle ...................................................46 Audio Attribute ............................................46 Language .........................................46 Playback ...........................................42 Receiving, recording .........................30 VHS ..................................................
M6740P.book 97 ページ 2006年1月30日 月曜日 午後3時30分 Guía de referencia rápida en español (Spanish Quick Reference) ≥Para más información sobre los métodos de conexión, vea la página de inicio de Panasonic. (Sólo está en inglés.) http://www.panasonic.com/consumer_electronics/dvd_recorder/dvd_connection.asp ≥Antes de hacer la conexión, apague todos los equipos y lea los manuales de instrucciones apropiados. Cuando usa un servicio de cable o un servicio de satélite.
M6740P.
2006年1月30日 月曜日 午後3時30分 Inserción de un disco Nota acerca de la grabación [1] Pulse [<, OPEN/CLOSE] en la unidad principal para abrir la bandeja. ≥Puede insertar un disco con o sin cartucho. [2] Pulse [<, OPEN/CLOSE] en la unidad principal para cerrar la bandeja. Disco sin cartucho Disco con cartucho (1) ∫ Modos de grabación y tiempos aproximados de grabación para la HDD y los discos Dependiendo del contenido que está siendo grabado, los tiempos de grabación pueden ser inferiores a los indicados.
M6740P.book 100 ページ 2006年1月30日 月曜日 午後3時30分 Grabación de programas de televisión Consulte la referencia de los controles en la page 98. [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] [VHS] Puede grabar hasta: ≥[HDD] 500 títulos en la HDD. (Cuando la grabación continúa durante mucho tiempo, los títulos se dividen cada 8 horas.) ≥[RAM] [-R] [-RW‹V›] 99 títulos en un disco ≥[+R] [+RW] 49 títulos en un disco Preparación ≥Encienda el televisor y seleccione la entrada de vídeo apropiada a las conexiones de esta unidad.
M6740P.book 101 ページ 2006年1月30日 月曜日 午後3時30分 Consulte la referencia de los controles en la page 98. Reproducción de vídeo grabado/ Reproducción de discos de sola reproducción Preparación ≥Encienda el televisor y seleccione la entrada de vídeo apropiada a las conexiones de esta unidad. ≥Encienda esta unidad. [1] Pulse [DRIVE SELECT] para seleccionar la unidad de reproducción (HDD o DVD). Búsqueda Pulse [6, SLOW/SEARCH] o [5, SLOW/ SEARCH]. La velocidad aumenta hasta 5 pasos.
M6740P.book 102 ページ 2006年1月30日 月曜日 午後3時30分 Reproducción Consulte la referencia de los controles en la page 98. Reproducción de imágenes fijas [HDD] [RAM] [SD] [CD] ≥Puede reproducir imágenes fijas grabadas en un CD-R/CD-RW en un ordenador. ≥No puede reproducir imágenes fijas mientras graba o copia. ≥Introducción y extracción de la tarjeta SD (l 99) Mientras está parada, inserte la tarjeta en su ranura y automáticamente se visualiza el menú (l abajo).
2006年1月30日 月曜日 午後3時30分 ∫ Operaciones Parada Pulse [∫, STOP]. Pausa Pulse [;, PAUSE]. Pulse de nuevo [;, PAUSE] o [1, PLAY] para reiniciar la reproducción. Avance rápido/ Rebobinado Durante la parada Pulse [6] (atrás)/[5] (avance). Localización progresiva/ Revisión Durante la reproducción Teclee o mantenga pulsado [6] (atrás)/[5] (avance). ≥Si mantiene pulsado estos botones, al soltarlos la normal reproducción reinicia. ≥Teclee [1, PLAY] para reiniciar la normal reproducción.
M6740P.book 104 ページ 2006年1月30日 月曜日 午後3時30分 In the United States, TV Guide, G-LINK, VCR Plusr and PlusCode are registered marks of Gemstar-TV Guide International, Inc. and/or one of its affiliates. The TV Guide On Screen and VCR Plusr systems are manufactured under license from Gemstar-TV Guide International, Inc. and/or one of its affiliates.