DVD Recorder Model No. DMR-EZ37V P6 Basic Operations Operating Instructions The illustrations in these Operating Instructions show images of the silver model of this unit. Dear customer Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Region number supported by this unit Region numbers are allocated to DVD players and DVD-Video according to where they are sold. Example: The region number of this unit is “1”.
Precautions CAUTION! Note to CATV system installer: THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where 2) Keep these instructions. they exit from the apparatus. 3) Heed all warnings.
Table of Contents, Accessories Getting Started Precautions.........................................................................................................................................................................................2 IMPORTANT SAFETY INSTRUCTIONS ............................................................................................................................................3 Unit Care .....................................................................................
Control Reference Guide ........................................................ 60 Remote Control ............................................................................ 60 FUNCTIONS Window .................................................................. 60 Main Unit ...................................................................................... 61 The Unit’s Display ........................................................................ 61 Disc Handling ....................................
Watching Television This DVD recorder has a tuner which allows it to directly receive and record analog and terrestrial digital channels. High Definition (HD) programming is “down-converted” and recorded in Standard Definition (SD). DVD/VHS POWER POWER Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit. DRIVE SELECT TV/VIDEO CH VOL TRACKING/V-LOCK DVD/VHS POWER to turn the unit on.
Playback DVD/VHS Playing Discs Refer to “Advanced Disc Playback” ( 19–20) for detail information on playback of discs. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] [CD] DVD/VHS POWER DRIVE SELECT to turn the unit on. to select the DVD drive. POWER POWER DRIVE SELECT TV/VIDEO CH VOL Basic Operations Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit.
Recording Television Programs Refer to “Important Notes for Recording” ( 13) and “Advanced Recording” ( 14 to 17) for detail information on recording. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] Digital broadcasts cannot be recorded to video tape. Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit. [RAM] If the disc is protected, release protection ( 36). [VHS] Ensure accidental erasure tab is intact.
Scheduled Recording Refer to “Advanced Scheduled Recording” ( 18) for detail information on scheduled recording. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] Digital broadcasts cannot be recorded to video tape. DVD/VHS POWER POWER Schedule List Remaining Recording Time No Channel DRIVE SELECT TV/VIDEO CH VOL Basic Operations Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit.
Copying Copying (VHS DVD) Programs are automatically copied onto the disc from the location of playback at the time when the copying of the tape starts. [VHS] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit. [RAM] If the disc is protected, release protection ( 36). Insert a disc with enough space for recording. Select the DVD recording mode ( 14).
Copying (DVD VHS) All contents on the disc are automatically copied onto the tape. [RAM] [-R] [-R]DL] [-RW‹V›] [-RW‹VR›] [+R] [+R]DL] [+RW] [VHS] Finalized discs cannot be copied on this unit. On the main unit Press and hold for about 3 seconds. COPYING −Check if copying starts properly (“COPY” is displayed on this unit’s display). −Copying automatically stops when playback of the disc finishes or the tape reaches its end.
Deleting Recordings Important: Once deleted, contents cannot be recovered. Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit. [RAM] If the disc is protected, release protection ( 36). Insert a disc and press [ OPEN/CLOSE] again to close the tray.
Important Notes for Recording [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Select the Main or SAP audio before recording. You can change the audio during playback ( 20, Changing Audio during Playback). [ 42, Multi-channel TV Sound (Analog)] The selected audio only is recorded. Main SAP Hello Hola Main Hello If you record from external equipment Select both “Main” and “SAP” on the external equipment. If you record from external equipment Select “Main” or “SAP” on the external equipment.
Advanced Recording DVD Recording Modes and Durations DVD-RAM DVD-R DL3, +R DL3 (8.5 GB) Single-sided (4.7 GB) Double-sided1 (9.4 GB) DVD-R, DVD-RW, +R, +RW (4.
When the format confirmation screen is displayed Selecting Audio Channels to record When receiving an analog broadcast Important: Formatting permanently deletes all disc contents (including computer data), regardless of protection status of disc. [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Select the audio (Main or SAP) in “Multi-channel TV Sound (Analog)” in the Setup menu ( 42). [RAM] [RAM] [-RW‹V›] [+RW] AUDIO to select the audio. The following screen may appear when inserting a new disc, etc.
Advanced Recording Specifying the Recording Time Tips [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] Digital broadcasts cannot be recorded to video tape. This function allows specifying the length of recording time up to 4 hours. During recording To exit the screen Press [RETURN]. To stop recording partway Press [ STOP]. To show the remaining recording time Press [STATUS] to show the remaining recording time. DVD-RAM REC repeatedly until the desired time is reached.
Playing while you are recording You can play DVD or VHS while recording to the other drive. The recording will not be affected −DVD playback ( 7, 19, 20, 27) −VHS playback ( 7, 24 to 26) Notes During playing while you are recording, you cannot edit or delete recordings. Closed captions will not appear during simultaneous record and playback. Notes You cannot play a tape with the DVD PRIORITY output terminals while recording or making a scheduled recording on a disc ( 50).
Advanced Scheduled Recording To cancel a scheduled recording in progress DVD/VHS POWER –“” lights on the unit’s display. DRIVE SELECT to select the drive. STOP –Confirmation screen appears. to select “Stop recording”, then ENTER Notes Recording may fail if there are changes to the station’s programming. The password screen appears when setting parental ratings ( 44). Unless you enter the correct password, recording the program with parental ratings may fail.
Advanced Disc Playback Menu Screens on the TV Search [DVD-V] Generally, menu screens that appear on the TV may be navigated as follows: During playback or –There are 5 search speeds. Each press increases the search speed. –Press [ PLAY] to restart normal playback. , , , to select an item, then ENTER You can sometimes use the numbered buttons to select an item. Tips Tips Advanced Features Depending on the disc, search may not be possible.
Advanced Disc Playback Slow-motion Play [RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] While paused or CM Skip [RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] Skips 1-minute forward with each press. During playback CM SKIP –There are 5 slow-motion speeds. Each press increases the speed. –Press [ PLAY] to restart normal playback. Create Chapters Notes If continued for approx. 5 minutes, slow-motion play pauses automatically (except [DVD-V]).
Playing MP3s Playing MP3s , to select a group, then [CD] ENTER –The track list for the selected group appears. to select the DVD drive. Selected group Menu G 1 T 3 Total 3/111 No. 0 – 9 Track list is shown. Prev. Next No.
Playing Still Pictures (JPEG) Selecting Still Pictures in Another Folder Playing Still Pictures (JPEG) [CD] DRIVE SELECT From the Picture (JPEG) View screen to select the DVD drive. Picture (JPEG) View screen is shown.
Slide Show Zoom From the Picture (JPEG) View screen While playing a picture , , , to select “Folder”, then SUB MENU SUB MENU To zoom in: , to select “Start Slide Show” then ENTER , to select “Zoom In”, then ENTER Start Slide Show Slide Interval Rotate Right Rotate Left Zoom In Tips Advanced Features ENTER Notes To stop the Slide Show Press [ STOP]. To change the rate at which pictures are displayed 1 In step 2 above, press [, ] to select “Slide Interval”, then press [ENTER].
Advanced Video Cassette Playback Fast-forward/Rewind With the unit stopped FF to fast-forward the tape. Jet Search Allows high speed search of video in forward or reverse direction. During playback to rewind the tape. REW Slow playback FF twice to Jet Search forward. REW twice to Jet Search in reverse. –Press [ PLAY] to restart normal playback. During playback Notes PAUSE Press and hold for about 2 seconds. –Press [ PLAY] to restart normal playback.
The unit automatically records special index signals on a tape every time a recording is started (via [ REC], or a scheduled recording). The index search function makes use of these index signals to help you find the beginning of a desired program quickly and easily. While stopped or during normal play Adjusting the playback picture Manual Tracking The unit usually makes tracking adjustments automatically, but you may need to do it manually if noise appears on a tape recorded on other equipment.
Advanced Video Cassette Playback Changing Audio during Playback AUDIO repeatedly, to select the audio option. Stereo Mono L Mono R No display (Normal audio track) On-screen Display Indicators The following on-screen indicator will not be displayed when this unit is connected to the TV with the DVD PRIORITY output terminal. This indicator is only displayed when playing a tape in the VCR. The items displayed may differ depending on the operating conditions.
Playing Playlists Playing Playlists View Chapters [RAM] [-RW‹VR›] You cannot create or edit playlists on this unit. However, you can play a playlist that has been created or edited on other equipment. After selecting a playlist (step 5) SUB MENU DRIVE SELECT to select the DVD drive.
Recording from an External Device Recording to DVD Recording from a VCR, etc. Connect cables while the power to both the unit and the external device is off. Front on the unit [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Perform steps 1−5 left. Start play on the external device. REC IN 2 You can get a sharper, clearer picture by connecting with an S Video cable instead of the yellow video cable. S VIDEO VIDEO at the point you want to start recording to the disc.
Recording from a DV Camcorder Connect cables while the power to both the unit and the external device is off. Front on the unit to select “Record to DVD” then ENTER to select “Rec.” then ENTER 4-pin DV Cable [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Preparation: Turn on the unit. [RAM] If the disc is protected, release protection ( 36). Advanced Features Notes If the desired audio is not recorded, select the kind of audio for “Select Audio Channel For DV Input” in the Setup menu ( 42).
Entering Text Status Messages When viewing the Name screen. The following messages and displays appear to let you know what operations are being performed and the status of the unit. Recording Name _ Delete Set 1 1 2 3 5 6 7 2 A B C a b c 3 D E F d e f 4 G H I g h i 5 J K L j 6 M N O m k n o [ ] _ 7 P 8 T Q R S p q r s ( U V t u v { } ) - 9 W X 0 .
Recordings−Editing Tips Tips Recording/Chapter Normally, programs are recorded as a single item consisting of one chapter. Recording Chapter Start End To exit the menu screens Press [DIRECT NAVIGATOR]. To view other pages Press [, , , ] to select “Previous” or “Next” and press [ENTER]. –You can also press [, ] to view other pages. Multiple editing Select with [, , , ] and press [PAUSE]. (Repeat.) –A check mark appears. Press [PAUSE] again to cancel.
Recordings−Editing Setup Protection/Cancel Protection Tips Perform steps 1−4 of “Accessing the Recording View” ( 31). [RAM] Use to prevent accidental erasure of recordings. , to select “Setup Protection” or “Cancel Protection”, then ENTER to select “Yes”, then The lock symbol appears when the recording is protected. Divide Recording Perform steps 1−4 of “Accessing the Recording View” ( 31).
Chapters−Creating, Editing Accessing the Chapter View Chapter Operations [RAM] Allows viewing and editing chapters individually. DRIVE SELECT Create Chapter Perform steps 1−7b of “Accessing the Chapter View” ( left). to select the DVD drive. , to select “Create Chapter” then ENTER ] DIRECT NAVIGATOR Create Chapter DVD-RAM 08 Play Create Exit 0:43.21 ENTER at the point you want to divide. SUB MENU to display the menu list.
Setting DVD On-Screen Menus Accessing the DVD On-Screen Menus [DVD] When playing discs, disc settings can be displayed and changed. Menu options will differ based on disc type and contents. DRIVE SELECT to select the DVD drive. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] Soundtrack [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] The disc’s audio attributes appear ( below, Audio attributes).
Play Menu Audio Menu [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] [CD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] Repeat play V. Surround Sound (Dolby Digital with 2.0 or more channels only) This function works only when the elapsed play time is displayed. Select the item for repeat play. Depending on the disc, the items that can be selected will differ. Select “Off” to cancel.
DVD Management Accessing the Management Menus Preparation: [RAM] Release protection (disc, cartridge right). Insert a disc. DRIVE SELECT to select the DVD drive. Naming Discs [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Perform preparation steps 1−4 of “Accessing the Management Menus” ( left). , select “Disc Name”, then ENTER –You can give a name for the disc ( 30). With the unit stopped Tips The disc name is displayed in the DVD Management window.
Deleting All Recordings Formatting Discs Important: Once deleted, contents cannot be recovered. [RAM] Perform preparation steps 1−4 of “Accessing the Management Menus” ( 36). , select “Delete All Recordings” then ENTER , to select “Format Disc (DVD)” then ENTER ENTER to select “Start” then to select “Yes” then ENTER ENTER –A message appears when deleting is finished. ENTER [RAM[ [-RW‹V›] [+RW] [-RW‹VR›] Perform preparation steps 1−4 of “Accessing the Management Menus” ( 36).
DVD Management Selecting Whether to Show the Top Menu First [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Before finalizing a disc, select whether the top menu shows after finalizing. Perform preparation steps 1−4 of “Accessing the Management Menus” ( 36). , to select “Playback will start with:”, then ENTER , to select desired item, then ENTER DVD’s Top Menu: The Top Menu appears first. First Recording: The disc content is played without displaying the Top Menu.
Create DVD Top Menu [+RW] +RW discs contain no Top Menu Data. Top Menu is a convenient function. We recommend you create the menu before playing a +RW disc on other equipment. Perform preparation steps 1−4 of “Accessing the Management Menus” ( 36). , to select “Create DVD Top Menu”, then ENTER to select “Start”, then to select “Start”, then ENTER ENTER –“Create DVD Top Menu” cannot be canceled once started. –“Create DVD Top Menu” takes a few minutes. to complete.
Changing the Unit’s Settings Accessing the Setup menu Summary of Settings All factory default settings are indicated with “Underlined” text. With the unit stopped Channel Signal Source (Antenna / RF IN) Select to suit the type of antenna you are using.
Disc Video Settings for Playback Still Mode (paused video) Press [ENTER] to show the following settings. Select the type of picture shown when you pause play ( 82, “Frame and field”). [Automatic] [Field] Select if jittering occurs when “Automatic” is selected. [Frame] Select if you cannot see small text or fine patterns clearly when “Automatic” is selected. Ratings Set a ratings level to limit DVD-Video play. Follow the on-screen instructions.
Changing the Unit’s Settings Audio Display Dynamic Range Compression Status Messages [DVD-V] (Dolby Digital only) Change the dynamic range ( 82) for easier listening in low volume. [On] [Off] Choose whether to show status messages automatically or not. [Automatic] [Off] On-screen Language Multi-channel TV Sound (Analog) [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Select whether to record the main or secondary audio program (SAP) when recording to these discs.
VHS Language code list Select Tape Length Set the length of tape you are using so the unit can show the correct remaining time.
Changing the Unit’s Settings Setting the Parental Rating The V-chip system ( right, Notes) used in this unit allows you to limit viewing and recording of certain programs that may contain scenes unsuitable for children. If the unit starts receiving a broadcast with the set rating information, a password screen appears and you will be unable to view or record until you enter the password. You can view or record after entering your password. , to select the limitation.
Parental Rating List U.S. TV Rating (U.S. TV Programs Ratings) TV-NR TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA [Viewable] [Blocked] [Viewable] [Blocked] [FV Blocked] [Viewable] [Blocked] [Viewable] [Blocked] [--]: Viewable [X]: Blocked D, L, S, V (all selected) Any combination of D, L, S, V [--]: Viewable [X]: Blocked D, L, S, V (all selected) Any combination of D, L, S, V [--]: Viewable [X]: Blocked L, S, V (all selected) Any combination of L, S, V [FV]: Fantasy/Cartoon Violence Not Rated.
Changing the Unit’s Settings Setting the Closed Caption Choose whether to show closed captions. With the unit stopped , to select the item, then ENTER CC1–4: Information related to pictures (Appears at bottom of screen) T1–4: Textual information (Appears over entire screen) Settings for closed captions in digital broadcasts Perform steps 1–7 of “Setting the Closed Caption”. , to select “Other Functions” then ENTER , to select “Setup”, then ENTER , to select “Channel”, then .
Basic Connection Connecting to a Television with Direct Cable or Antenna (No Cable Box or Satellite Receiver) Note: The terminals on the rear of your TV may not appear as shown below. Please read terminal labels carefully to ensure correct connections.
Basic Connection Connecting to a Television and a Cable Box Consult your cable service provider about the appropriate cable box to use. Additional coaxial cable and audio/video (AV) cable are required. Note: The terminals on the rear of your TV and cable box may not appear as shown below. Please read terminal labels carefully to ensure correct connections.
Connecting to a Television and a Satellite Receiver Additional coaxial cable and audio/video (AV) cable are required. Note: The terminals on the rear of your TV and satellite receiver may not appear as shown below. Please read terminal labels carefully to ensure correct connections.
Connection Options for Improved Playback Quality You can enjoy high-quality picture by using the following terminals for connection. Standard Quality Picture Highquality Picture VIDEO IN S VIDEO IN COMPONENT terminal terminal VIDEO IN terminal DVD output and DVD/VHS output The unit has DVD/VHS COMMON output terminals and DVD PRIORITY output terminals. You can enjoy higher picture quality when connecting with DVD PRIORITY output terminals.
Using Component Video Cables for Better Video (Component Video Cables not included) The COMPONENT VIDEO OUT terminals on this unit can be used for either interlace or progressive output ( 82) to provide a purer picture than the S VIDEO OUT terminal.
Additional Connection Options You can enjoy better quality sound by changing the audio cable connection between this unit and your TV on page 47 to 49 as follows. Using an Audio Cable for Better Sound Use this connection to play sound through speakers connected to an amplifier or system component.
Setting the Channels and Clock Preparation: Turn on the television and select channel 3. These are the first settings you make upon buying the unit. You don’t need to make these settings again. DVD/VHS POWER POWER DRIVE SELECT TV/VIDEO CH VOL TRACKING/V-LOCK to turn the unit on. TRACKING/V-LOCK to select an RF output channel number 3. CH When the picture on the TV is poor, switch the TV to channel 4. Also change this unit’s display to “CH 4”.
Setting the Channels and Clock Manual Clock Setting The types of transmission: , to select “Antenna” or Automatic Clock and Channel Settings “Cable”, then ENTER Please select the wire connected to RF IN. Antenna Perform steps 1–6 on page 53. , to select the item you want to change. Cable Set Clock Manually Month ENTER 1 Day / 1 / Year Hour 2000 SAT 12 ENTER to start automatic channel/ clock setting.
Other Settings Setting Channel Captions The captions you select or modify are used as channel names and displayed on the Direct Navigator screen. To select the caption: , to select the caption. –After selecting the “Channel” column with [, ], repeat steps 6–7a to set other channels. With the unit stopped To modify the caption: 1. ENTER , to select “Other Functions”, then ENTER , to select “Channel Settings”, then ENTER , to select channel, then , to select the “Caption” column.
Other Settings Selecting Television Type Notes This setting allows you to select the type of television connected. With the unit stopped , to select “Other Functions”, then ENTER Aspect 4:3/16:9 4:3 16:9 4:3 standard aspect television 16:9 widescreen television 480p/480i Select “480p” if the television is compatible with progressive output. Select “480i” if the television is not compatible with progressive output or you are unsure about television compatibility.
With the unit stopped Notes This may take some time, up to a few hours in some cases. If the following message appears Setup Channel Setup Disc Video Audio Display TV Screen VHS , to select “Other Functions”, then ENTER , to select “Setup”, then ENTER , to select “Setup”, then . , to select “Clock Settings”, then ENTER Set Clock Automatically Perform steps 1–5 of “Clock Settings”. , to select “Set Clock Automatically”, then ENTER ENTER to start auto setting.
Other Settings Using the Unit’s Remote Control to Operate the TV and the Set Top Box (Cable Box, Satellite Receiver, etc.
Manufacturer Sva Sylvania Symphonic Syntax-Brillian Tatung Thomson Toshiba Ultra Products Viewsonic Westinghouse Yamaha Zenith Code 0587 / 0748 / 0768 / 0865 / 0870 / 0871 / 0872 0020 / 0028 / 0030 / 0054 / 0065 / 0096 / 0171 / 0381 0171 / 0180 1007 / 1144 / 1240 / 1255 / 1257 / 1258 / 1331 0003 / 0049 / 0055 / 0396 / 1756 0209 / 0210 / 0047 0036 / 0060 / 0149 / 0154 / 0156 / 0650 / 0832 / 0845 / 1156 / 1256 / 1265 / 1356 / 1656 / 1704 0391 0857 / 0864 / 0885 / 1755 0885 / 0889 / 0890 / 1282 / 1577 0019 /
Control Reference Guide Remote Control Turn the unit on or off .................................................( 6) Select drive (DVD or VHS) .........................................( 7) Select channels and recording numbers etc./ Enter numbers............................................................( 6) Cancel/Reset the tape counter Basic operations for recording and play Skip the specified time/ Jet rewind button (JET REW).............................( 20, 24) Direct Navigator .....
Main Unit Remote Control signal sensor Cassette compartment Disc tray OPEN/CLOSE EJECT CH DRIVE SELECT POWER REC COPYING IN 2 S VIDEO VIDEO RESET L /MONO AUDIO R The unit’s display Opening the front panel Press down on the part with your finger. COPYING COPYING DVD/VHS drive indicator .................................( 7) Cassette eject button .....................................( 65) Disc tray open/close button .............................
Disc Handling Usable Discs for Recording and Playback Rewritable Finalization Needed1 Recording 16:9 aspect picture2 Recording broadcasts that allow one copy (CPRM) ( 13) Yes No Yes Yes [RAM] No Yes No (4:3 aspect) No [-R] before finalization [DVD-V] after finalization No Yes No (4:3 aspect) No [-R]DL] before finalization [DVD-V] after finalization Yes Yes No (4:3 aspect) No [-RW‹V›] before finalization [DVD-V] after finalization +R No Yes No (4:3 aspect) No [+R] before final
Play-only Discs Disc type Standard symbol Discs that Cannot be Played Uses DVD-Video [DVD-V] DVD-RW (DVD Video Recording format) [-RW‹VR›] Audio CD [CD] High quality movie and music discs DVD-RW video recorded on another DVD recorder You can play programs that allow “One time only recording” if they have been recorded to a CPRM compatible disc. By formatting ( 37) the disc, you can record to it in DVD-Video format. It may be necessary to finalize the disc on the equipment used for recording.
MP3s and Still Pictures (JPEG) MP3 File Information Playable discs [CD] File format MP3 Files must have the extension “.mp3” or “.MP3”. Number of folders (groups) Maximum number of folders (groups) recognizable: 99 folders (groups) (including the root folder) Number of files (tracks) Maximum number of files (tracks) recognizable: 999 files (tracks) (Total number for all the MP3, JPEG and other type of files.) Bit rates 32 kbps to 320 kbps Sampling frequency 16 kHz/22.05 kHz/24 kHz/ 32 kHz/44.
Media Handling (Disc/Video Cassette) Inserting Discs Inserting a Video Cassette OPEN/CLOSE to open the tray. –Insert a disc. Insert a cassette (the surface with the roll of tape should face up). –The unit turns on automatically. Insert label-up. To eject: OPEN/CLOSE to close the tray. From the main unit: EJECT Notes Disc Care [RAM] Use cartridges to protect them from scratches and dirt.
Troubleshooting Guide If the Antenna Connector Doesn’t Match Use the following connection to suit the antenna lead to the unit’s RF IN terminal, and the 75 coaxial cable to the antenna terminals on your TV or other equipment. Refer to the other equipment’s operating instructions for more information. Type This unit Other equipment (television etc.
When Other Panasonic Products Respond to this Remote Control Tips Use this function to synchronize the codes for the remote control and the main unit when there are other Panasonic products close to your unit. To return to the previous screen Press [RETURN]. To exit the screen Press [RETURN] several times.
Troubleshooting Guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, refer to “Customer Services Directory” on page 83. The following does not indicate a problem with the unit: Regular disc rotating sound. Poor reception due to atmospheric conditions. Image disturbance during search. Periodic interruptions to the reception due to satellite broadcasting breaks.
Operation Page Change the manufacturer code on the remote control. 58 Select TV or Set Top Box mode on the remote control. 58 Cannot operate the DVD. Press [DRIVE SELECT] to select the DVD drive when operating DVDs or CDs. –Make sure the TV is on the correct channel or input mode. 7 Cannot operate the VHS. Press [DRIVE SELECT] to select the VHS drive when operating VHS cassettes. –Make sure the TV is on the correct channel or input mode.
Troubleshooting Guide Playback Issues Picture TV reception worsens after connecting the unit. This can occur because the signals are being divided between the unit and other equipment. It can be solved by using a signal booster, available from electronics retailers. The images from the unit do not appear on the TV. Picture is distorted. Make sure recorder is connected to an appropriate AV input of the TV. Page − 47 to 49 Make sure the TV’s input setting (e.g., VIDEO 1) is correct.
Playback Issues No sound. Low volume. Distorted sound. Cannot hear the desired audio type. Sound Check the connections and the “Digital Audio Output” settings. Check the input mode on the amplifier if you have connected one. 42, 52 Check if TV is muted. − Check if amplifier is muted. − Press [AUDIO] to select the audio. Cannot switch audio. Page 20, 26 Sound is not output while fast-forwarding during chasing playback and simultaneous record and playback. − Set “V.
Troubleshooting Guide Playback Issues Operation Play fails to start even when [ PLAY] is pressed. Play starts but then stops immediately. Insert the disc correctly with the label facing up. Ensure disc is for the correct DVD-Video region number, and is not defective. The disc is dirty. Page − Cover 65 You tried to play a blank disc or a disc that is unplayable on the unit.
Playback Issues VHS Sound Page Cannot hear the desired audio type. Press [AUDIO] to select the audio. 26 There is noise when playing a video tape. Adjust the tracking. 25 The tape is old or damaged. − Playback Issues VHS Play Page Cannot play. Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be played. − The playback screen flickers. The video head is dirty. 3 The tape is old or damaged.
Troubleshooting Guide Recording Issues DVD Recording/Scheduled Recording/Copying/External Input (continued) Page The scheduled recording program remains even after recording finishes. The scheduled recording program remains if set to daily or weekly. 9, 18 Part or all of a recording has been lost. If the power shuts down or the plug is disconnected from the household AC outlet while recording or editing, the program may be lost or the disc may become unusable.
Editing Issues DVD Page The disc is dirty. Wipe with a damp cloth and then wipe dry. 65 Disc may be defective or of poor quality. − You tried formatting a disc that is not compatible with the unit. 37 [+RW] Discs created on a computer may not be formatted. − The unit writes the chapter division information to the disc when you turn it off or remove the disc. The information is not written if there is an interruption in the power. − These operations are not possible with still pictures.
Frequently Asked Questions Page Setup What equipment is necessary to play multi-channel surround sound? You cannot play back multi-channel sound on this unit without other equipment. You must connect this unit with an optical digital audio cable to an amplifier with a built-in Dolby Digital or DTS decoder. 52 Can the headphones and speakers be directly connected to the unit? You cannot directly connect to the unit. Connect through the amplifier, TV, etc.
Page Recording Can I record from a commercially purchased video cassette or DVD? Most commercially sold video cassettes and DVDs are copy protected; therefore, recording is usually not possible. − Can DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL, and +RW recorded on the unit be played on other equipment? You can play these discs on compatible equipment such as DVD players after finalizing the disc on this unit. 38 [+RW] It is not necessary to finalize.
Error Messages On the Unit’s Display H ,F (“ ” stands for a service number.) RC (“ ” stands for a number.) HARD ERR (“HArd” and “Err” are alternately displayed.) Page An error has occurred. The number following “H” or “F” depends on the status of the unit. Check the items below and in the Troubleshooting Guide. If the service number still does not disappear after the check, reset the unit ( 67, “To restore the unit if it freezes”).
Page On the TV The program was copy-protected. − The disc may be full. − There are already 99 recordings ([+R] [+R]DL] [+RW] 49 recordings). − Cannot play. You inserted an incompatible disc (discs recorded in PAL video, etc.). − Cannot record on the disc. The disc may be dirty or scratched. 65 Cannot finish recording completely. Unable to format. Please check the disc. Cannot record. Disc is full. Cannot record. The number of recordings has exceeded the maximum limit.
Product Service 1.Damage requiring service−The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2.Servicing−Do not attempt to service the unit beyond that described in these operating instructions.
Specifications Power supply: Power consumption: Standby mode: (Shipping Condition) (User Setting: Quick Start: ON) AC 120 V, 60 Hz Approx. 30 W Approx. 2.4 W Approx. 13.2 W Recordable discs: DVD-RAM: 2x SPEED (Ver. 2.0) 2−3x SPEED (Ver. 2.1) 2−5x SPEED (Ver. 2.2) DVD-R (SL): 1x SPEED (Ver. 2.0) 1−4x SPEED (Ver. 2.0) 1−8x SPEED (Ver. 2.0) 1−16x SPEED (Ver. 2.1) DVD-R (DL): 2−4x SPEED (Ver. 3.0) 2−8x SPEED (Ver. 3.0) DVD-RW: 1x SPEED (Ver. 1.1) 1−2x SPEED (Ver. 1.1) 2−4x SPEED (Ver. 1.2) 2−6x SPEED (Ver. 1.
Glossary Bitstream Frame and field This is a signal compressed and converted into digital form. It is converted back to a multi-channel audio signal, e.g., 5.1-channel, by a decoder. Frame refers to the single images that constitute the video you see on your TV. Each frame consists of 2 fields. W CPRM (Content Protection for Recordable Media) CPRM is technology used to protect broadcasts that are allowed to be recorded only once.
Limited Warranty Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic DVD Recorder Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc.
Referencia rápida en español (Spanish Quick Reference) Conexión básica Preparación: Encienda la televisión y seleccione el canal 3. Nota: Puede que los terminales en el panel trasero de su TV no sean similares a como se ilustran a continuación. Por favor consulte las etiquetas de los terminales con atención para asegurar conexiones correctas.
TRACKING/V-LOCK , para seleccionar el “Antena” o “Cable”, luego CH ENTER También puede seleccionar canales con los botones numéricos. ENTER para iniciar el ajuste automático de canales/reloj. Confirmar la hora, luego ENTER –HL (horario de verano) muestra el ajuste para el horario de verano. –Huso h. (zona horaria) muestra la diferencia de hora con la hora del Meridiano de Greenwich (GMT). Ajuste automático del reloj Ajuste del reloj automático terminado. 4/4/2007 11:15 AM HL----------Huso h.
Referencia rápida en español (Spanish Quick Reference) Grabación de programas de televisión [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] Las emisiones digitales no pueden ser grabadas en cintas de video. Preparación: Encienda la televisión y seleccione la entrada de video apropiada a las conexiones de este aparato. [RAM] Si el disco está protegido, libere la protección. [VHS] Asegúrese de que la pestaña contra borradura accidental esté intacta.
Importante: Una vez borrados, los contenidos no podrán recuperarse. Copiar Copiar (VHS DVD) [VHS] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Preparación: Encienda la televisión y seleccione la entrada de video apropiada a las conexiones de este aparato. [RAM] Si el disco está protegido, libere la protección. Inserte un disco con suficiente espacio en blanco disponible. Seleccione el modo de grabación de DVD. Inserte la cinta VHS que contenga el programa a ser copiado.
Index Angle .................................................... 34 Audio attributes............................................ 34 language............................................ 41 receiving, recording ..................... 15, 40 Audio Language Setting ..................... 40 Auto Bilingual Selection ..................... 26 Auto Mode ............................................ 14 Change Thumbnail .............................. 32 Channel adding, deleting .................................