Operating Instructions

Getting started
SQT0984
16
Connection
3D programmes can be played back when this unit is connected to 3D compatible terminal of a
3D compatible TV.
• Keep the RF coaxial cables as far away as possible from other cables.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
When outputting 24p signal, please use HDMI cables 5.0 meters or less.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (> 89)
[BCT650] Basic connections
HDMI
VHF/UHF
RF IN
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
TV
To the CATV terminal or the aerial
CATV coaxial cable or aerial cable
RF coaxial cable
(supplied)
DMR-BST_BCT650EG_eng.book 16 ページ ２０１５年６月５日 金曜日 午後６時１８分