Operating Instructions

Getting started
SQT0984
22
Settings
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
3 Select language, then press [OK].
4 Select country, then press [OK].
5 Select the search mode, then press [OK].
7 Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
8 Select the item to match the type of TV
connected. (> 75, TV Aspect)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
To stop partway
Press [RETURN ].
To restart setup (> 70, Auto Setup)
To confirm that channels have been tuned
correctly (> 26, Using Channel List)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
After completing “Easy Setting”, you can continue
with “Easy Network Setting”.
Follow the on-screen instructions and make the
following settings.
When “Easy Network Setting is finished.” appears
Press [OK].
[BST650] Easy Setting
2 Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
6 Select “Single Cable System” or “DiSEqC”
then press [OK].
When selecting “Single Cable System”
1 Make the settings of user band.
• User Band
You can set C1 to C8. Set to a User Band
not used by any other device.
• User Band Frequency
Set the User Band Frequency with
number buttons.
• User Band PIN
If the single cable router requires a PIN
to access an user band, enter the PIN.
• For details, read the manual of the single
cable router, etc.
2 Select “Start Auto Setup”, then press
[OK].
Auto Setup starts.
These operations (Searching Satellite and
Searching Channels) may take some time.
User Band Settings
OK
Select
RETURN
Start Auto Setup
Please confirm user band settings before starting Auto Setup.
Tuner
C1
1284 MHz (preset: 1284 MHz)
User Band Frequency
Off
User Band PIN
User Band
• When selecting “Single Cable System”
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (> 77, Clock).
Easy Network Setting
Auto Setup
RETURN
Satellite
Progress
This will take up to 40 minutes.
Checking LNB1
Satellite
LNB
Press RETURN to skip Satellite installation
Searching Satellite
Checking...
0%
100%
• When selecting “DiSEqC”
Auto Setup
RETURN
Satellite
Progress
This will take up to 40 minutes.
Checking LNB1
Satellite
Tuner
Press RETURN to skip Satellite installation
Searching Satellite
Checking...
0%
100%
DMR-BST_BCT650EG_eng.book 22 ページ ２０１５年６月５日 金曜日 午後６時１８分