Operating Instructions

Watching broadcasts
SQT0984
25
When “ ” appears in channel information
(
> 24)
Press [STTL ].
• Press again to hide subtitle.
• Some subtitle contents can be displayed using Teletext.
(> below)
When “ ” appears in channel information
(> 24)
2 Use [3, 4, 2, 1], number buttons or colour
buttons, etc. according to on-screen
instructions.
• You can change the display mode. (> 74, Teletext)
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 81)
When a programme includes audio signals etc.,
you can select signals.
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Multi Audio” or “Sub Channel”, then
press [OK].
4 Select the item.
Depending on your CAM, the channel list can be
updated to the one recommended by the CAM.
To perform an update, operate following the
instructions on the screen.
• If cancelled, the notification is instead displayed
on the channel information (> 24).
e.g.,
To execute channel list upgrade, press the red
button.
• Performing an update will delete the existing channel list.
To return to the original channel list, restart “Auto Setup” in
“Basic Settings” menu. (> 69, 70)
• The timer recording programmes may be cancelled. Please
confirm a timer programme. (> 34)
To show subtitle
To change subtitle language
1 Press [OPTION].
2 Select “Subtitle Language” in “Digital TV
Menu”, then press [OK].
3 Select the desired language.
• Press [EXIT ] to exit the screen.
To show the Teletext
1 Press [TEXT ].
• When the Teletext of data service is
displayed, press [TEXT ] again.
Aspect
To select the contents in the broadcast
About Operator profile
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Operator Profile Info
DMR-BST_BCT650EG_eng.book 25 ページ ２０１５年６月５日 金曜日 午後６時１８分