Operating Instructions

Recording
SQT0984
30
Timer recording
• Some broadcasters may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (> 32)
• You can set the start and finish time to make the timer
recording work successfully. (> 72, Timer Record Start
Buffer, Timer Record Stop Buffer)
Refer to “Using TV Guide system”. (> 26)
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 32, “Manually
programming timer recording”.
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“F” disappears)
Refer to “Operation during Recording”. (> 29)
• You can enter up to 32 programmes within a
month in advance. (Each daily or weekly
programme is counted as one programme.)
• About CI Plus restriction (> 15)
Preparation
If you want to change the recording mode:
Press [REC MODE] and select the recording
mode, then press [OK].
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press the
red button.
The timer icon “F” (red) is displayed.
• If on-screen instructions are displayed,
follow them.
To use TV Guide system
To edit the timer recording on the TV Guide
screen
To cancel a timer recording on the TV Guide
screen
Operation during Recording
DMR-BST_BCT650EG_eng.book 30 ページ ２０１５年６月５日 金曜日 午後６時１８分