Operating Instructions

With Other Equipment

SQT0984

Registering the external HDD (USB HDD)

Disconnecting without following this procedure

may result in the loss of recorded content from

the USB HDD or the internal HDD.

1 Press [SETUP].

2 Select “Settings for USB HDD” in “HDD /

Disc / USB HDD”, then press [OK].

3 Select “USB HDD Disconnection”, then

press [OK].

4 Select “Yes”, then press [OK].

5 Disconnect the USB HDD from this unit.

• If the registering screen appears when

connecting the USB HDD, go to step 4.

1 Press [SETUP].

2 Select “Settings for USB HDD” in “HDD /

Disc / USB HDD”, then press [OK].

3 Select “USB HDD Registration”, then press

[OK].

5 When the registering is complete, message

screen appears.

Press [OK].

6 The confirmation screen appears.

Press [OK].

To cancel all USB HDD registrations (> 73)

• It is not possible to play back the content on the USB HDD

whose registration has been cancelled.

• You can check the registration number of the USB HDD on

the Video Menu. (> 35)

Disconnecting the USB HDD Registering the USB HDD

4 Select “Yes”, then press [OK].

DMR-BST_BCT650EG_eng.book 64 ページ２０１５年６月５日　金曜日　午後６時１８分