Operating Instructions

Convenient functions
SQT0984
71
Update Channel List
You can update the channel list to the latest one.
1 Select the method and settings.
Search Mode
• Free Channels
• All Channels
Scan Mode
•Quick
Scans the suitable frequency for the
selected satellite.
•Full
Scans the whole frequency range.
2 Press [OK].
The unit starts searching for newly available
satellite digital channels.
• This function is not available during an Operator profile
update. (> 25)
• If the channel you are looking for is not found, select “Full”
for “Scan Mode”. (> above)
Signal Condition
You can check the quality and strength of
signals.
• Press [2, 1] to select the LNB.
• Press [CH WX] to select the channel.
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
• When the signal is weak:
- adjust the position and direction of the dish.
- check that the current digital broadcast channel is
correctly broadcasting.
Antenna System
You can receive several satellites if you have
DiSEqC control antenna system or single cable
router.
1 Select “Antenna System”.
2Press [2, 1] to select antenna system.
• One LNB
Compatible with Single LNB.
• MiniDiSEqC
Up to 2 LNBs can be controlled.
• DiSEqC1.0
Up to 4 LNBs can be controlled.
• Single Cable
Compatible with single cable router.
LNB Configuration
You can set LNB setting and User Band when
necessary.
• If you do not know the connected satellite,
select “No Satellite” in “Satellite”. (Available
satellite will be searched in Auto Setup.)
• If you select “User defined” in “Satellite”, set
“Test Transponder Frequency” manually.
Preferred Language (> 70)
DMR-BST_BCT650EG_eng.book 71 ページ ２０１５年６月５日 金曜日 午後６時１８分