Operating Instructions
Convenient functions
SQT0984
74
Basic Settings
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
• There is no effect on “Bitstream” via HDMI AV
OUT terminal.
• The audio will be output in “Stereo” in the
following cases.
- AVCHD playback
- [BD-V] : Playback of clicking sound on the
menu and audio with secondary video in
picture-in-picture mode.
Bilingual Audio Selection
Select whether to record the audio type (“M1” or
“M2”) when:
- File Conversion (> 46)
- Copying to a DVD-R, DVD-RW, +R and +RW.
Digital Audio Output
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
Select the audio signal to output.
• Select “PCM” when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
System Volume Adjustment
If the volume of a programme being watched
through this unit is different than the volume
of a programme being watched directly on the
TV, changing this setting may reduce the gap.
(This function works only while you are
watching a programme or playing back a
programme recorded in DR mode with this
unit.)
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Display
Language
Select the language for on-screen menus.
On-Screen Information
Select the time until the channel information
screen (> 24) disappears automatically.
Front Panel Display
Changes the brightness of the front panel
display.
• If “Automatic” is selected, the display turns dark
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
• When “Quick Start” is set to “Off” or “Timer
Setting for Quick Start” (> 76), this function is
fixed to “Automatic”.
Screen Saver
This is to prevent image retention on the screen.
Teletext
Select the Teletext (> 25) display mode.
DMR-BST_BCT650EG_eng.book 74 ページ 2015年6月5日 金曜日 午後6時18分