Operating Instructions

Troubleshooting
SQT0807
106
Troubleshooting guide
No sound.
Distorted sound.
Check the connections. (> 16, 17)
Check the settings of the connected TV, etc.
Press [AUDIO] to select the audio. (> 27, 51)
To output audio from a device connected with an
HDMI cable, set “HDMI Audio Output” to “On”.
(> 93)
Cannot change audio channel.
You cannot change the audio channel if “Digital
Audio Output” is set to “Bitstream” (> 91)
Cannot record.
Cannot copy.
Some broadcasts are copyright protected.
You cannot record to the disc by pressing the
[REC ¥] or timer recording.
The disc is protected. (> 101)
[DVD-R] [DVD-RW] [+R] [+RW] Since it will copy to
HDD temporarily, copying is not possible if there
is insufficient available capacity on the HDD.
This unit cannot record/copy NTSC signals to
discs that already have PAL signal recordings.
A part or whole of a recorded title has been
lost.
If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD may become unusable. We cannot offer
any guarantee regarding lost programmes.
An unusually loud sound is coming from the
rotating disc.
If you want copy to perform more quietly, select
“Normal ( Silent )” in “Disc Speed for High
Speed Copy”. (> 90)
The time recorded on the disc and the
available time shown do not add up.
[DVD-R] [+R] If you record or edit many times, the
remaining capacity is reduced and then
recording or editing may be disabled.
Available disc space display may be different
from actual.
Encrypted titles cannot be decrypted.
Depending on the encrypted service, it may not
be possible to decrypt certain content.
[BCT855] [BCT850] [ B S T 855] [BST8 50]
Keyword Recording does not work properly.
The Keyword Recording function can search the
First 250 channels listed on “All DVB Channels”
or the First 50 channels registered for
“Favourites1”. (> 85, 87)
The unit may not record a Keyword Recording
programme when part of its broadcast time
overlaps with that of another timer-recording
programme. When this occurs, the Keyword
Recording does not start even after the
timer-recording has finished.
When “Search Channel” is set to “First 50
Favourites1”, the unit does not search for
programmes unless you register channels to
“Favourites1”.
Sound
Recording, timer recording and
copying
Timer recording does not work properly.
When is displayed on the screen. (> 39)
If your CAM requires a PIN for timer recording,
you need to enter PIN in advance. (> 89, PIN
Entry for Decrypt Recording)
Auto Renewal Recording does not work
properly.
The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as Video Menu is displayed
Instead, the programme will be saved as a
separate programme and that will be
overwritten.
DMR-BST_BCT855EG_eng.book 106 ページ 2015年6月4日 木曜日 午後2時58分