Operating instructions

∫ Playback
15
[HDD] [RAM] (Only with Dolby Digital)
You can increase the speed of play
without disrupting the soundtrack.
During Play
Press and hold [1, PLAY/t1.3].
ªTo return to normal speed.
Press [1, PLAY/k1.3].
Note
≥Output is in PCM when using a digital connection ([A] page 50).
≥This is cancelled when you perform skip, pause, or when play
reaches a point where a programme recorded in sound other
than Dolby Digital starts.
≥This does not work if the setting is “Off” in “PLAY t1.3 & Audio
during Search” (page 54).
≥This does not work when recording is in XP or FR mode during
simultaneous recording and play (page 19). [RAM]
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
[1] During play
Press [∫, STOP].
≥The unit memorises the position.
[2] Press [1, PLAY/t1.3].
≥Play starts from where you stopped it.
ªTo cancel the resume function
Press [∫, STOP] while the unit remembers
the position.
(The position is also cleared when you turn
the unit off.)
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
You can start play from a momorised position even after turning
the unit off.
[1] During play
Press [POSITION MEMORY].
The message “Position Memorized” appears on the TV.
[2] After switching the unit to standby and back on
Press [1, PLAY/t1.3].
Play starts from the momorised position. (The position is
cleared.)
Note
[DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
≥The position is cleared when you open the disc tray.
[RAM]
≥Positions remain memorised even after the disc tray is opened.
≥You cannot mark positions if the disc is write-protected with DISC
INFORMATION (page 31) or with the write protect tab (page 64).
Release the protection before marking position.
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
During play
Press [6, SLOW/SEARCH] or
[5, SLOW/SEARCH].
≥Press and hold [:/6] or [5/9] on the main unit.
≥There are 5 search speeds. Each press increases the search
speed.
≥Press [1, PLAY/k1.3] to restart playback.
≥Sound is output only in the first level of fast forward. In the case
of DVD-A (except parts of moving picture), CD and MP3, it is
output in all levels.
≥You can turn this sound off if you want to (page 54, “Sound”—
“PLAY t1.3 & Audio during Search”).
[HDD] [RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V]
[VCD]
While paused
Press [6, SLOW/SEARCH] or [5,
SLOW/SEARCH].
≥Press and hold [:/6] or [5/9] on the main unit.
≥It pauses automatically when the slow motion play is continued
for about 5 minutes.
≥The speed increases up to 5 steps.
≥Press [1, PLAY/k1.3] to restart playback.
≥Backward ([6], [:/6]) does not work with Video CDs.
[HDD] [RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V]
[VCD]
While paused
Press [2;, FRAME], [;1, FRAME], [2]
or [1].
≥Each press shows the next or previous frame.
≥Press [1, PLAY/k1.3] to restart playback.
≥Backward ([2;], [2]) does not work with Video CDs.
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
During play or while paused
Press [:, SKIP] or [9, SKIP].
You can skip programmes, scenes and tracks each time you press
them.
For your reference
≥When the marker (page 17) is set, you can skip the marker
position.
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]
Starting play from a selected programme, title, chapter or track.
During play or while stopped
Press the numeric buttons to select the
item.
e.g.: “5”: [0] )[5]. [HDD] [MP3] “5”: [0] )[0] )[5]
“15”: [1] )[5]. “15”: [0] )[1] )[5]
[DVD-A]
≥A group number can be specified while
the screen saver is displayed.
e.g.: “5”: [5]
≥Playing bonus groups
Some discs contain bonus groups. If a
password screen appears after selecting
a group, enter the password with the numeric buttons and press
[ENTER]. Refer also to the disc’s jacket.
Quick View (Play t1.3)
Starting play from where you
stopped it (Resume Function)
Position Memory
Fast forward and rewind—SEARCH
PLAY
DVD-RAM
PLAY x1.3
DVD-RAM
L R
DVD-RAM
••••
Slow-motion play
Frame-by-frame viewing
Skipping
Direct Play
≥To playback still pictures (page 42)
≥To playback SD Video (MPEG4) (page 47)
DVD(PAL).book 15 ページ ２００３年７月１６日 水曜日 午後３時２１分