Operating instructions

∫ Advanced Operations
51
(1) Decoder, satellite receiver or digital receiver (not supplied)
(2) 21-pin Scart socket
(3) 21-pin Scart cable (not supplied)
Connect a 21-pin Scart cable (not supplied) to the AV2
21-pin Scart socket on this unit and to the 21-pin Scart
socket on the decoder, satellite receiver or digital receiver.
Connect the mains lead of decoder, satellite receiver or
digital receiver to an AC mains socket.
≥If you connect an other equipment with RGB output capability to
the AV2 socket on this unit, the output signal of the equipment
must be set to RGB when you have set “AV2 Input” to “RGB (PAL
only)”.
Note for decoder
≥Decoder here means the device used to decode scrambled
broadcasts (Pay TV).
≥Set “AV2 Connection” to “DECODER”. (page 55)
Note for satellite receiver and digital receiver
≥Set “AV2 Connection” to “EXT”, “Ext Link 1” or “Ext Link 2”.
(page 55)
When connecting to the AV3/DV input terminals on the
front of the unit
≥You can also connect to the AV4 input terminals on the rear of the
unit.
Before connecting any cables, first make sure that the power for
both units is off. Then after connecting any cable, turn on the
both units.
Note
≥If the audio output of the other equipment is monaural, connect to L/
MONO. (Both left and right channels are recorded when connected
through L/MONO.)
≥The DV input on this unit is for use with DV cameras only.
Connecting a decoder, satellite receiver or digital receiver
(1)
(2)
(3)
AV Link Function
If the unit is connected to the TV via a 21-pin Scart cable, you
can use [AV LINK] to switch the TV from normal TV reception
to the DVD playback channel (AV input) (and vice versa). In
the unit mode (when the “DVD” indication in the unit display is
lit), the TV is switched to the video playback channel (AV
input). In the TV mode (when the “DVD” indication is not lit),
the TV is switched to TV reception.
AV link stops working if the “DVD” indicator appears on the
display (when you start play or show the displays).
Note
[RGB] means separate Red/Green/Blue colour signals. If you
connect a TV equipped with RGB input capability to the AV1
socket on this unit, and a decoder equipped with RGB output
capability to the AV2 socket, the TV can receive RGB signal
input from the decoder via the unit.
RGB output signals only appear when the “DVD” indicator is
on. To show RGB output signals while stopped or recording,
press [AV LINK] so the “DVD” indicator lights.
Connecting an external device
AV3
(1) (3)
(4)
(2)
(1) S video cable (not supplied)
(2) Audio/Video cable (not supplied)
A Yellow (VIDEO)
B White (L)
C Red (R)
(3) 4-pin DV cable (not supplied)
(4) Other playback equipment
DVD(PAL).book 51 ページ ２００３年７月１６日 水曜日 午後３時２１分