Operating instructions

∫ Various Setting
60
Displays appear on the TV when operating the unit to show you
what operation was performed and what condition the unit is in.
Press [STATUS] to change the
information displayed.
The display changes each time you press the button.
For example, HDD
(1) Currently selected drive (HDD/Disc
Indication Display)
(2) Current recording or play status,
input channel
≥Shows the current state of the unit
and the input channel.
REC: Recording
DV AUTO REC: Recording DV AUTO REC
PAU SE: Recording paused
PLAY: Playing
PLAY t1.3: Quick Viewing (Play k1.3)
;: Playing Paused
5: Fast forwarding (5 speeds)
6: Rewinding (5 speeds)
F: Slow-motion (5 speeds)
G: Reverse slow-motion (5 speeds)
(3) Audio type
≥Shows the selected audio type.
Stereo: a stereo broadcast is being received
M1/M2: a multiple audio broadcast is being received
M1: a NICAM monaural broadcast is being received
(4) Sound mode
LR, L, R:
when you have changed the audio with the remote control’s
[AUDIO]
(5) Status of other, currently unselected drive
HDD recording/DVD recording :
the recording drive is indicated
TRAY OPEN/TRAY CLOSE :
Indicates the status of the disc tray when the HDD drive is
selected.
(6) Available recording time and recording mode
(e.g.: “2:34 XP” indicates 2 hours and 34 minutes in XP mode)
(7) The current date and time
(8) Recording time
≥Shows recording time, recording mode and a rough guide to
how much space has been used for recording on the disc.
(9) Elapsed play time
(10)Play position
(11)Amount of recording space used
(12)Video bit-rate when recording
(13)Video bit-rate when playing
(14)Bit-rate display
≥Shows as Mbps (Mega-bit(s) per second) during play and
recording, or kbit (kilo bit(s)) while paused.
≥The method of calculating bit-rate for recording and playing is
different so there may be differences in the figures displayed.
(Values are approximate.)
For your reference
≥These displays may not be shown if “On-Screen Messages” in
the “Display” menu is set to “Off” (page 55). If set to “Automatic”,
displays (1), (2), (3), (4) and (5) appear for 5 seconds and then
disappear.
Status displays
Changing the information displayed
Display examples
π Remain 2:34 XP+E10:15:00 6.8
π PRG5 1:12.12 XP
π PRG1 0:00.04 SP
0 . . . . 5 . . . . 10
Bit Rate
π REC 1.2Mbps EP
π PLAY 1.2Mbps EP
REC
PLAY
L R
TRAY OPEN
HDD
Stereo
REC
PLAY
L R
TRAY OPEN
HDD
Stereo
REC
PLAY
L R
TRAY OPEN
HDD
Stereo
No display
REC
PLAY
L R
TRAY OPEN
HDD
Stereo
(1)
(2)
(3)
(4)
(5)
π Remain 2:34 XP+E10:15:00 6.8
π PRG5 1:12.12 XP
π PRG1 0:00.04 SP
(7)
(8)
(9)
(10)
(11)
(6)
0 . . . . 5 . . . . 10
Bit Rate
π REC 1.2Mbps EP
π PLAY 1.2Mbps EP
(12)
(13)
(14)
DVD(PAL).book 60 ページ ２００３年７月１６日 水曜日 午後３時２１分