Operating Instructions - Language - English

∫ Advanced Operations
47
You can organize the recorded programme by erasing or other
operation.
≥Check available cards (page 10).
Preparation
≥Release protection (disc # page 31, cartridge # page 64,
card # page 10).
≥Insert a disc or card (pages 13, 42)
[1] While stopped,
Press [FUNCTIONS]. (page 23)
[2] Select “SD
VIDEO
(MPEG4)”
with [3, 4,
2, 1] and
press
[ENTER].
[3] Check if “Input” is selected and press
[ENTER].
[4] Select the drive (HDD/DVD/SD CARD/
PC CARD) with [3, 4] and press
[ENTER].
[5] Use [3, 4] to select a desired item
and press [ENTER].
ªTo stop it halfway
Press [RETURN].
[SD] [CARD] [HDD] [RAM]
[6] Use [3, 4]
to select the
desired
programme.
[7] Press
[ENTER] to
play.
≥The picture is enlarged
according to the display frame in this unit (320k240). Therefore,
the aspect ratio may differ from that of the original picture.
≥You can also select the programme by entering a 3-digit number
with the numeric buttons.
≥When there are many folders on Mobile hard disk other than
displayed, you can move to them with [:, SKIP] or
[9, SKIP].
≥The recording date may differ from that of the original data.
≥In case of a TV station with Teletext information, the title of the
TV programme is entered automatically, provided the “Title page”
is correctly set. (page 58)
≥In case of a TV station with Teletext information, it may take over
30 minutes to get the title or may fail to get.
Icon explanation
The programme is not allowed to record by copy-guard.
t The programme cannot be played.
The audio cannot be output in this programme.
The title cannot be entered on this programme.
For your reference
When playing back SD VIDEO (MPEG4), the recording mode
cannot be displayed because the bit rate is changed according to
the picture quality. You can check the bit rate of the recorded
programme in “Properties” (page 48).
[SD] [HDD] [RAM]
[6] Select “Yes” with [2] and press
[ENTER].
[7] Select “Start” with [2] and press
[ENTER].
All MPEG4 programmes are erased.
For your reference
≥Keep pressing [RETURN] for 3 seconds or more to cancel. (The
programmes are erased until this unit recognizes the
cancellation.)
≥When All erase is carried out, the files which are not compatible
with this unit may be erased.
[SD]
To erase all of contents of the card or to use unformatted
card.
[6] Select “Yes” with [2] and press
[ENTER].
[7] Select “Start” with [2] and press
[ENTER].
≥Formatting starts.
For your reference
≥Do not turn the unit off or disconnect the AC mains lead
until the ending message (only in All Erase and SD Card
format) appears. The card may be disabled.
≥Once erasing and formatting are carried out, materials including
the data from a computer cannot be recovered. Check them
carefully before proceeding. (When formatting in SD Card format
programme protect is set on them, all programmes are erased
even if they are protected.)
Editing SD VIDEO (MPEG4) programmes
RETURN
ENTER
SELECT
Input
HDD
Play
Erase all programmes
Format SD CARD
SD VIEDEO
(MPEG4)
HDD
1 Play
RETURN
ENTER
SELECT
0 – 9
No.
SD Card
SD VIEDEO
(MPEG4)
No. DateName Start EditTitle
13/ 8 WED 4 10:00
9:00
Auto action
Dinosaur
13/ 8 WED 6
3
3
002
001
The following
operation is possible
on the SD VIDEO
(MPEG4) playback
screen.
≥To stop: Press
[∫,STOP].
≥To pause: Press
[;,PAUSE].
≥For Fast forward or
rewind (SEARCH):
Press [6, SLOW/
SEARCH] or [5,
SLOW/SEARCH].
- When pressing these buttons, only the time display goes
forward or backward while a part of the SD VIDEO (MPEG4)
is displayed as a still picture.
- There are 3 search speeds. Each press increases the search
speed.
≥To skip: Press [:, SKIP] or [9, SKIP]. (page 15)
≥For manual skip: Press [MANUAL SKIP]. (page 16)
≥To erase: Press [ERASE], then select “Erase” with [2] and
press [ENTER].
≥To dub: “One Touch Dubbing”, page 27.
PLAY
PRG 1
HDD
0:00.36
≥You can turn on and off the indication
on the upper right of the screen by
[STATUS].
1 Erase all programmes 1 Format SD CARD
DVD(PAL).book47ページ２００３年１０月９日 木曜日 午前１１時３２分