Complete Operating Instruction manual

18
Selecting TV screen type
The aspect ratio is factory set to 4:3 for a regular television. You do not have to change this setting if you have a regular 4:3 aspect television.
Preparation
≥
Turn on the television and select the appropriate video input to suit the connections to this unit.
≥
Switch [DVD, TV] (15) to “DVD”.
1
Press [DVD, Í
ÍÍ
Í] (1) to turn this unit on.
2
Press [FUNCTIONS] (11) to show the FUNCTIONS window.
3
Use [3, 4, 2, 1] (10) to select “SETUP” and press [ENTER] (10).
4
Use [3, 4] (10) to select the “Connection” and press [2] or [1].
5
Use [3, 4] (10) to select “TV Aspect” and press [ENTER] (10).
6
Use [3, 4] (10) to select the TV aspect and press [ENTER] (10).
≥
4:3 (factory setting)
≥
16:9
ªTo return to the previous screen
Press [RETURN] (23).
For your reference
Apart from “TV Aspect”, other settings also affect how video appears on your television. Check the following if video doesn’t appear correctly
on your television.
≥
“Connection”—“Norm (4:3) TV Settings (DVD-RAM)” or “Norm (4:3) TV Settings (DVD-Video)” (page 61).
≥
The video setting on the disc. How video appears is often specified by the disc itself.
≥
The video settings on your television.
N
S
N
S
Disc Protection
DIRECT NAVIGATOR CREATE PLAY LIST
PLAY LIST TIMER RECORDING
TOP PLAY FLEXIBLE REC
Off
Cartridge Protection Off
FUNCTIONS
SELECT
ENTER
RETURN
DISC INFORMATION
PLAY
SETUP
DVD-RAM
Tab
SELECT
TV Aspect
Normal (4:3) TV
Tuning
SETUP
RETURN
Settings
Disc
Picture
Sound
Display
Connection
TV System
Norm (4:3) TV Settings (DVD-Video)
Norm (4:3) TV Settings (DVD-RAM)
AV1/AV2 Settings
SETUP
Settings
Disc
Picture
Sound
Display
Connection
Tuning
SELECT
ENTER
TV Aspect
RETURN
Norm (4:3)
Wide (16:9)
B.book 18 ページ ２００２年８月５日 月曜日 午後１時１０分