Quick Start Guide (EB) EN

- 4 -
Connections (with S-Video cable)
Connections and preparations for a TV with S-Video socket.
The conventional video sockets of DVD Recorder’s output (input) a combination of the luminance signal (Y) and colour signal (C)
which are recorded on the disc. The S (Separate)-Video socket allows separate transmission of signals in order to obtain clearer
pictures.
The connection with S-Video Cable can also be used for playback of any disc. The “S” in the “S-Video socket” stands for
“SEPARATED Y/C” not for “S-VHS”.
Recording from Set Top Boxes (STB) or other Satellite Receivers (SAT)
ª Recording video signal by “Sky personal Planner” and “External Link 1” Functions
To record programmes from satellite receiver using “Sky Personal Planner” function together with the “External
Link1” function of this DVD Recorder:
• Make connections as shown.
• Change the settings in the SETUP menu as follows (page 61 of Operating Instructions).
- “AV2 Input” set to “Video”
- “AV2 Connection” set to “Ext Link 1”
- “AV1 Output” set to “RGB” or “S-Video” or “Video” to suit the AV terminal of your TV.
• Set up Personal Planner programmes as required.
• Press [EXT LINK] (40) on the DVD Recorder.
“External Link1” function can only be used with the “Sky Personal Planner” function for timer recording of video
signal from the “VCR Scart” terminal of the Sky Digital Set Top Box.
ª Recording RGB Signals
Most Satellite Receivers are capable of outputting RGB signals for viewing on television through a Scart terminal (called “TV Scart” on a Sky
Digital STB).
In the case of a Sky Digital STB, recording of RGB signals from the “TV Scart” terminals is possible, but the “Personal Planner” function for timer
recording cannot be used in conjunction with the “External Link1” function of this DVD Recorder.
To record programmes by RGB signals:
• Make connections as shown.
• Set your Sky Digital STB to output “RGB” signals.
• Change the settings in the SETUP menu as follows (page 61 of Operating Instructions).
- “AV2 Input” set to “RGB”
- “AV2 Connection” set to “NORMAL”
- “AV1 Output” set to “RGB” or “S-Video” or “Video” to suit the AV terminal of your TV.
• Set up Personal Planner programmes as required.
• Follow the steps for setting up timer programming.
After setting Personal Planner programmes as required, Sky Digital STB must be left on (not set to
standby) to ensure continuous output of RGB signals.
It is not possible to use the “External Link 1” function of the DVD Recorder for timer recording of RGB
signals from the Sky Digital STB.
RF IN
RF OUT
OPTICAL
AV1 ( TV)
AV2 (DECODER/EXT)
DIGITAL AUDIO OUT
(PCM/BIT STREAM)
R - AUDIO - L VIDEO
S-VIDEO
R - AUDIO - L VIDEO
S-VIDEO
AV4 I NOUT
Aerial
(not supplied)
Aerial Input
socket
Audio/video
Input socket
TV with S-Video
Input socket
(not supplied)
To AC Mains
socket
S-Video Input
socket
Audio/Video cables
(supplied)
RF lead
(supplied)
S-Video cable
(not supplied)
RF Output
socket
RF Input socket
S-Video
Output socket
Audio/Video
Output socket
AC Mains lead (supplied)
AC Input
socket
DVD-Recorder
STB/SAT
AV
TV
AV2
AV1
VCR Scart
DVD-Recorder
STB/SAT
AV
TV
AV2
AV1
TV Scart
Page4,5.fm 4 ページ ２００３年１月１５日 水曜日 午後６時４３分