Operating Instructions EB Model Quick Start Guide

ManualsBrandsPanasonic ManualsDVD-playersDMRES20DEB

QUICK START GUIDE

DVD Recorder

Model No.

DMR-ES20DEB

How to use this Guide

Page

Connecting with 21-pin Scart cable 2

Connecting with AV cable / S Video cable 3

Auto-Setup with Q-Link 4

Auto-Setup without Q-Link

Connecting with RF cable (Aerial cable) 5

Auto-Setup with RF cable (Aerial cable)

Removing interference / 6

Changing RF output channel

Checking the settings after Auto Setup 6

Dear customer,

may we take this opportunity to thank you for

purchasing this Panasonic Recorder.

Please use this Quick Start Guide to help you set up

your DVD Recorder. We would also advise you to

carefully study the operating instructions and note the

listed precautions before use.

DVD

Condensation precaution

This DVD Recorder is not fitted with a condensation

sensor. If you bring in the DVD Recorder from a cold

place, e.g. a car, into a warm house, dew may form

inside the DVD Recorder.

Do not switch it on for at least 1 hour.

Check that you have the accessories and items shown

Quick Start Guide

AC mains lead

RJA0044-3C

RF cable

Guarantee Card

ccessories

Included

Remote control

EUR7729KK0

K1TWACC00001

K2KA6CA00001

Batteries for the

remote control

R6 size

Operating Instructions

Audio / Video cable

Fit the batteries into

the remote control

Sales and Support Information

Customer Care Centre

For customers within the UK:

08705 357357

Visit our website for product information:

www.panasonic.co.uk

E-mail:

customer.care@panasonic.co.uk

Direct Sales at Panasonic UK

Order accessory and consumable items for your product with

ease and confidence by phoning our Customer Care Centre

Monday - Thursday 9:00am - 5:30pm, Friday 9:30am - 5:30pm

(Excluding public holidays).

Or go on line through our Internet Accessory ordering

application at www.panasonic.co.uk

Most major credit and debit cards accepted.

All enquiries, transactions and distribution facilities are provided

directly by Panasonic UK Ltd.

It couldn´t be simpler!

Also available through our Internet is direct shopping for a wide

range of finished products, take a browse on our website for

further details.

RQCAD0022 F11E05

- 1 -

DVD

DIRECT TV REC

VOLUME

VIDEO Plus+

DISPLAY

CANCEL

REC

EXT LINK

TIMER

STTL

Panasonic

DVD/TV

INPUT SELECT

REC MODE

PROG

TIME SLIP

PAGE

SKIP

SLOW/SEARCH

STOP

PAUSE

PLAY/x1.3

MANUAL SKIP

ERASE

CREATE

CHAPTER

STATUS

ENTER

SUB MENU

RETURN

CHECK

EUR7729KK0

Summary of content (6 pages)

PAGE 1
QUICK START GUIDE DVD Recorder Model No. DMR-ES20DEB How to use this Guide Connecting with 21-pin Scart cable Connecting with AV cable / S Video cable Auto-Setup with Q-Link Auto-Setup without Q-Link Connecting with RF cable (Aerial cable) Auto-Setup with RF cable (Aerial cable) Removing interference / Changing RF output channel Checking the settings after Auto Setup Page 2 3 4 5 6 6 Dear customer, may we take this opportunity to thank you for purchasing this Panasonic DVD Recorder.
PAGE 2
Connecting with a 21-pin Scart cable 1 Aerial S RF cable / Aerial cable RF IN Aerial input AV1 21-pin Scart socket DVD Recorder S VIDEO OUT VIDEO RF OUT RF IN L L AV1 (TV) Y PB PR AUDIO AC IN OPTICAL R R AV2 (EXT) AV4 IN S VIDEO AV4 IN OUT COMPONENT VIDEO OUT (PROGRESSIVE/ DIGITAL AUDIO OUT INTERLACE) (PCM/BITSTREAM) AC IN~ RF OUT Aerial output 4 2 RF cable / Aerial cable 3 AC mains lead S 21-pin Scart cable Necessary for TV with Q Link TV Aerial input AV1 4 AC mains lea
PAGE 3
Connecting with Audio/Video cable 1 Aerial Commonly used standard connection. RF cable / S Aerial cable Follow the steps below. RF IN Aerial input Disconnect the power from all units. DVD Recorder RF IN 1 Connect the aerial to the RF IN (Aerial input) of S VIDEO OUT VIDEO RF OUT L the DVD Recorder.
PAGE 4
Setup with Q-Link Auto-Setup Ch 35 4 Digital Suche Auto-Setup Sender, bitte in progress, warten. please wait. RETURN: RETURN: to abort abbrechen Download from TV RETURN Pos 4 (Registered trademark of Panasonic) Download from TV using You can download the tuning positions for analogue channels from the TV set. Time and date will be set automatically by the Auto Clock Setting function. Note that you must first perform a station search if you use the TV for the first time.
PAGE 5
Connecting with RF cable (Aerial cable) 1 Aerial Since optimal picture quality cannot be achieved, the connection with the RF cable is not recommended. RF cable / S Aerial cable RF IN Aerial input AC IN You can connect the DVD Recorder to your TV set by using a RF cable (Aerial cable). DVD Recorder S VIDEO OUT VIDEO RF IN RF OUT L Follow the steps below.
PAGE 6
Removing interference / Changing RF output channel In some cases, interference (lines or patterning) or a very poor picture may appear on the TV when the DVD Recorder is connected. If this happens, follow the steps below to change the video playback channel (RF output channel) to remove the interference. TV screen The picture with interference FUNCTIO NS RF OUTPUT CHANNEL DVD CH: 21 ! Press the FUNCTIONS button for more than 5 seconds. The RF output channel number is displayed on the DVD display.