2006年2月6日 月曜日 午後3時29分 Operating Instructions Convenient functions Transferring (Copying) Editing Playing back Recording DVD Recorder Model No. DMR-ES45V DMR-ES46V Getting started M6VP&PC.book 1 ページ Region numbers are allocated to DVD players and DVD-Video according to where they are sold. Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
M6VP&PC.book 2 ページ 2006年2月6日 月曜日 午後3時29分 CAUTION! Note to CATV system installer: THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
M6VP&PC.book 3 ページ 2006年2月6日 月曜日 午後3時29分 IMPORTANT SAFETY INSTRUCTIONS/Unit care IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. (1) (2) (3) (4) (5) (6) (7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.
M6VP&PC.book 4 ページ 2006年2月6日 月曜日 午後3時29分 Table of contents Getting started IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . 3 Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disc and card information . . . . . . . . . . . . . . . . . . . . . . . . . 6 Discs you can use for recording and play . . . . . . . . . . . . . . . . . 6 Play-only discs . . . . . . . . . . . . .
2006年2月6日 月曜日 午後3時29分 Editing Editing titles/chapters . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Editing titles/Chapters and playing chapters . . . . . . . . . . . . . . Title operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥Delete Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥Album View . . . . . . . . . . . . . . . . . . . . . . .
M6VP&PC.book 6 ページ 2006年2月6日 月曜日 午後3時29分 Disc and card information Discs you can use for recording and play Disc type DVD-RAM DVD-R ≥4.7 GB/9.4 GB, ≥4.7 GB, 12 cm (5z) ≥1.4 GB, 8 cm (3z) 12 cm (5z) ≥2.8 GB, 8 cm (3z) DVD-RW DVD-R DL°1 rR°2 GB, 12 cm (5z) ≥4.7 (dual layer on ≥4.7 GB, 12 cm ≥1.4 GB, 8 cm (3z) single side) (5z) ≥8.5 GB, 12 cm (5z) +RW +R DL°1 ≥4.7 GB, 12 cm (double layer (5z) on single side) ≥8.
2006年2月6日 月曜日 午後3時29分 Play-only discs Disc type DVD-Video DVD-Audio DVD-RW (DVD Video Recording format) Audio CD Video CD Logo – Indicated in these instructions with Instructions [DVD-V] High quality movie and music discs [DVD-A] High fidelity music discs ≥Played on this unit in 2 channels [-RW‹VR›] [CD] DVD-RW° recorded on another DVD recorder ≥You can play programs that allow “One time only recording” if they have been recorded to a CPRM compatible disc.
M6VP&PC.book 8 ページ 2006年2月6日 月曜日 午後3時29分 Disc and card information Cards usable on this unit SD Memory Card, miniSDTM Card§, MultiMediaCard Type Indicated in these instructions by [SD] Data that can be recorded and played Instructions Still pictures You can insert directly into the SD card slot. § A miniSDTM card adaptor included with the miniSDTM card is necessary. ≥You can play and copy still pictures taken on a digital camera, etc.
2006年2月6日 月曜日 午後3時29分 Disc and card information M6VP&PC.book 9 ページ Using DVD-R, DVD-R DL, DVD-RW, +R, +R DL and +RW on this unit Restrictions with DVD-R, etc.° ≥16:9 aspect programs are recorded in 4:3 aspect. ≥Either Main or SAP can be recorded for MTS broadcasts. ≥Playing the disc on other DVD players is not possible before finalizing. ° DVD-R, DVD-R DL, DVD-RW, +R, +R DL and +RW are collectively referred to as “DVD-R, etc.” on this page. Main SAP Hello Hola The selected audio only is recorded.
M6VP&PC.book 10 ページ 2006年2月6日 月曜日 午後3時29分 The remote control ∫ About batteries ≥Insert so the poles (i and j) match those in the remote control. ≥Do not use rechargeable type batteries. ∫ How to use the remote control Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. Remote control signal sensor R6/LR6, AA Do not: ≥mix old and new batteries. ≥use different types at the same time. ≥heat or expose to flame. ≥take apart or short circuit.
M6VP&PC.book 11 ページ 2006年2月6日 月曜日 午後3時29分 ∫ Video cassettes ≥Break off the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of adhesive tape when you want to use the video cassette for recording again. ≥You can use video cassettes with the VHS and S-VHS marks, but the unit is unable to make full use of the characteristics of S-VHS video cassettes. Tab ∫ Video cassette care ≥Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction.
M6VP&PC.
2006年2月6日 月曜日 午後3時29分 Control reference guide M6VP&PC.book 13 ページ Main unit (1) (3) (4) (5) (2) EJECT OPEN /CLOSE POWER DRIVE SELECT CH REC COPYING IN 2 (6) S VIDEO VIDEO L /MONO AUDIO R (7) (10) (11) (12) (13) (8) (9) Cassette eject button (<, EJECT) . . . . . . . . . . . . . . . . . l 24 Disc tray open/close button (<, OPEN/CLOSE). . . . . . l 24 Stop button (∫) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 32, 37 Play/t1.3 button (1) . . . . . . . . . . . . . . . . .
M6VP&PC.book 14 ページ 2006年2月6日 月曜日 午後3時29分 STEP 1 Connection This section includes diagrams of two common methods of connection (A-B, pages 14 to 15). Please connect using the one that best suits you. ≥Visit Panasonic’s homepage for more information about connection methods. (This is in English only.) http://www.panasonic.com/consumer_electronics/dvd_recorder/dvd_connection.asp ≥Before doing any connection, turn off all the equipments and read the appropriate operating instructions.
B 2006年2月6日 月曜日 午後3時29分 Connection with a television and cable box or satellite receiver Television AUDIO IN VIDEO IN R L Cable from wall or antenna signal VHF/UHF RF IN Red White Yell Yellow ellow 75 h coaxial cable Audio/Video cable (Included) This unit’s rear panel 5 STEP 1 Connection M6VP&PC.
M6VP&PC.book 16 ページ 2006年2月6日 月曜日 午後3時29分 STEP 1 Connection To enjoy higher picture quality ∫ Connecting to the TV S VIDEO IN terminal ∫ Connecting to the TV COMPONENT VIDEO IN terminals S VIDEO OUT terminal The S VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal. (Actual results depend on the television.
2006年2月6日 月曜日 午後3時29分 Connecting with an HDMI (High Definition Multimedia Interface) terminal HDMI is the next-generation interface for digital devices. When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Definition Television), the output can be switched to 1080i or 720p HD video.
M6VP&PC.
2006年2月6日 月曜日 午後3時29分 ∫ If the clock is an hour slower or faster than the actual time Select “j1” or “i1” in “Adjust Time Zone” in the Setup menu (l 63). STEP 2 Plug-in Auto Tuning M6VP&PC.book 19 ページ ∫ Adding and deleting channels Add or delete channels if necessary channels are not set or unnecessary channels are set. [1] Press the numeric buttons to select a channel. ∫ Restart Plug-in Auto Tuning (after relocation, for example) Antenna Mode (Airwaves) e.g.
M6VP&PC.book 20 ページ 2006年2月6日 月曜日 午後3時29分 Other settings ∫ Manual Channel Captions TRACKING/V-LOCK DVD/VHS ≥Follow steps 1 to 4 of “Channel captions”. POWER [5] Select “Manual Channel Captions” with [3, 4] and press [ENTER]. [6] Use [3, 4] to select the channel and press [1]. POWER Í VOLUME DRIVE CH SELECT TV/VIDEO ≥Channels are only displayed if they contain a station and if preset captions have not been added.
2006年2月6日 月曜日 午後3時29分 Television operation To turn the TV on/off, change the TV input mode, select the TV channel and change the TV volume by means of this remote control, set the remote control as follows. Point the remote control at the TV While pressing [Í, POWER TV], enter the code using the numeric buttons. e.g., 0250: press [0] > [2] > [5] > [0]. Manufacturer and Code No.
M6VP&PC.book 22 ページ 2006年2月6日 月曜日 午後3時29分 Other settings ≥Time Zone shows the time difference from Greenwich Mean Time (GMT).
2006年2月6日 月曜日 午後3時29分 Other settings M6VP&PC.book 23 ページ Removing Interference Connection (without Audio/Video cable) only TV screen Picture with interference In some cases, interference (lines or patterning) or a very poor picture may appear on the TV when the DVD Recorder is connected. If this happens, follow the steps below to change the video playback channel (RF output channel) to remove the interference. [1] Press [FUNCTIONS] for more than 5 seconds.
M6VP&PC.book 24 ページ 2006年2月6日 月曜日 午後3時29分 Recording television programs Inserting a video cassette DVD/VHS The surface on which you can see a roll of tape should face up, POWER POWER Í DRIVE CH SELECT TV/VIDEO DRIVE SELECT VOLUME Insert a video cassette.
2006年2月6日 月曜日 午後3時29分 Recording procedures [6] Press [¥, REC] to start recording. Recording television programs M6VP&PC.book 25 ページ [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] [RAM] [-R] [-R]DL] [-RW‹V›] ≥You can record up to 99 titles on a disc. [+R] [+R]DL] [+RW] ≥You can record up to 49 titles on a disc. ≥It is not possible to record digital broadcasts that allow “One time only recording” onto DVD-R, DVD-R DL, DVD-RW, +R, +R DL, +RW or 8 cm (3q) DVD-RAM discs.
M6VP&PC.book 26 ページ 2006年2月6日 月曜日 午後3時29分 Recording television programs XP DVD/VHS POWER POWER SP DRIVE SELECT VOLUME Picture quality DRIVE CH SELECT TV/VIDEO TRACKING/V-LOCK 1 2 3 4 5 6 7 8 9 INPUT CANCEL 0 SELECT CH ADD/DLT CH SLOW/SEARCH SKIP/INDEX REW ∫ STOP PAUSE TIME SLIP/ JET REW PLAY CM SKIP FR (Flexible Recording mode l 29): ≥You can set FR mode when transferring (copying) or programming scheduled recordings.
2006年2月6日 月曜日 午後3時29分 ∫ Off Timer Selecting audio to record The unit automatically switches to standby when it has not been used for about 6 hours. You can turn this feature off or change the time to 2 hours. (l 63, “Off Timer”) ∫ When the format confirmation screen is displayed [RAM] [-RW‹V›] [+R] [+R]DL] [+RW] When you insert a new disc and a disc recorded on a computer or other equipment, a format confirmation screen might be displayed. Format the disc to use it.
M6VP&PC.book 28 ページ 2006年2月6日 月曜日 午後3時29分 Recording television programs Playing while you are recording DVD/VHS [RAM] POWER POWER DRIVE SELECT DRIVE CH SELECT TV/VIDEO TRACKING/ TR CKING/V-LOC -LOCK 1 2 3 4 5 6 7 8 9 INPUT CANCEL 0 SELECT RESET STOP CH, W, X TV/VIDEO REW PAUSE TIME SLIP/ JET REW ∫ Playing from the beginning of the title you are recording–Chasing playback DELETE You can start play from the beginning of the title while continuing to record it.
2006年2月6日 月曜日 午後3時29分 Flexible Recording (Recording that fits the remaining disc space) [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] The unit calculates a recording rate that enables the recording to fit in the time you set (within the remaining time on the disc) with the best picture quality. Using “FLEXIBLE RECORDING” is convenient in these kind of situations.
M6VP&PC.book 30 ページ 2006年2月6日 月曜日 午後3時29分 Scheduled Recording [2] Press [ENTER], to move and change the items using [3, 4, 2, 1].
2006年2月6日 月曜日 午後3時29分 ∫ Check, change or delete programs ∫ Cancel scheduled recording that has already begun Preparation ≥Select the drive with the scheduled recording you want to cancel by pressing [DRIVE SELECT]. Even when the unit is turned off, you can display the scheduled recording list by pressing [SCHEDULE]. [1] Press [SCHEDULE]. Schedule List [1] When unit is on Press [∫, STOP]. [2] Remain No Channel Date ≥Confirmation screen appears.
M6VP&PC.book 32 ページ 2006年2月6日 月曜日 午後3時29分 Playing discs ∫ When a menu screen appears on the TV [VCD] Press the numeric buttons to select an item. e.g.: “5”: [0] )[5] “15”: [1] )[5] [DVD-A] [DVD-V] Press [3, 4, 2, 1] to select an item and press [ENTER]. ≥You can sometimes use the numeric buttons to select an item.
2006年2月6日 月曜日 午後3時29分 Skipping Skipping the specified time — Time Slip [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD] During play or while paused Press [:, SKIP] or [9, SKIP]. ≥Each press increases the number of skips.
M6VP&PC.book 34 ページ 2006年2月6日 月曜日 午後3時29分 Using menus to play MP3 and still pictures (JPEG/TIFF) ∫ To show other groups DVD/VHS Press [:] (Prev.) or [9] (Next) to show other pages. ≥After listing all the tracks in one group, the list for the next group appears.
2006年2月6日 月曜日 午後3時29分 [3] Press [3, 4, 2, 1] to select the album and press [ENTER]. To show Pictures Menu [CD] [with MP3 files and still pictures (JPEG/TIFF)] [1] Press [FUNCTIONS]. [2] Select “Menu” with [3, 4] and press [ENTER]. [3] Select “Pictures” with [3, 4] and press [ENTER]. FUNCTIONS Menu Album Name My album Playback Mode: MP3 CD(MP3/JPEG) Menu Program Multimedia content Music and pictures on disc. Please select playback mode.
M6VP&PC.book 36 ページ 2006年2月6日 月曜日 午後3時29分 Using menus to play MP3 and still pictures (JPEG/TIFF) [CD] [1] While the Picture View screen is displayed Press [3, 4, 2, 1] to 12_02_2005 F [RAM] [SD] ≥Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding. 1/1 select “Folder” and press [ENTER]. ASelected folder no./Total folder no. BYou cannot select folders that contain no compatible files. [1] Press [STATUS] twice.
M6VP&PC.book 37 ページ 2006年2月6日 月曜日 午後3時29分 [1] Press [Í, DVD/VHS POWER] to turn the unit on. [2] Select VHS side with pressing [DRIVE SELECT]. [3] Select the unit viewing channel (e.g. the AV input) on the TV. [4] Insert a recorded video cassette. (l 24) [5] Press [1, PLAY].
M6VP&PC.book 38 ページ 2006年2月6日 月曜日 午後3時29分 Playing a video cassette Adjusting the playback picture ∫ Manual tracking The unit usually makes tracking adjustments, but you may need to do it manually if noise appears on a tape recorded on other equipment. During play Various on-screen display indications On-screen display below appears during play on VHS. To see these displays, set the “Status Messages” item in the “Setup” to “Automatic”. (l 65) Press [STATUS].
M6VP&PC.book 39 ページ 2006年2月6日 月曜日 午後3時29分 Using on-screen menus 1 Disc menu-Setting disc content DVD/VHS [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] POWER POWER DRIVE CH SELECT TV/VIDEO DRIVE SELECT VOLUME Soundtrack [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] The disc’s audio attributes appear.
M6VP&PC.book 40 ページ 2006年2月6日 月曜日 午後3時29分 Using on-screen menus/FUNCTIONS window and Status messages 1 Video menu-Change picture quality FUNCTIONS window [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] By using the FUNCTIONS window you can access the main functions quickly and easily.
M6VP&PC.book 41 ページ 2006年2月6日 月曜日 午後3時29分 Editing titles/Chapters and playing chapters DVD/VHS POWER POWER DRIVE CH SELECT TV/VIDEO DRIVE SELECT Note ≥Once deleted, divided or shortened, the title cannot be restored to its original state. Make certain before proceeding.
M6VP&PC.book 42 ページ 2006年2月6日 月曜日 午後3時29分 Editing titles/chapters [5] Select “Yes” with [2] and press [ENTER]. DVD/VHS Set Protection POWER Set title protection. DRIVE CH SELECT TV/VIDEO DRIVE SELECT VOLUME Yes 10 10/23 Mon 1 2 3 4 5 6 7 8 9 INPUT CANCEL 0 SELECT REW PAUSE TIME SLIP/ JET REW CH DVD-RAM ADD/DLT CH Yes Cancel Protection: The padlock mark disappears.
2006年2月6日 月曜日 午後3時29分 1 Divide Title 1 Delete Chapter [RAM] ≥Follow steps 1 to 3 of “Edit Title”. [RAM] (“Multiple editing” l 41) ≥Follow steps 1 to 5 of “View Chapters”. You can divide a selected title into two. You must be careful when dividing a title because it cannot be recovered after the procedure. Once deleted, the recorded contents are lost and cannot be restored. Make certain before proceeding. [4] Select “Divide Title” with [3, 4] and press [ENTER].
M6VP&PC.book 44 ページ 2006年2月6日 月曜日 午後3時29分 Creating, editing and playing playlist [3] Select “Playlists” with [3, 4] and press [ENTER]. DVD/VHS POWER ≥The Playlist View appears.
2006年2月6日 月曜日 午後3時29分 [4] Use [3, 4, 2, 1] to select a playlist and press [ENTER]. ≥Chapters are not displayed if you have not yet created a playlist with the disc. ≥You can also select a playlist from the Playlist View by entering a 2-digit number with the numeric buttons. e.g.: “5”: [0] )[5] “15”: [1] )[5] ≥If you enter a number larger than the total number of playlists, “Create” is selected. ≥“To show other pages” l 41 ∫ Properties [RAM] [-RW‹VR›] ≥Follow steps 1 to 5 of “Editing playlists/chapters”.
M6VP&PC.book 46 ページ 2006年2月6日 月曜日 午後3時29分 Creating, editing and playing playlist 1 Change Thumbnail ≥Follow steps 1 to 5 of “Edit”. You can change the image to be shown as a thumbnail picture in the Playlist View. [6] Select “Change Thumbnail” with [3, 4] and press [ENTER]. [7] Press [1, PLAY] to play. [8] Press [ENTER] at the point you want to display. PLAYLISTS Change Thumbnail DVD-RAM ; 08 Change Exit 0:00.00 Change 0:00.00 Start play and select the thumbnail position.
M6VP&PC.book 47 ページ 2006年2月6日 月曜日 午後3時29分 ∫ To return to the previous screen DVD/VHS Press [RETURN]. POWER POWER DRIVE SELECT ∫ To exit the screen DRIVE CH SELECT TV/VIDEO Press [DIRECT NAVIGATOR]. VOLUME Various operations ∫ To show other pages TRACKING/V-LOCK 1 2 3 4 5 6 7 8 9 INPUT CANCEL 0 SELECT Numeric buttons RESET :, 9 SKIP/INDEX ∫ STOP CH DELETE SLOW/SEARCH ∫ Multiple editing REW Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat) A check mark appears.
M6VP&PC.book 48 ページ 2006年2月6日 月曜日 午後3時29分 Editing still pictures ∫ Edit Album DVD/VHS You can perform various kinds of album editing. POWER POWER DRIVE CH SELECT TV/VIDEO [1] Press [DIRECT NAVIGATOR]. [2] [RAM] Press the [B] button to select “Picture”. [3] Press [3, 4, 2, 1] to select the album. VOLUME TRACKING/V-LOCK 1 2 3 4 5 6 7 8 9 INPUT CANCEL 0 SELECT ∫ CH ≥“To show other pages” l 47 DELETE RESET SLOW/SEARCH SKIP/INDEX REW STOP PAUSE TIME SLIP/ JET REW [4] Press [SUB MENU].
M6VP&PC.book 49 ページ 2006年2月6日 月曜日 午後3時29分 Before transferring (copying) You can select from a variety of methods to transfer (copy) on the unit. You cannot transfer (copy) titles which have been treated to prevent copying.
M6VP&PC.book 50 ページ 2006年2月6日 月曜日 午後3時29分 Transferring (Copying) Transfer (Copying) from VHS [1] DVD/VHS POWER VOLUME TRACKING/V-LOCK 1 2 3 4 5 6 7 8 9 INPUT CANCEL 0 SELECT Numeric buttons e.g.; [RAM] Press and hold [“ DVD] on the main unit for about 3 seconds or more (until “START” on the unit’s display terminates flashing).
2006年2月6日 月曜日 午後3時29分 [6] Make sure “Start Copying” is selected and press [ENTER]. ∫ GUI (Graphical User Interface) Transfer (Copying) [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] You can transfer (copy) programs recorded on a tape onto a disc°° from the location° of playback as of the transfer (copying) start of the tape. ° When you set the recording mode to “FR” and “Time Limit” to “Off”, you can transfer (copy) the whole tape from the beginning to the end.
M6VP&PC.book 52 ページ 2006年2月6日 月曜日 午後3時29分 Transferring (Copying) Transfer (Copying) from DVD ∫ One Touch Transfer (Copying) (DVD l VHS) You can transfer (copy) titles recorded on a disc° onto a tape with one touch of the button. In One Touch Transfer (copying), all contents on the disc are automatically copied onto the tape. ° Available discs for transfer (copying) onto tape are [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›].
2006年2月6日 月曜日 午後3時29分 ∫ To set for the registration ∫ GUI (Graphical User Interface) Transfer (Copying) VHS SP Video 0 DVD DVD ≥Insert the disc containing the program to be copied (l 24). VHS ≥ Insert a video cassette with an accidental erasure prevention tab. (l 11, 24) ≥Confirm that the remaining tape time is sufficient for recording. (l 40) 07 DVD Video SP ∫ To Change the setting Create List 0 Video Recording Mode SP [6] Make sure to select “Start Copying” and press [ENTER].
M6VP&PC.book 54 ページ 2006年2月6日 月曜日 午後3時29分 Transferring (Copying) ∫ Transfer (Copying) a DVD-Video, finalized DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, or +R DL To edit the transfer (copying) list Select the item in step 5 (4). (l 53) [1] Select a desired item with [3, 4] and press [SUB MENU]. [2] Press [3, 4] to select the operation and press [ENTER]. Clear All Add Remove Move Clear All: Clear all items registered on the transfer (copying) list. ≥Press [2, 1] to select “Yes” and press [ENTER].
2006年2月6日 月曜日 午後3時29分 Transfer (Copying) still picture ∫ Copying all the still pictures on a card —Copy All Pictures DVD/VHS POWER POWER DRIVE SELECT Numeric buttons ∫ [SD] > [RAM] DRIVE CH SELECT TV/VIDEO VOLUME Preparation ≥Select the unit viewing channel (e.g. AV input) on the TV. ≥Release protection (disc l 60, cartridge l 60). [RAM] ≥Insert a disc and confirm there is sufficient empty space for recording on it (l 24, 40). ≥Inserting, Removing the SD card.
M6VP&PC.book 56 ページ 2006年2月6日 月曜日 午後3時29分 Transferring (Copying) [5] Register still pictures for transfer (copying). Copy Destination capacity: Cancel All Picture/Folder 4341MB DVD/VHS Picture Copying Direction No. Size Title Name ≥If you are going to transfer a New Entry (Total = 0) Mode registered list without making Create List any changes to it, press [4], then skip to step 6. ≥You can register still pictures or still picture folders.
M6VP&PC.book 57 ページ 2006年2月6日 月曜日 午後3時29分 Transferring (Copying) ≥Start playing the video cassette and find the recording start point. [4] Press [;, PAUSE], then press [¥, REC]. ≥Put the unit in recording standby mode. IN 2 S VIDEO VIDEO [5] Start play on the external device. [6] Press [;, PAUSE] at the point where you want to start recording. L /MONO AUDIO R ∫ To skip unwanted parts (1) (2) (3) Press [;, PAUSE] to pause recording. (Press again to restart recording.
M6VP&PC.book 58 ページ 2006年2月6日 月曜日 午後3時29分 Entering text [2] Use [3, 4, 2, 1] to select the character you want to enter and press [ENTER]. DVD/VHS POWER Repeat this step to enter other characters. ≥To erase a character Press [3, 4, 2, 1] to select the character in the name field and press [;, PAUSE].
M6VP&PC.book 59 ページ 2006年2月6日 月曜日 午後3時29分 Preparation ≥Release protection (disc l 60, cartridge l 60, card l 60). [RAM] [SD] ≥Insert a disc or card. ≥Press [DRIVE SELECT] to select the drive (DVD or SD). Deleting title or picture during play [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [SD] Once title is deleted, it cannot be restored. Make certain before proceeding.
M6VP&PC.book 60 ページ 2006年2月6日 月曜日 午後3時29分 DVD and card Management Providing a disc with a name DVD/VHS POWER [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] ≥Follow steps 1 to 3 of “DVD and card Management”. POWER VOLUME DRIVE CH SELECT TV/VIDEO DRIVE SELECT [4] Select “Disc Name” with [3, 4] and press [ENTER].
2006年2月6日 月曜日 午後3時29分 Deleting all contents of a disc or card –Format [RAM] [-RW‹V›] [+RW] [-RW‹VR›] [SD] [+R] [+R]DL] (New disc only) ≥Follow steps 1 to 3 of “DVD and card Management”. Formatting deletes all contents (including computer data), and they cannot be restored. Check carefully before proceeding. The contents are deleted when you format a disc even if you have set protection. [4] Select “Format Disc (DVD)” or “Format memory card” with [3, 4] and press [ENTER].
M6VP&PC.book 62 ページ 2006年2月6日 月曜日 午後3時29分 DVD and card Management Creating Top Menu –Create DVD Top Menu DVD/VHS POWER POWER Í DRIVE SELECT Numeric buttons [+RW] ≥Follow steps 1 to 3 of “DVD and card Management”. VOLUME DRIVE CH SELECT TV/VIDEO +RW discs contain no Top Menu data. Top menu is a convenient function. We recommend you to create the menu before playing a +RW disc on other equipment.
M6VP&PC.book 63 ページ 2006年2月6日 月曜日 午後3時29分 Common procedures Summary of settings Use the following procedure to change the settings if necessary. [1] While stopped FUNCTIONS No Disc No Disc Press [FUNCTIONS]. ≥ Program [2] Select “Other Functions” with [3, 4] and press [ENTER]. [3] Select “Setup” with [3, 4] and press [ENTER]. This description shows the initial settings for the unit. For details on menu operation. (l left) ≥Underlined items are the factory default settings.
M6VP&PC.book 64 ページ 2006年2月6日 月曜日 午後3時29分 Changing the unit’s settings ≥ Underlined items are the factory default settings. Output Level (Component) ∫ Disc Settings for Playback Adjusts the black level of the output signal from the COMPONENT VIDEO OUT (Y/PB/PR) terminals. [Lighter] [Normal] [Darker] Press [ENTER] to show the following settings. Ratings (“Entering a password (Ratings)” l 63) Set a ratings level to limit DVD-Video play.
2006年2月6日 月曜日 午後3時29分 ≥ Underlined items are the factory default settings. HDMI Connection Speakers Setting ∫ Display / Status Messages You can set the unit to output the best possible sound for your speakers. [Auto] [Multi Channel] [2 Channel] Choose whether to show status messages automatically or not. [Automatic] [Off] On-screen Language Choose the language for these menus and the on-screen messages.
M6VP&PC.book 66 ページ 2006年2月6日 月曜日 午後3時29分 Changing the unit’s settings Changing the speaker setting to suit your speakers Change the speaker setting to suit your speakers L Complete To set the delay time (b) Center a Front (L) b a ms 0.0 C Complete a Front (R) (Effective only when playing multi-channel audio) If either distance c or e is less than d, find the difference in the relevant table and change to the recommended setting.
M6VP&PC.book 67 ページ 2006年2月6日 月曜日 午後3時29分 On the unit’s display Page ≥An error has occurred. The number following “H” or “F” depends on the status of the unit. Check the items in the “Error messages” section and the “Troubleshooting guide”. If the service number still does not disappear after the check, follow the Reset procedure described below. Reset procedure: (“The unit is on but cannot be operated.
M6VP&PC.book 68 ページ 2006年2月6日 月曜日 午後3時29分 Frequently asked questions Set up Page ≥You cannot playback multi-channel sound on this unit without other equipment. You must connect this unit with a HDMI cable or an optical digital cable to an amplifier with a built-in (Dolby Digital or DTS) decoder. ≥An amplifier supporting CPPM and the HDMI standard version 1.1 must be connected to this unit to play multi-channel audio on a DVD-Audio.
M6VP&PC.book 69 ページ 2006年2月6日 月曜日 午後3時29分 Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 77 if you reside in the U.S.A. In other areas, consult your dealer. The following do not indicate a problem with the unit: ≥Regular disc rotating sound. ≥Poor reception due to atmospheric condition. ≥Image disturbance during search.
M6VP&PC.book 70 ページ 2006年2月6日 月曜日 午後3時29分 Troubleshooting guide Picture Page TV reception worsens after connecting the unit. ≥This can occur because the signals are being divided between the unit and other equipment. It can be solved by using a signal booster, available from audio-visual suppliers. – The images from the unit do not appear on the TV.
2006年2月6日 月曜日 午後3時29分 Recording, Scheduled recording, Transfer (Copying), External input Cannot record. Scheduled recording does not work properly. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit can record onto. ≥The disc is unformatted. Format the disc. [RAM] [-RW‹V›] [+R] [+R]DL] [+RW] ≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DVD Management”.
M6VP&PC.book 72 ページ 2006年2月6日 月曜日 午後3時29分 Troubleshooting guide Play Play fails to start even when [1, PLAY] is pressed. Play starts but then stops immediately. Page ≥Insert the disc correctly with the label facing up. ≥The disc is dirty. ≥You tried to play a blank disc or a disc that is unplayable on the unit. ≥You tried to play a +RW that needs to be finalized on the equipment used for recording.
2006年2月6日 月曜日 午後3時29分 Still pictures Page ≥This screen cannot be displayed during recording or copy. – Cannot edit or format a card. ≥Release the card’s protection setting. (With some cards, the “Write Protection Off” message sometimes appears on the screen even when protection has been set.) 60 Cannot display Direct Navigator screen. The contents of the card cannot be read. ≥The card format is not compatible with the unit. (The contents on the card may be damaged.
M6VP&PC.book 74 ページ 2006年2月6日 月曜日 午後3時29分 Product Service 1. Damage requiring service — The unit should be serviced by qualified service personnel if: (a)The AC power supply cord or AC adaptor has been damaged; or (b)Objects or liquids have gotten into the unit; or (c)The unit has been exposed to rain; or (d)The unit does not operate normally or exhibits a marked change in performance; or (e)The unit has been dropped or the cabinet damaged. 2.
M6VP&PC.book 75 ページ 2006年2月6日 月曜日 午後3時29分 Power supply: Power consumption: Standby mode: (Display ON) (Display OFF) AC 120 V, 60 Hz Approx. 29 W Approx. 3.2 W Approx. 3.0 W Recordable discs: DVD-RAM: Ver. 2.0 Ver. 2.1/3X-SPEED DVD-RAM Revision 1.0 Ver. 2.2/5X-SPEED DVD-RAM Revision 2.0 DVD-R: for General Ver. 2.0 for General Ver. 2.0/4X-SPEED DVD-R Revision 1.0 for General Ver. 2.x/8X-SPEED DVD-R Revision 3.0 for General Ver. 2.x/16X-SPEED DVD-R Revision 6.0 for DL Ver. 3.0 for DL Ver. 3.
M6VP&PC.book 76 ページ 2006年2月6日 月曜日 午後3時29分 Glossary Bitstream HDMI (High-Definition Multimedia Interface) This is a signal compressed and converted into digital form. It is converted back to a multi-channel audio signal, e.g., 5.1-channel, by a decoder. HDMI is a next-generation digital interface for consumer electronic products. Unlike conventional connections, it transmits uncompressed digital video and audio signals on a single cable.
M6VP&PC.book 77 ページ 2006年2月6日 月曜日 午後3時29分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094 Glossary/Limited Warranty Limited Warranty Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.
M6VP&PC.
M6VP&PC.book 79 ページ 2006年2月6日 月曜日 午後3時29分 ≥Antes de hacer la conexión, apague todos los equipos y lea los manuales de instrucciones apropiados. ≥El equipo periférico y los cables opcionales se venden por separado a menos que se indique lo contrario. Para su referencia ≥Las conexiones del equipo descritas son ejemplos. ≥El equipo periférico y los cables opcionales se venden por separado a menos que se indique lo contrario.
M6VP&PC.book 80 ページ 2006年2月6日 月曜日 午後3時29分 Instalación básica [6] Pulse [3, 4] para seleccionar “Sintonizador” o “Entrada” y pulse [ENTER]. DVD/VHS POWER DRIVE SELECT Botones numéricos DRIVE CH SELECT TV/VIDEO VOLUME TRACKING/V-LOCK 1 2 3 4 5 6 7 8 9 INPUT CANCEL 0 SELECT RESET CH CH, W, X [7] Pulse [ENTER] para iniciar la sintonización automática por Plug-in. ≥La unidad procede con el ajuste automático del reloj. La hora aparece cuando esté terminado dicho ajuste.
M6VP&PC.book 81 ページ 2006年2月6日 月曜日 午後3時29分 Insertar discos Procedimientos de grabación [1] Pulse [<, OPEN/CLOSE] en la unidad principal para abrir la bandeja. ≥Puede insertar un disco de cartucho o sin cartucho. [2] Pulse [<, OPEN/CLOSE] en la unidad principal para cerrar la bandeja. ≥Si inserta un DVD-RAM con la lengüeta de protección contra la escritura ajustada en “PROTECT”, la reproducción inicia automáticamente.
M6VP&PC.
2006年2月6日 月曜日 午後3時29分 Reproducir DVD mientras graba VHS Puede reproducir discos mientras graba VHS. La grabación no quedará afectada. ≥Reproducción DVD (l 84) Para su referencia ≥No puede grabar en discos mientras graba VHS.
M6VP&PC.
2006年2月6日 月曜日 午後3時29分 Salto [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD] Durante la reproducción o mientras está en pausa Pulse [:, SKIP] o [9, SKIP]. ≥Cada pulsación aumenta el número de saltos. Reproducción de cámara lenta [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] (Partes de imagen móvil solamente) [DVD-V] [-RW‹VR›] [VCD] Durante la pausa Pulse [6, SLOW/SEARCH] o [5, SLOW/ SEARCH].
M6VP&PC.
M6VP&PC.book 87 ページ 2006年2月6日 月曜日 午後3時29分 Angle ............................................................................................. 39 Antenna System........................................................................... 19 Audio attributes ..................................................................................... 39 channel ....................................................................................... 39 language ........................................................
M6VP&PC.book 89 ページ 2006年2月6日 月曜日 午後3時29分 \ Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS 2.0iDigital Out” are trademarks of Digital Theater Systems, Inc. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.