Operating Instructions
26
RQT9193
Advanced timer recording
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Programme” and press [OK].
3 Press [1] to move through the items
and change the items with [3, 4].
≥When “Name” is selected, you can press the “Blue” button to
change the profile [e.g., TV, Radio, edited profiles (> 60)]
and then press [3, 4] to select the channel you want to
record.
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Name (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
Titles recorded using the same daily or weekly timer are
bundled and displayed as a “group” in the Direct Navigator
screen (> 30) except when using Auto Renewal Recording.
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (> right).
≥You can also press [REC MODE] to change the recording
mode.
≥[HDD] RENEW (Auto Renewal Recording) (> right)
ON!)OFF
≥Programme Name
Press [2, 1] to select “Programme Name” and press [OK].
(> 39, Entering text)
≥STTL (Subtitles)
ON!)OFF
When the “Name” column is set in AV1, AV2 or AV3, On/Off
setting is unavailable.
You can also press [STTL ] to switch “STTL” setting.
When there are multiple languages, select the subtitle
(> 61, DVB Preferred Language).
4 Press [OK].
The timer programme is stored and the timer icon is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [Í DVD] to turn the unit off.
1 While the unit is on
Press [DRIVE SELECT] to select the
recording drive and press [∫].
2 Press [2, 1] to select “Stop
Recording” and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press the “Red” button.
≥The timer icon “F” (> 27) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon “F” (> 27) remains in the timer
recording list.
≥Press the “Red” button again to activate timer recording
standby.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the “HDD”. If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
recorded (“ ” is displayed.) (> 30).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly recording or daily
recording is selected.
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press [OK].
3 Press [2, 1] to select “RENEW”
column.
4 Press [3, 4] to select “ON” and press
[OK].
Manually programming timer
recordings
[.
l
l
l
l
a.
Date: Current date up to one month later minus
one day
;:
Daily timer: SUN-SAT>MON-SAT>MON-FRI
;:
Weekly timer: SUN>--->SAT
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
Mode
StopStart
No.
Date
STTL
HDD
DVD
Name
Drive
space
New Timer Programme
TUE 14.10.08. 12:54:00
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
Mode
StopStartName Date
STTL
HDD
DVD
22:30 22:00
21. 10. TUE
OFF HDD
1 Das E
Programme Name
SP
TV :Das Erste
TUE 14.10.08. 12:54:00
No.
Name
Das E
01
Timer icon
Check to make sure “OK” is
displayed (> 27).
Mode
Stop
STTL
HDD
DVD
HDD
Drive
space
SP
OK
22:30
OFF
ogramme
TUE 14.10.08. 12:56:00
To cancel recording when recording
has already begun
To release the unit from recording
standby
Relief Recording
Auto Renewal Recording
Stop Recording
Stop Recording
Cancel
Timer recording in progress.
Stop this timer recording?
It will be cancelled if you stop.
OK
RETURN
SELECT
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 14.10.08. 12:53:00
Mode
StopStartName Date
STTL
HDD
DVD
22:30 22:00 SUN OFF HDD
1 Das E
Programme Name
SP
RENEW
ON
DMR-EX81SEG_RQT9193.book 26 ページ ２００８年７月２８日 月曜日 午後５時２９分