Operating Instructions

27
RQT9193
[Note]
≥If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
≥When there is not enough space on the HDD, the programme may
not be recorded completely.
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
A Icons
B Message displayed in the “Drive space” line
C Channel name, programme name and other
information are displayed.
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (> 26,
left column, step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select “Delete” and press [OK].
∫ To exit the timer recording list
Press [PROG/CHECK].
[Note]
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
In timer recording of digital broadcast with multi-audio or multi-
subtitle, audio and subtitle language to be recorded will follow the
setting of “DVB Preferred Language” in the Setup menu (> 61).
≥When a timer recording is set, DVDs that were recorded using a
different TV system cannot be played unless the TV system is
changed in the Setup menu (> 65) or the timer recording has
completed or has been cancelled.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode (> 46).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
the “F” flashes on the unit’s display.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Check, change or delete a programme
F Timer recording standby is activated.
[ This programme is currently recording.
Programmes are overlapped. Recording of the
programme with the later start time starts when the
earlier programme finishes recording.
You stopped a weekly or daily timer recording. The icon
disappears the next time the timer programme starts
recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
X The programme did not complete recording because
the disc is dirty or some other reason.
Timer programmes set to Auto Renewal Recording
(> 26).
Titles that have been rerouted to the HDD
(Displayed while recording.)
HDD Recording drive is set to HDD
DVD Recording drive is set to DVD
OK: Displayed if the recording can fit in the
remaining space.
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made
(up to a maximum of one month from the
present time) based on the time remaining on
the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
Relief: Timer programmes that will be relief recorded to
the HDD.
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 14.10.08. 12:53:00
RETURN
OK
Press OK to store new programme.
Mode StopStart No. Date
STTL
HDD
DVD
Name
Drive
space
New Timer Programme
*
Language for digital broadcast with
multi-audio or multi-subtitle
Notes on timer recording
Programme
Programme
Recorded Recorded
Not recorded
Advanced timer recording
DMR-EX81SEG_RQT9193.book 27 ページ ２００８年７月２８日 月曜日 午後５時２９分