Operating Instructions

52
RQT9193
Copying still pictures
7 Press [3, 4] to select “Start
Copying” and press [OK].
≥Only when copying individual still pictures from [HDD] to
[RAM]
When specifying another folder as the copying destination,
select “Folder”.
8 Press [2, 1] to select “Yes” and
press [OK] to start copying.
To stop copying
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
[Note]
≥The sequence in which the still pictures are registered on the copy
list may not be the same at the copy destination.
≥If still pictures are already contained inside the copy destination
folder, the new still pictures are recorded following the existing still
pictures.
≥If the space on the destination drive runs out or the number of files/
folders to be copied exceeds the maximum (> 13), copying will
stop partway through.
≥You cannot copy the information about the picture rotation.
∫ To edit the copying list
Select the item in step 6–4 (for a still picture) or 6–6
(for a folder) (> 51)
1 Press [OPTION].
2 Press [3, 4] to select the operation and press
[OK].
Delete All:
Delete all items registered on the copying list.
Press [2, 1] to select “Yes” and press [OK].
Add:
Add new items to the copying list.
1 Press [3, 4, 2, 1] to select the still picture or folder and press
[;].
A check mark is displayed. Repeat this step until you select all
necessary items.
≥Press [;] again to cancel.
2 Press [OK].
Delete:
Delete the selected items.
Press [2, 1] to select “Yes” and press [OK].
To cancel all registered copying settings and lists
After performing steps 1–3 (> 51, Copying using the copying list)
1 Press [3, 4] to select “Cancel All” and press [OK].
2 Press [2, 1] to select “Yes” and press [OK].
≥The settings and lists may be cancelled in the following situations.
– When a title or still picture has been recorded or deleted at the
copy source
– When steps have been taken, for instance, to turn off the unit,
open the tray, change the copy direction, etc.
∫ To select another folder
After performing steps 6–2 (> 51, To register individual still
pictures)
1 Press [3, 4, 2, 1] to select “Folder” and press [OK].
2 Press [3, 4] to select the folder and press [OK].
You can also select folders with the numbered buttons.
e.g.,
≥The still pictures of different folders cannot be registered on the
same list.
To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[OK].
≥You can also press [:, 9] to show other pages.
Folder
New folder
001 100__DVD
002 101__DVD
003 102__DVD
---
-
New folder
--
Add
Delete
Delete All
5:
15:
115:
[0] > [0] >[5]
[0] > [1] > [5]
[1] > [1] > [5]
Create List Picture (JPEG)
Previous
001/001
Next
Folder 103__DVD
---- ---- ----
OK
RETURN
Page
0001
0002
0003
0004
----
----
----
---- ----
OK
RETURN
Folder
Create List
DVD-RAM DVD-RAM
Page 01/01
Picture 0012 File 0012
001 100__DVD
002 101__DVD
003 102__DVD
---
\DCIM\100__DVD
---
---
---
004 103__DVD
DMR-EX81SEG_RQT9193.book 52 ページ ２００８年７月２８日 月曜日 午後５時２９分