Operating Instructions

61
RQT9193
Press [3, 4] to select “DVB Preferred Language” and press [OK].
You can select up to 2 different subtitles and audio tracks to be used
when audio and subtitles digital broadcasts are received. Select the
order of priority.
If the selected language is not available, then the original language
will be selected.
Multi-Audio
§
Multi-Audio (alternative)
Subtitle
§
Subtitle (alternative)
§
The default language will be same as the language of the country
selected in the Country Setting of Auto-Setup.
In Advanced Setup, you can set up additional satellites and make
adjustments to your satellite system.
To receive several satellites with one dish, e.g. Astra 19.2ºE and Hot
Bird 13°E, you need a Multifeed dish combined with a DiSEqC
switch between the receiver of your dish (LNB) and the DVD
Recorder. Your dish must be equipped with two offset universal
LNBs.
∫ Satellite Configuration
Preparation
1 Press [3, 4] to select “Advanced Setup” and press [OK].
2 Press [3, 4] to select “Satellite Configuration” and press [OK].
Setting up the DiSEqC/LNBs
1 Press [3, 4] to select “DiSEqC/LNBs” and press [1].
2 Press [3, 4] to select “DiSEqC” and press [OK].
3 Press [3, 4] to select “Number of LNBs” and press [OK].
≥[1] to [4] can be set up.
≥One LNB is default (LNB A). You need one LNB for each
satellite you want to receive.
4 Press [3, 4] to select “Switching Voltage” and press [OK].
≥It is Voltage for horizontal and vertical polarisation switching.
Add Satellite
1 After setting “DiSEqC/LNBs”, press [3, 4] to select “LNB A” to
“LNB D” and press [1].
≥As an example, if “Number of LNBs” is set to “1”, only “LNB A”
can be selected.
2 Press [3, 4] to select “Add Satellite” and press [OK].
Select “Yes” when “Start scan?” is displayed. Search for the
digital satellite station that can be received by the selected LNB
will start.
3 Select “Yes” by pressing [2, 1] when the confirmation message
asking to save the setting is displayed, and then press [OK].
When Universal LNB is not used:
1 Press [3, 4] to select “LNB Freq. Low” and press [1] and then
press [OK].
2 Press [3, 4, 2, 1] to select the corresponding LNB frequency
for “LNB Freq. Low” and press [OK].
3 Press [3, 4] to select “LNB Freq. High” and press [1] and then
press [OK].
4 Press [3, 4, 2, 1] to select the corresponding LNB frequency
for “LNB Freq. High” and press [OK].
≥If you cannot find the LNB frequency corresponding to your
system, select “----- MHz (User Def.)” and enter value with
numbered buttons and then press [OK].
≥The LNB converts the signals from the satellite into a
corresponding frequency range for the DVB-S receiver.
≥The standard setting for LNB Freq. Low is “9750 MHz (Universal)”
and for LNB Freq. High is “10600 MHz (Universal)”.
Delete Satellite
1 Press [3, 4] to select the required LNB and press [1].
2 Press [3, 4] to select “Delete Satellite” and press [OK].
Select “Yes” when the confirmation message is displayed and
press [OK].
The satellite is deleted. Deleting the satellite and corresponding
stations can take some time.
≥Together with the satellite, the EPG data are also deleted.
DVB Preferred Language
[English] [German] [Italian] [French]
[Czech] [Hungarian] [Polish]
[English] [German] [Italian] [French]
[Czech] [Hungarian] [Polish]
[English] [German] [Italian] [French]
[Czech] [Hungarian] [Polish]
[English
] [German] [Italian] [French]
[Czech] [Hungarian] [Polish]
Advanced Setup
[Auto] Automatic search for LNB and DiSEqC switch
[Mini DiSEqC] Up to 2 LNBs can be controlled.
[DiSEqC] Up to 4 LNBs can be controlled.
[No]
Compatible with Single LNB
[13/18 V
] Standard setting
[14/19 V] The voltage can be increased to 14/19 V for long cable
distances or multiswitch type.
Satellite
Configuration
DiSEqC
Number of LNBs
Auto
1
Switching Voltage
13/18V
LNB A
LNB B
LNB C
LNB D
DiSEqC/LNBs
LNB Freq. Low
[9750 MHz (Universal)
] [10000 MHz] [10250 MHz]
[10600 MHz] [10750 MHz] [----- MHz (User Def.)]
LNB Freq. High
[9750 MHz] [10000 MHz] [10250 MHz]
[10600 MHz (Universal)
] [10750 MHz]
[----- MHz (User Def.)]
Satellite
Configuration
Add Satellite
Delete Satellite
Sattellite: Astra 19.2˚E
LNB Freq. Low
Universal
LNB Freq. High
Universal
LNB A
LNB B
LNB C
LNB D
DiSEqC/LNBs
Add Satellite
0 % 100 %
Searching for Satellite
Found: Astra 19.2˚E
Add Satellite
0% 100%
Prog. TV/RadioTransp. Freq Service Name
Satellite : Astra 19.2˚E
1TV
TV
TV
TV
TV
2
3
4
5
XXXXX MHz
XXXXX MHz
XXXXX MHz
XXXXX MHz
XXXXX MHz
Das Erste
ZDF
RTL Television
SAT. 1
VOX
Changing the unit’s settings
DMR-EX81SEG_RQT9193.book 61 ページ ２００８年７月２８日 月曜日 午後５時２９分