Operating Instructions

62
RQT9193
Changing the unit’s settings
∫ Add Transponder/Service
There are several transponders on one satellite. Each transponder
can transmit several TV and radio programmes and data in parallel.
You can obtain the satellite, transponder and programme data from
each particular station provider or on the internet.
Preparation
1 Press [3, 4] to select “Advanced Setup” and press [OK].
2 Press [3, 4] to select “Add Transponder/Service” and press
[OK].
3 Press [3, 4] to select the satellite and press [1].
Add Transponder
1 Press [3, 4] to select “Transponder Frequency” and press [OK].
2 Enter value with numbered buttons and then press [OK].
3 Press [3, 4] to select “Polarisation”, “Symbol Rate” and “FEC”,
press [OK] and then perform necessary setup.
4 Press [3, 4] to select “Add Transponder”, and then press [OK].
≥The search for the entered transponder and all its stations
begins.
≥The found transponder is stored.
5 Press [OK] when the message disappears.
Service Data
If you want to add just one single station of a transponder, first enter
the transponder data as described left.
1 Press [3, 4] to select “Service Data” and press [OK].
2 Press [3, 4] to select the following PID and press [OK].
≥The data flow from the satellite consists of many data
packages. Each data package has an identification number
describing the contents of the package.
3 Enter value with numbered buttons and then press [OK].
4 Press [3, 4] to select “Add Service” and press [OK].
The search for the required station begins.
∫ Delete Transponder
1 Press [3, 4] to select “Advanced Setup” and press [OK].
2 Press [3, 4] to select “Delete Transponder” and press [OK].
3 Press [3, 4] to select the satellite and press [OK].
4 Press [2, 1] to select “Yes”.
≥The transponder is deleted.
≥Together with the transponder, the EPG data are also deleted.
Polarisation
[Horizontal] [Vertical]
≥Polarisation indicates whether the transponder transmits
the satellite signal horizontally or vertically.
Symbol Rate
[22000 ksym/s] [27500 ksym/s] [28000 ksym/s]
[30000 ksym/s] [----- ksym/s (User Def.)]
≥Data flow transmission rate from the satellite to the dish.
FEC (forward error correction)
[Auto] [1/2] [2/3] [3/4] [5/6] [7/8]
≥The transmitted signal contains redundant data which
allows the receiver to detect and correct errors. With the
[Auto] setting, the unit selects error correction.
Add Transponder/
Service
Transponder Frequency
Polarisation
Symbol Rate
22000 ksym/s
FEC
Service Data
Add Transponder
Auto
0 MHz
Horizontal
LNB B
LNB C
LNB D
Astra
19.2˚E
Video PID Package ID No. for video data.
Audio PID Package ID No. for audio data, e.g. audio for
various languages.
PCR PID Package ID No. for programme clock reference.
AC3 PID Package ID No. for Dolby Surround.
Add Transponder/
Service
Service Data
Video PID
Audio PID
PCR PID
1279
AC3 PID
Add Service
----
1279
----
LNB B
LNB C
LNB D
Astra
19.2˚E
Delete
Transponder
10744 MHz, H
LNB B
LNB C
LNB D
Astra
19.2˚E
10832 MHz, H
10921 MHz, H
10979 MHz, V
11509 MHz, V
11538 MHz, V
11586 MHz, V
11597 MHz, V
11685 MHz, V
DMR-EX81SEG_RQT9193.book 62 ページ ２００８年７月２８日 月曜日 午後５時２９分