Operating Instructions

64
RQT9193
Changing the unit’s settings
(All factory default settings are indicated with underlined text.)
(All factory default settings are indicated with underlined text.)
§1
The default language will be same as the language of the country
selected in the Country Setting of Auto-Setup.
§2
When “Česká republika” is selected in the Country Setting of
Auto-Setup
Sound
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
[On] [Off
]
Bilingual Audio Selection
When recording bilingual programmes from equipment connected
to the DV IN terminal of this unit, select whether to record the main
or secondary audio type.
[M 1
][M2]
Digital Audio Output
Change the settings when you have connected equipment
through this unit’s DIGITAL AUDIO OUT terminal (> 70).
≥Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
≥Signals are converted to 48 kHz despite the settings below if
the signals have a sampling frequency of over 96 kHz, or the
disc has copy protection.
[On] Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with a
sampling frequency of 96 kHz.)
[Off
] Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with a
sampling frequency of 96 kHz.)
Dolby Digital
Select how to output the signal.
Select “Bitstream” if the connected equipment decodes the
signal.
Select “PCM” if this unit decodes the signal and outputs it as 2
channels.
≥Not making the proper settings may result in noise.
[Bitstream
] When connecting to equipment displaying the
Dolby Digital logo.
[PCM] When connecting to equipment not displaying the
Dolby Digital logo.
DTS
Select how to output the signal.
Select “Bitstream” if the connected
equipment decodes the signal.
Select “PCM” if this unit decodes the signal
and outputs it as 2 channels.
≥Not making the proper settings may
result in noise.
[Bitstream
] When connecting to equipment displaying the
DTS logo.
[PCM] When connecting to equipment not displaying the
DTS logo.
MPEG
Select how to output the signal.
Select “Bitstream” if the connected equipment decodes the
signal.
Select “PCM” if this unit decodes the signal and outputs it as 2
channels.
≥Not making the proper settings may result in noise.
[Bitstream] When connected to equipment with a built-in
MPEG decoder.
[PCM
] When connected to equipment without a built-in
MPEG decoder.
Audio Mode for XP Recording
Choose the audio type when recording or copying with XP mode.
[Dolby Digital
] (> 84) [LPCM] (> 84)
≥The picture quality of LPCM recordings may be lower than that of
normal XP mode recordings.
≥The audio recording becomes Dolby Digital even if you selected
LPCM when using a recording mode other than XP.
Audio Mode for DV Input
You can select the kind of audio when recording from the unit’s DV
input terminal (> 25).
[Stereo 1
] Records audio (L1, R1).
[Stereo 2] Records added audio such as narration (L2, R2)
subsequent to original recording.
[Mix] Records both Stereo 1 and Stereo 2.
≥When recording bilingual broadcast, select the type of audio in
advance from “Bilingual Audio Selection” (> left).
Display
Language
§1
Choose the language for these menus and on-screen messages.
[English] [Deutsch] [Français] [Italiano]
[Česky]
On-Screen Messages
Choose the approximate time until the digital channel information
screen (> 16) disappears automatically.
The length of time the control panel (> 37) is displayed can also
be changed, but “Off” does not work.
[Off] (The digital channel information is not displayed.)
[3 sec.] [5 sec.
] [7 sec.] [10 sec.]
FL Display
Changes the brightness of the unit’s display.
This setting is fixed with “Automatic” if you set “Power Save”
(> 66) to “On”.
[Bright
][Dim]
[Automatic] The display turns dark during play and disappears
when the unit is turned off. It reappears
momentarily if a button is pressed. While using this
mode, the standby power consumption can be
reduced.
Pause Live TV Icon
Select “Off” if you do not want to have the unit show the on-screen
icon while using the Pause Live TV function.
[On
] [Off]
Teletext Character Set
Select Teletext language.
[West
] English, French, German, Greek, Italian, Spanish,
Swedish, Turkish, etc.
[East1] Czech, English, Estonian, Lettish, Rumanian,
Russian, Ukrainian, etc.
[East2
]
§2
Czech, Hungarian, Lettish, Polish, Rumanian, etc.
DMR-EX81SEG_RQT9193.book 64 ページ ２００８年７月２８日 月曜日 午後５時２９分