Operating Instructions

66
RQT9193
Changing the unit’s settings
(All factory default settings are indicated with underlined text.)
AV2 Settings
Set to match the connected equipment.
≥Press [OK] to show the following settings.
AV2 Input
Set to “RGB/Video” or “RGB” when receiving or recording RGB
output from external equipment.
[RGB/Video
] [RGB] [Video] [S Video]
Ext Link
This setting cannot be made when the “TV System” is set to
“NTSC” (> 65).
[Ext Link 1] When a digital receiver which transmits a special
control signal recordings via the 21-pin Scart
cable is connected.
Start and stop timings of recording are controlled
by the control signal.
[Ext Link 2
] When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.
Common Interface
This indicates how to cancel the broadcast scrambling, conduct a
card number inquiry when the broadcast cannot be received, CI
status, etc. (> 9)
Others
Remote Control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic
products close together.
[DVD 1
] [DVD 2] [DVD 3]
Use “DVD 1”, the factory set code, under normal circumstances.
1 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or
“DVD 3”) and press [OK].
To change the code on the remote control
2 While pressing [OK], press and hold the numbered button
([1], [2] or [3]) for more than 5 seconds.
3 Press [OK].
∫ When the following indicator appears on the
unit’s display
The unit’s remote control code
Change the code on the remote control to match the main unit’s
(> step 2).
[Note]
Executing “Shipping Condition” in the Setup menu returns the
main unit code to “DVD 1”. Change the remote control code to 1
(> step 2).
Setup
Tuning
Remote Control
Press “#” and “OK” together
for more than 5 seconds on the remote
control.
Disc
Picture
Clock
This unit usually obtains time and date information from digital
broadcasts and automatically corrects the time several times a
day. However, if the time is not set correctly use the settings listed
in the method below.
≥In the case of a power failure, the clock setting remains in
memory for approximately 60 minutes.
1
Press [ 3, 4] to select “Off” of “Automatic” and press [OK].
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Yea r
^-----------------------------------------------------------------------------------------J
3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
[Note]
If a TV station transmits a time setting signal, and when
“Automatic” in the Clock setting menu is set to “On”, the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.
∫ To change the time offset
When the time is not correct, select the region that matches where
you live and set “Time offset” (from –3h to +3h).
1 Press [3, 4] to select “On” of “Automatic” and press [OK] in
step 1.
Auto clock setting starts. This takes a few minutes.
“Automatic clock setting completed.” screen is displayed.
2 Press [3, 4] to select the correct time offset and press [OK].
3 Press [OK].
4 Press [RETURN].
Power Save
[On] Power consumption is minimized when the unit is turned to
standby (> 83).
[Off
]
(If “Quick Start” is set to “On”, “Power Save” is automatically
turned to “Off”.)
≥Refer to the following when “Power Save” is set to “On”.
– “FL Display” is automatically set to “Automatic” (> 64).
– The “Quick Start” function does not work. (It is automatically
turned to “Off”.)
Clock
Time
Automatic
Time offset
Date
Auto
Please set clock manually.
OK: store RETURN: leave
OK
RETURN
SELECT
CHANGE
15 : 45 : 39 3 . 8 . 2008
Off
0 9
Number
Time offset > below
DMR-EX81SEG_RQT9193.book 66 ページ ２００８年７月２８日 月曜日 午後５時２９分