Operating Instructions

13
RQT9118
Disc Handling
Usable Discs for Recording and Playback
Disc type Rewritable
Play on other
players
※1
Recording 16:9 aspect
picture
※2
Copy-once recording (CPRM)
(➔ 21)
Standard symbol
DVD-RAM
CPRM (➔ 72)
compatible discs only.
RAM
DVD-R
——
-R
before finalisation
DVD-V
after finalisation
DVD-R DL
——
-R DL
before finalisation
DVD-V
after finalisation
DVD-RW
—
-RW(V)
before finalisation
DVD-V
after finalisation
+R —
— (4:3 aspect) —
+R
before finalisation
DVD-V
after finalisation
+R DL —
— (4:3 aspect) —
+R DL
before finalisation
DVD-V
after finalisation
+RW
— (4:3 aspect) —
+RW
: Can do, −: Cannot do
※1
-R -R DL -RW(V) +R +R DL
Finalisation needed for playback on other equipment (➔ 49).
RAM
can be played back on Panasonic DVD recorders and
DVD-RAM compatible DVD players.
-R DL
,
+R DL
or
+RW
can be played back only on equipment
compatible with these discs.
※2 For further information (➔ 21, Important Notes for Recording).
RAM -RW(V) +R +R DL
+RW
To use a new disc, formatting is
necessary (➔ 48).
+RW
If the disc failed to play on other equipment, we recommend
you create top menu (➔ 49).
Use of Panasonic discs is recommended.
For available recording times for different discs under different
recording modes, see “Recording Modes and Durations” on page 22.
Formatting and/or recording/initializing constraints may prevent you
from playing or recording certain discs.
Please see specifications (➔ 74) for compatible disc versions and
recording speeds.
•
•
•
•
Notes
RAM
will show an increase in available space whenever a title has
been erased.
-RW(V)
and
+RW
discs will only show an increase in available
space when their last title has been erased.
-R -R DL +R +R DL
The discs will show no increase in available
space after deleting titles.
You may not be able to record depending on the condition of the
discs and you may not be able to play them due to the condition of
the recording.
•
•
•
•
Disc Care
RAM
Use cartridges to protect them from scratches and dirt.
Holding a disc
Handle discs by the edges to avoid inadvertently scratching or getting
oil from your fingers on the disc. Do not touch the signal surface of
discs (the shiny side).
Cleaning discs
Discs are not indestructible and occasionally dirt or condensation
may appear. Clean by gently wiping with a soft, dry lint-free cloth in a
straight line from the centre of the disc to the edge of the disc.
Return discs to their cases when not in use; this helps to protect
against scratches and dirt.
Storing discs
Do not place or store discs in the following locations:
Direct sunlight
Very dusty or humid areas
Near a heat source
Places that undergo extreme shifts in temperature (condensation can
occur)
Where static electricity or electromagnetic waves occur
Discs to avoid
Discs that are not perfectly circular in shape
Warped discs, which may not balance properly in your unit, causing
improper operation or damage to the unit
Cracked discs
Discs with exposed adhesive (from removed stickers or labels, such
as may occur with rental discs or improperly cared-for discs that were
previously labeled or re-labeled)
•
•
•
•
•
•
•
•
•
Quick Start Guide
STEP 3
DMR-EZ28-EB _RQT9118-B.indb 13DMR-EZ28-EB _RQT9118-B.indb 13 2008/04/04 10:31:492008/04/04 10:31:49