Operating Instructions

19
RQT9118
Basic Operations
Timer Recording
Tips
RAM
-RW(V)
+R
+R DL
+RW
To use a new disc, formatting is necessary.
To check programmes ( 29)
To cancel a timer recording
programming
1. Press [
e
,
r
,
w
,
q
] to select the
programme (the timer icon is displayed)
and press [OK].
– Confirmation screen appears.
2. Press [
w
,
q
] to select “Yes” and press
[OK].
The timer icon disappears.
Notes
The TV Guide list is not displayed
immediately after purchasing this unit.
The TV Guide system will not work if the
clock is not set correctly.
If “NTSC” has been selected for “TV
System” (55), the TV Guide system
cannot be used.
“FR” recording mode is not available
when the timer programme is controlled
by “Guide Link”.
What is Freeview built-in?
Freeview built-in is a function that enables timer recordings to be controlled
by the signal sent from the broadcaster. “Guide Link” is available.
“Guide Link” — If you set a timer recording from the TV Guide,
recording start and stop times can be controlled by the broadcaster,
e.g., delayed start.
This is indicated by “Guide Link” in the Timer Recording screen in step
( below).
If you set a timer recording from the TV Guide, the recording’s
start and stop times are controlled by the signal sent from the
broadcaster. If the signal is not sent correctly, the recording may
lack the beginning or the ending part of the programmes.
In order to make the timer recording work successfully, we recommend
you set the start time earlier and the end time later by some minutes,
up to a maximum of 10 minutes for Guide Link to function.
e.g. When you set the timer recording for a programme that will start
at 10:00 and end at 11:00, set “9:58” and “11:05” in step ( below).
Refer to “TV Guide” ( 30) and “Advanced Timer Recording” ( 27) for detail
information on TV Guide.
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit.
Turn on this unit.
Insert a disc that you use for recording ( 14).
RAM
If the disc is protected, release protection ( 48).
Confirm that the clock on the unit’s display is set to the correct time.
The TV Guide list appears.
e
,
r
,
w
,
q
to select the future programme, then
Press OK to store the programme.
Timer
Recording
OK
RETURN
DELETE
Name Date Start Stop Mode STTL
P
rogramme Name
Remain 1:54 SP
MON 18/02/08 19:35:16
3 BBC
6/ 3 THU
20:20
SP O FF
Holliday Programme
(Guide Link)
Number
0
9
All Services:BBC 2
Holliday Programme
20:20-22:00 Holliday Programme
19:30 20:00 20:30 21:00 21:30
Red Cap
The Bill
Terminator2
News
ScrapheapChallenge
Pepsi Chart Show
Mon 18/02/08 19:35
Category
All Services
Category
Page +
Page -
SELECT
RETURN
TV Guide: Landscape
Time:
1 BBC1
2 BBC2
7 ITV1
10
Channel4
31
Channel5
45 ITV2
70 S4C
HotWars
News
Sex in the City
Me out of here!
Pop Idol
Rugby
15 to 1
Scrapheap Challenge
Corotation Street
Mon 18th
+24 Hr-24 Hr Prog. Type
TIMER REC
info
Chan ge Di spl ay Mod e
Gui de
CSI NY
Emmerd
Prog. Type
All Types
DIYS.O.S.
Holliday Programme
22:00
“Guide Link” is displayed here.
Confirm the programme (start and end time) by
TV magazine, etc. and correct if necessary using
e
,
r
,
w
,
q
, then
The settings are stored and the timer programme
is on.
The timer icon is displayed.
z
lights on the unit’s display to indicate timer
recording standby has been activated.
Repeat steps - to programme other recordings.
Press [
8
] to turn the unit off.
Timer icon
20:00 20:30 21:00 21:30
DIYS.O.S.
Holliday Programme
Red Cap
“Guide Link” will not be displayed and will not function under the following conditions.
Timer programmes set manually ( 27).
Timer programmes set from the TV Guide are modified or start/stop time changed by more
than 10 minutes from original time.
DMR-EZ28-EB _RQT9118-B.indb 19DMR-EZ28-EB _RQT9118-B.indb 19 2008/04/04 10:31:552008/04/04 10:31:55