Operating Instructions

28
RQT9118
The timer icon is displayed in left column.
NameNo.
7/
7/
BBC101
g
“
z
” lights on the unit’s display to indicate
timer recording standby has been activated.
Repeat steps – to programme other
recordings.
Press [
8
] to turn the unit off.
–
–
–
–
Notes
“
z
” on the unit’s display flashes when the unit cannot go to timer
recording standby. (e.g., a recordable disc is not in the disc tray).
When timer recordings are set to start one immediately after another,
the unit cannot record the beginning of the later programme.
If two timer recording times overlap, the first recording always has
priority. The second recording will start only after the first recording
has finished.
Recorded subtitles cannot be deleted later.
Timer Recording does not start while a disc is being formatted,
deleted or finalised. The recording begins afterwards.
When “Name” is set in AV1, AV2 or AV3, STTL setting is unavailable.
Tips
To exit the timer recording list
Press [PROG/CHECK].
“Date” Setting
Each press of [
e
] changes items in the order below.
(Each press of [
r
] changes items in the reverse order.)
Daily timerWeekly timer
One month later
minus one day
Current date
SAT
---
---
SUN
SUN-SAT
MON-SAT
MON-FRI
You can also use the numbered buttons to enter “Name”, “Date”,
“Start” and “Stop”.
You can also press [REC MODE] to switch “Mode” and press
[STTL ] to switch “STTL”.
•
•
•
•
•
•
•
•
•
To cancel a timer recording in progress
While the unit is on
Confirmation screen appears.–
w
to select “Stop Recording”,
then
Notes
Recording stops and the timer programme is deleted. (Daily and
weekly timer programmes remain and timer recording will start from
the next time the timer recording is set.)
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)
See “ Timer Recording screen icons” (➔ 29)
for explanation of icons displayed.
–
e, r to select the programme.
(Red)
“
z
” (➔ 29) disappears from the timer
recording list.
Press the “Red” button again to activate timer
programme.
–
–
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform steps – (➔ above)
1. Press [OPTION].
2. Press [
e
,
r
] to select “Timer Off”, then press [OK].
Advanced Timer Recording
DMR-EZ28-EB _RQT9118-B.indb 28DMR-EZ28-EB _RQT9118-B.indb 28 2008/04/04 10:32:022008/04/04 10:32:02