Operating Instructions

56
RQT9118
System Settings
To Others Setup
(➔ 50, Accessing the Setup Menu)
All factory default settings are indicated with “Underlined” text.
Others
e
,
r
select “Others” ➔
q
➔
e
,
r
select item ➔
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Remote Control
Clock
Owner ID
Power Save
DVD 1
SELECT
TAB
RETURN
System Update
On
Initialize
Remote Control (➔ 65)
[DVD 1] [DVD 2] [DVD 3]
Clock (➔ 12)
Owner ID (➔ 11)
In order to prevent another person from using this unit if it is
stolen, you can set a PIN number and input your personal
information.
Once the PIN number has been set, you cannot return to the
factory preset. Make sure not to forget this.
PIN number
Name
House No.
Postcode
•
•
•
•
Power Save
[On] [Off]
Refer to the following when “Power Save” is set to “On”.
Power consumption is minimized when the unit is turned off
(➔ 74).
Startup of the unit becomes slower compared to when “Power
Save” is “Off”.
When the unit is off, satellite programmes cannot be watched on
the TV because the signal from the satellite receiver connected
to AV2 input terminal of this unit is not looped through. To watch
them, turn on the unit.
•
•
•
System Update
In order to update this unit, the TV Guide download, and support
system changes made by broadcasts, this unit periodically
performs software updates.
Press [OK] to show the following settings.
Update data and TV Guide download information are sent by an
unscheduled digital broadcast. In order to receive these updates,
you must be able to receive digital broadcasts.
An update will take approximately 60 minutes. While the update
is in progress,“SW-DL” appears on the unit’s display.
You cannot operate the unit until the update is complete.
Removing the AC mains lead while the update is in progress
may damage the unit.
A TV Guide download will take approximately 30 minutes.
While the TV Guide download is in progress, “GUIDE” appears
on the unit’s display. The TV Guide download can be interrupted
by switching on the unit.
To avoid hearing the startup sound of System Update for the
unit, perform the following steps.
Select the time for Software Update (➔ below, TV Guide/
Software search period).
Set “TV Guide Download in Standby” and “Software Update in
Standby”(➔ below) to “Off”, and update manually (➔ below,
Software Update Search Now).
TV Guide Download in Standby
[On] When the unit is turned off, TV Guide data is
downloaded automatically.
[Off]
Software Update in Standby
[On] You can perform the unit updates automatically when
the unit is turned off.
[Off]
TV Guide/Software search period
Selects the time to automatically perform TV Guide download
and updates when the unit is turned off. This can only be set
when “TV Guide Download in Standby” and “Software Update in
Standby” is set to “On”.
If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
[Automatic] The unit will give priority to searching for update data
at midnight.
[02:00-06:00] [06:00-10:00] [10:00-14:00]
[14:00-18:00] [18:00-22:00] [22:00-02:00]
•
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not
switch your unit off during the update. This could result in the loss
of data. A message shows that the update has finished. If a new
software version is not going to be broadcast until the next few
days, a corresponding message also appears.
If applicable update data is found, press [
w
,
q
] to select “Yes”
and press [OK].
•
•
•
•
•
•
–
–
Initialize
Press [OK] to show the following settings.
Shipping Condition
This returns Setup menus to default settings, except for the
ratings level, ratings password, Owner ID and Clock setting.
[Yes] [No]
The timer recording programmes are also cancelled.•
Default Settings
This returns Setup menus to default settings, except for the
programmed channels, time settings, disc language settings,
ratings level, ratings password, Owner ID and remote control
code.
[Yes] [No]
DMR-EZ28-EB _RQT9118-B.indb 56DMR-EZ28-EB _RQT9118-B.indb 56 2008/04/04 10:32:292008/04/04 10:32:29